having owned many glass back phones, and aluminum/titanium/stainless steel, I think I prefer the feel of plastic, it is also far stronger and more resilient. one drop and a glass back is done even with a case. this back will never break. aluminum/stainless/titanium edge dents and scratches you can't repair, but glass fibre reinforced plastic edge is easy to epoxy and airbrush. it still has the aluminum core. I prefer not to touch metal/glass on a phone. its not a comfortable material to handle.
So you disassemble the phone and do your epoxy job on the plastic frame and back whenever the scratches pile up? Also what do you mean by aluminun core? The shiny silver midframe?
@@bulletpunch9317 About the core...obviously. About the scratches...use a cover, to have at least some fall protection. What's the use of a glass or metal back when nearly everyone uses a cover?
@@bulletpunch9317 mask, epoxy fill gouges, sand flat, airbrush with polyurethane/2k, 2k cllearcoat. buff. aluminum core for heat dissapation with glass fibre filled plastic shell is the superior way to build a phone.
@@bulletpunch9317 hes rather meaning that when the plastic scratches its annoying but no biggie, and when its too much scratches he repairs it like mentioned. you could also brush your alu back to fix it, but that could lead to worse feel than scratches.
I love your teardown videos, it reveals the infos I want to know. Example the battery type (Li-ion or Li-poly), they have a huge difference in terms of lifespan but people tend to neglect that info.
@@theoozmachine Li-poly can handle higher watts of charging for up to 180W nowadays. Unlike Li-ion, they can handle only lower watts of charging but longer lifespan due to lower temperature.
I have f6, if you turn on wildboost mode it doesn't even heat, also pubg runs on max settings without heating for me, current rank conquerer 17, (7.9 kd), no lag 120 fps
Tell me how a master of his craft. You've already disassembled smartphones Android a lot. Can you tell me which smartphone model has the loudest sound and loudest vibration motor? I am interested in the flagship models 2023-2024
Hi, I haven't really payed much attention to the vibration motor strengths or really looked into them to give you an educated opinion. Same with the speakers. Size doesn't always mean it would be the loudest or strongest either.
6:44 lmaoo this puts me into so much relief I actually put the sim ejector tool to the hole just beside it and pressed it a Lil too hard and I was worried if it damaged anything inside 😭
No you would need to use either the original pre cut adhesive made for the phone, B-7000 glue or one of the smartphone adhesive strips and cut it down to size.
@@dwisetianto_ why ? most phone now use stack cpu and ram cause of cheap and they want make phone look small and thin. Yeah that high risk ,but with good cooling system or with throttling perfomance can handle SOC without problem, exepct play games without rest.. and at midday ,that can easy damage or break component.
@@UA-camTolol-e2x stacked chip is standart nowdays not because it's cheap, it's for peformance. u can look samsung s24 ultra also stacked, stop talking bulshit and read more.
@@PBKreviews Please answer me. I am confused. Does having the processor and RAM in the same place affect it? I have seen several videos saying that it will stop like the X 3 Pro.
@@bibs_gamingThere were many people like me in the comments who were curious about the cooling system. It would have been more enlightening if you had written where you saw the brain.
Im willing to buy poco f6 but a bit doubtful after i had to reball my mi 10t pro ram and cpu bcs of the blank screen and random reboot that i got. Fast charging also gone not long before my phone had blank screen 😂
stacked chip is standart nowdays not because it's cheap, it's for peformance. u can look samsung s24 ultra also stacked, stop talking bulshit and read more.
@kalyan3285 I heard people had some issues recently so i wasn't sure if getting a poco is a sound decision but don't get me wrong that coud have been misuse on their side but i wasn't sure of that either so i switched to a different manufacturer
Is there a processor above the RAM? Please reply to this comment. Ok I need to answer I know where it is it is above the processor I don't understand English so I asked you but I solved the problem I am translating from my language to English
Me too 😅. I have a problem with Spotify, system failed repeatedly and phone heated like crazy. It seems to have improved but I hesitate to trust it now, I still have 10 days to optionally return the phone.
