We use Azerk decking and love it. Another great thing about azek decking is that it is very pliable and can be heated and manipulated to make arches, curves or whatever shape you need. I also like azek trim for exterior use.
I wonder how it would hold up in a tropical climate. At any rate I would really like to remove the decking that I have, replace the framing and install Azek. I'm a do it yourselfer and enjoy the work. I've already decided that I will use the counterboring hidden screw method of attachment. Now all I need is to come into a bunch of money, then the most difficult part of the job will be deciding which color to use.
any comment regarding TimberTech Legacy vs Azek boards? Certainly Legacy is heavier (legacy is ~ 51 lbs. for a 20' board) ... any thoughts on other pros and cons? - In addition (and don't take offense) I called Timbertech/Azek directly about Platinum Contractors and the 7 year labor warranty... They said that they never heard of that being an offering. The reason for my call to TT is because I was trying to find a Platinum contractor in my area.
Great video and great product. I too love this deck board. To limit squeaking and to minimize expansion and contraction, I use only square edge with cortex plugs. It seems to move and squeak less when I pin it down every 12", then plug it. Then again, that's just me. In the northeast we have large temperature swings.
Hi- great video Dr Decks; we just installed Azek deck and the electrician dropped a drill from the railing and made a gauge and divit that is larger than a nickel, but smaller than a quarter. Is their anyway to remove/replace a board in the middle of a deck with concealed fasteners? Or should I look to put a cortex compatible plug to conceal? I never heard if that until ur video.
Here are my 2 cents: PVC in the summer heat tends to become "more flexible" if you know what I mean. Trex I installed never had that ... shall we say, problem.
1200sf of the stuff on my deck. It's very loud stuff. snaps, pops and creaks with temperature changes. I think its probably good on small decks in shady areas but the expansion co-efficient multiplies with length, so large decks will be noisy. So much so, people don't want to sit and relax on my deck (self included). 14" OC and fastened with Azek SS screws. Only reason I don't rip it out is because it was 12,000 in decking and screws.
great vids team - do you have a preference between cortex / plug vs concealed fix? ive heard concealed may become loose over time - or is difficult to refix loose boards or obviously replace damaged boards?
Will this work on a boat for upholstery? Attach the marine vinyl to it along with the foam rubber. I need to attach it to the inside of my bow wall. Prob I/2 inch thick is what I need bc I need it to bend. May need to put a heat gun to it. What do you think? I’m trying to get away from wood and guaranteed rot.
Hi - I want to install a herringbone. Can I groove (rout) the end to meet the tongue on the opposing board? All our boards are tongue and groove (not double groove). Thanks!
I WORK AT WEYERHAUSER DC IN TACOMA AND I DEAL WITH AZEK AS WELL AS TIMBER TECH...ITS A DIFFERENT MATERAIL ALSO ITS LIGHT WEIGHT TO DEAL WITH IN WHICH I HAVE TO PACKAGE DIFFERENTLY WHEN DELIVERING ON CUSTOMERS AND "SO FAR" (KNOCK ON WOOD) HAVE NOT YET GOT A COMPLAINT ON DAMAGED PRODUCT....GOOD VIDEO BRUTHA
I thought AZEK decking wasn't available with grooved edges (only PRO and EDGE are). Is this not correct? If AZEK isn't available with grooved edges, what do you recommend for hidden fastening?
Nice overview. I'm very interested in these boards from the Vintage collection.. Any cupping issues you've found thus far with the Azek product? These deckboards will be installed in west-facing sun, so it will get hot in summers.
Could show us what it look likes after 2, 4, 6, 8, and 10 years? How does it smell during the summer time months. I went to one of the stores here and the samples smelled like toxic plastic from china. I did this test, I took the sample and placed it in a thin transparent bag, with no air, and then placed the bag in the sun for 24 hours. The bag inflated with toxic fumes, pee you.....
