Every craftsman should know how these carbide inserts work when turning metal

A Brief Chat about Carbide Tooling !!!
==================================
Good afternoon, friends!!!
My name is Sergey, I am the author of Cool Ideas DIY channel. On this channel I present everything that I made with my own hands at home. Creative ideas, useful tips, homemade tools and inventions. Welcome to my channel - Cool Ideas DIY!
✅Enjoy watching! Don't forget to subscribe, like, and turn on the bell🔔
==================================
🔥Homemade
🔥DIY
🔥Creative ideas
🔥Make in home
🔥Life hacks
🔥Crafts
🔥Inventions and tools
🔥Usefull and Helpful ideas
🔥Tips and tricks
🔥Welding
🔥Turning work on a lathe
🔥Metal workshop ideas
🔥Making tools from metal
🔥Unique tools that you must have
🔥Waste metal craft ideas
==================================
#Cool #Craft #Diy #Homemade #Welding #Amazing #Ideas
💗Thanks for watching, LIKE, Subscribe & Share!

[@alessandroandrenacci2372]

Thank you very much for your video, i'm just an lathe-hobbist ( from 2006 ) and also use inserts NC3030 as you showed in the video; much of the difference relies on type of steel to be cutted ... "common steel" ( for construction ) is the worst, to my sight of see, better i get with "silver steel". I also use my tool upside down, and opposit direction for the spin ... so i learned parting from u-tube, after so many ... "cracks" ...
Operating so, the chips easily fall down ...
I hightly do appreciate your style of videos, no music, no words ( often unintellegible cause different languages ) ... you just SHOW WHAT IS IT, very clear.
With some indication of your hand and fingers, one can understand if a tool is ok for that work or not ... as in this video ...
And finally your silent suggestions to use goggles for eye protection ... very professional ...
My best greatings from Italy ... were are you instead from ?

[@CoolIdeasDIY-qv1nz]

Grazie e benvenuto nel mio canale!

[@ronmenzies362]

Great video, thanks for the comparison.

[@CoolIdeasDIY-qv1nz]

Thanks, bro.

[@ironhead65]

Thank you again for demonstrating so many types! It is great to have that knowledge so we can easily sort through and pick the right inserts for us!

[@CoolIdeasDIY-qv1nz]

👍🤝🙏

[@mrc1539]

You can sure tell the difference, thanks for the comparison 😊 !

[@CoolIdeasDIY-qv1nz]

Thank you and welcome.

[@foxwhiskey]

Nice test ! Thanks, bro !

[@CoolIdeasDIY-qv1nz]

Thank you and welcome.

[@dnavarroserrano]

👍sobran las palabras👍

[@CoolIdeasDIY-qv1nz]

Gracias y bienvenido a mi canal.

[@TrickandTipDIY]

Good!👍👍👍

[@CoolIdeasDIY-qv1nz]

Thank you very much!

[@user-ct4cl8nb4w]

I encountered this problem and it was solved in the same way. You seem to be brilliant

[@CoolIdeasDIY-qv1nz]

🙏

[@dikkybee4003]

Every schooled tradesman knows about these. What material your using depends on type and speed and feed are given by tip manufacturer.

[@user-fk8qz9wj4l]

You are doing a wonderful job

[@CoolIdeasDIY-qv1nz]

👍🤝🙏

[@DIY-xx1dv]

Good video❤❤❤

[@CoolIdeasDIY-qv1nz]

Thanks bro!

[@hydraulichouse1]

❤❤❤

[@Alejandromundial.]

👍👍👍

[@CoolIdeasDIY-qv1nz]

Thank you very much my friend.

[@oldoldpilgrim7898]

I didn't notice you use any cutting fluid. Is it unnecessary with carbide?

[@CoolIdeasDIY-qv1nz]

I rarely use cutting fluid when I make videos to clearly show the whole metalworking process! Thanks my friend and welcome!

[@zoltannagy1813]

Thanks for the comparison. Were they about the same price, or was one cheaper or more expensive than the rest?

[@CoolIdeasDIY-qv1nz]

They are all about the same price, but the metal cutting quality is different, the last plate is the best as you can see from the shavings! Thank you and welcome!

[@PauloSoares-gm7ru]

Estes insertos trabalham melhor com fluido de corte e não deve existir nenhuma vibração.
O melhor resultado foi o último corte porque é mais próximo da fixação da máquina e teve menor vibração.
A ferramenta também pode ser montada invertida (de cabeça para baixo), reduz a vibração de possível folga no eixo principal da máquina e também facilita a saída de cavacos. 😊👍

[@CoolIdeasDIY-qv1nz]

Concordo consigo, mas o último prato corta melhor, vê-se nas batatas fritas! Bem-vindo!

[@kekodias2145]

Gostei, sem enrolação e sem se quer uma palavra e de uma clareza sólida.

[@CoolIdeasDIY-qv1nz]

🙏🙏🙏

[@bobprice9244]

I've seen a few parting videos but never a side by side comparison of the inserts. I've only recently had luck with parting since I made my own tool holder similar to yours. Previously it was the rocker/lantern style. It's a lathe at work and they won't buy anything for it. It's a welding shop.

[@CoolIdeasDIY-qv1nz]

Welcome my friend.

[@leichen5474]

最后一种最锋利！

[@LOOKATTHISRAFFF]

Nie za duże te obroty ja daje na 280

[@inkoguto69]

te płytki wolą raczej wyższe obroty z tego co słyszałem
ja daję 450 a nawet ok 700 zależy co przecinam, ale robię to bardzo rzadko ;)

[@dataandroid2036]

Hast du keine Stimme?

[@atomscombining9054]

very good

[@CoolIdeasDIY-qv1nz]

Thank you, my friend.

[@user-fk8qz9wj4l]

❤❤❤

[@CoolIdeasDIY-qv1nz]

🤝🙏👍