What about the expansion with pvc? I’ve heard a board can expand up to an inch over 16 feet. Wich scares me as I live in Canada we go from -40c to +40c
Hey Dr. Decks, been loving the videos (they've been a huge help for me!)...down here in Portland, OR. I'm installing Timbertech Azek (coastline) and loving the look. Quick question: Any tips/tricks for Filing down little "high" spots on butt joints where I'm connecting long boards up against vertical boards. Thanks!
Amazing quality decking! Some of my family members have it for their decks. The color hasn't even faded after 5 years and I'm sure it's not going to fade any time soon.
We use Azerk decking and love it. Another great thing about azek decking is that it is very pliable and can be heated and manipulated to make arches, curves or whatever shape you need. I also like azek trim for exterior use.
Scott Kansler you don’t know me yet. I’m one of the top builders when it comes to #deckboardbending
whats the 3rd board color from our view ??
Looking for a nice grey color. Any suggestions only seeing brown shades. All the grey samples look taupe or very dark please help.
Dr. Decks, what do you use for joist tape with Azek? I understand the standard bitumen tapes explicitly say they're incompatible with PVC.
Advantage of fasten master cortex versus clips?
I wonder how it would hold up in a tropical climate. At any rate I would really like to remove the decking that I have, replace the framing and install Azek. I'm a do it yourselfer and enjoy the work. I've already decided that I will use the counterboring hidden screw method of attachment. Now all I need is to come into a bunch of money, then the most difficult part of the job will be deciding which color to use.
On balance do you prefer using hidden fasteners or cortex ?
any comment regarding TimberTech Legacy vs Azek boards? Certainly Legacy is heavier (legacy is ~ 51 lbs. for a 20' board) ... any thoughts on other pros and cons? - In addition (and don't take offense) I called Timbertech/Azek directly about Platinum Contractors and the 7 year labor warranty... They said that they never heard of that being an offering. The reason for my call to TT is because I was trying to find a Platinum contractor in my area.
We are an Azek/Timbertech dealer in Missouri. We love the looks of it too. The contractors really like handling and working with it also. Good stuff!
Agreed!
Great video and great product. I too love this deck board. To limit squeaking and to minimize expansion and contraction, I use only square edge with cortex plugs. It seems to move and squeak less when I pin it down every 12", then plug it. Then again, that's just me. In the northeast we have large temperature swings.
I guess Im kinda randomly asking but do anyone know of a good site to stream new movies online?
@Royal Yahir i watch on FlixZone. Just search on google for it =)
@Konnor Zayn Yup, been using Flixzone for since march myself =)
@Konnor Zayn thanks, I went there and it seems like a nice service =) Appreciate it !!
@Royal Yahir You are welcome :D
Hi- great video Dr Decks; we just installed Azek deck and the electrician dropped a drill from the railing and made a gauge and divit that is larger than a nickel, but smaller than a quarter. Is their anyway to remove/replace a board in the middle of a deck with concealed fasteners?
Or should I look to put a cortex compatible plug to conceal? I never heard if that until ur video.
What sealants are compatible with Azek decking?
have you mounted this to aluminum substrate
Here are my 2 cents:
PVC in the summer heat tends to become "more flexible" if you know what I mean.
Trex I installed never had that ... shall we say, problem.
1200sf of the stuff on my deck. It's very loud stuff. snaps, pops and creaks with temperature changes. I think its probably good on small decks in shady areas but the expansion co-efficient multiplies with length, so large decks will be noisy. So much so, people don't want to sit and relax on my deck (self included). 14" OC and fastened with Azek SS screws. Only reason I don't rip it out is because it was 12,000 in decking and screws.
Wow! love honest report.
great vids team - do you have a preference between cortex / plug vs concealed fix? ive heard concealed may become loose over time - or is difficult to refix loose boards or obviously replace damaged boards?
What is your preferred fastening method?
Will this work on a boat for upholstery? Attach the marine vinyl to it along with the foam rubber. I need to attach it to the inside of my bow wall. Prob I/2 inch thick is what I need bc I need it to bend. May need to put a heat gun to it. What do you think? I’m trying to get away from wood and guaranteed rot.
Too slippery for that application. I would suggest thin metal sheets screwed every 3 inches and then cover in mineral oil.
Does it scratch easily? I live in a wooded area and have lots of visitors like raccoons.
Only if they're wearing high heels.
@@xyzct 😂
Raccons will eat this deck board. Its made from ground up acorns and tea leaf extract
Hi - I want to install a herringbone. Can I groove (rout) the end to meet the tongue on the opposing board? All our boards are tongue and groove (not double groove). Thanks!
Love the video, thanks. Is it easy to remove the cortex plugs, should you have to somewhere down the road?
Yes. Drive a screw into the plug and it will pop out on to the screw
@@drdecks great, thanks!
why don't I see you use the HIDfast nail gun? we use it on almost every job
I WORK AT WEYERHAUSER DC IN TACOMA AND I DEAL WITH AZEK AS WELL AS TIMBER TECH...ITS A DIFFERENT MATERAIL ALSO ITS LIGHT WEIGHT TO DEAL WITH IN WHICH I HAVE TO PACKAGE DIFFERENTLY WHEN DELIVERING ON CUSTOMERS AND "SO FAR" (KNOCK ON WOOD) HAVE NOT YET GOT A COMPLAINT ON DAMAGED PRODUCT....GOOD VIDEO BRUTHA
I appreciate the follow. I'll try to reply sooner. Thank You
More like knock on "composite"
huh huh huh
Dr. Decks, which one do you prefer? Cortex screws or hidden brackets?
I bought both fasteners. going to test tomorrow. I heard with brackets you get noise. Will let you know.
I thought AZEK decking wasn't available with grooved edges (only PRO and EDGE are). Is this not correct? If AZEK isn't available with grooved edges, what do you recommend for hidden fastening?
You thought wrong
Nice overview. I'm very interested in these boards from the Vintage collection..
Any cupping issues you've found thus far with the Azek product? These deckboards will be installed in west-facing sun, so it will get hot in summers.
No issues here
Could show us what it look likes after 2, 4, 6, 8, and 10 years? How does it smell during the summer time months. I went to one of the stores here and the samples smelled like toxic plastic from china. I did this test, I took the sample and placed it in a thin transparent bag, with no air, and then placed the bag in the sun for 24 hours. The bag inflated with toxic fumes, pee you.....
Are you and your deck going to be living in a plastic bag. Silly.
Thank you DR for the great info.
What’s the best miter saw blade and skill saw blade to cut azek with.
Josh Owen high tooth carbide works best.
Where is it manufactured?
Nikotine Scranton, PA
Right next to the Dunder Mifflin offices
Does azek top of the line bent up on the ends?
Could be after shipping and delivery.
Thanks for the video..We are leaning towards the Azek Vintage series. I just read that PVC's expand and contract twice as much as composites do. True?
Are you sponsored by Azek?
What about the expansion with pvc? I’ve heard a board can expand up to an inch over 16 feet. Wich scares me as I live in Canada we go from -40c to +40c
But the logo looks very good.
Kaden Currie AZEK will not expand and contract that much. Perhaps 1/8” to 3/16” in 20’.
@@yodapadawan1825 But very good, the logo looks I would say.
An inch over 16 feet. Your high as fuck
Hey Dr. Decks, been loving the videos (they've been a huge help for me!)...down here in Portland, OR. I'm installing Timbertech Azek (coastline) and loving the look. Quick question: Any tips/tricks for Filing down little "high" spots on butt joints where I'm connecting long boards up against vertical boards. Thanks!
Kelly Morris I use a rasp and break the edge of all cut ends. Hope this helps!
@@drdecks This is great! huge thanks!.
@@kellymorris2299hit me up about a deck design!
Azek is great! I just installed their tounge and groove porch board.
Don't forget you have to make sure your sub-floor is super level.
How do you remove scuffs and scratches
Heat gun
With a belt sander and ax
Cha Ching!
How would this product hold up on the top deck of a boat dock?
Amazing quality decking! Some of my family members have it for their decks. The color hasn't even faded after 5 years and I'm sure it's not going to fade any time soon.