Design. Why does the camera island on the F6pro and many other phones need to be so over sized? I much prefer the minimalist Samsung 55 series design but companies want to look distinguished I guess.
Finally, someone make this video. There are some technician make the same style of content but no commentary with loud music or just silent hill.
👍 :)
having owned many glass back phones, and aluminum/titanium/stainless steel, I think I prefer the feel of plastic, it is also far stronger and more resilient. one drop and a glass back is done even with a case. this back will never break. aluminum/stainless/titanium edge dents and scratches you can't repair, but glass fibre reinforced plastic edge is easy to epoxy and airbrush. it still has the aluminum core. I prefer not to touch metal/glass on a phone. its not a comfortable material to handle.
So you disassemble the phone and do your epoxy job on the plastic frame and back whenever the scratches pile up?
Also what do you mean by aluminun core? The shiny silver midframe?
@@bulletpunch9317 About the core...obviously. About the scratches...use a cover, to have at least some fall protection.
What's the use of a glass or metal back when nearly everyone uses a cover?
@@DutchmanAmsterdam are you the same guy? I was asking how they repaired the scratches. Seems like a hassle.
@@bulletpunch9317 mask, epoxy fill gouges, sand flat, airbrush with polyurethane/2k, 2k cllearcoat. buff. aluminum core for heat dissapation with glass fibre filled plastic shell is the superior way to build a phone.
@@bulletpunch9317 hes rather meaning that when the plastic scratches its annoying but no biggie, and when its too much scratches he repairs it like mentioned. you could also brush your alu back to fix it, but that could lead to worse feel than scratches.
I love your teardown videos, it reveals the infos I want to know. Example the battery type (Li-ion or Li-poly), they have a huge difference in terms of lifespan but people tend to neglect that info.
So what's the difference? Which one is better
@@theoozmachine 10 years ago you would say li ion, nowdays is just the same
@@theoozmachine Li-poly can handle higher watts of charging for up to 180W nowadays. Unlike Li-ion, they can handle only lower watts of charging but longer lifespan due to lower temperature.
PBK Genius..when tear down the poco f6 pro ??
Not too sure yet will be at least a week or two.
@@PBKreviews ok thanks..💚
So overall this phone is good for gaming ?
Im confused afraid of getting heat bcause of plastic material all this phone
Buy the F5 if you are scared of overheating. The 7 series SD doesn't overheat easily.
I have f6, if you turn on wildboost mode it doesn't even heat, also pubg runs on max settings without heating for me, current rank conquerer 17, (7.9 kd), no lag 120 fps
Cooling seems to be much better than f5, no foam between back plate and graphite sheet. but is there an air gap?
Sir, I have a question, who is the best in the quality of manufacturing, poco f6 or poco x6 pro
F6
Still no tear down of the ZenFone 11 Ultra that I'm waiting for before my purchase to see its great cooling system 🌬️🔥
I will look into it but not sure when I will do it if I do decide on it.
@@PBKreviews OK I understand, buying it is more expensive than Poco smartphones or Galaxy A55/35, since it's a flagship... 😕☹️
how is the pcb , is it good sir ?
Yes
so where do you place the phone cooler?
The one he mentioned as Vapour chamber.(The very last part he showed with shiny surface)
Is the RAM higher than the processor?
It's about time ,thank you 😊
no prob
I pushed the sim ejection tool on the microphone hole by mistake but looks like it cannot be damaged that easy, what a dumb mistake on my end
You should be fine, the filter and mic are seated above the hole so won't be damaged. :)
Hahaha same .
Hey bro can u reply. I was mistaken when inserted sim injector into microphone. I thought it was sim one. Is it okay? I hope you reply it asap
Yes its okay
@PBKreviews so it's not directly into the microphone? There is barrier?
Tell me how a master of his craft. You've already disassembled smartphones Android a lot. Can you tell me which smartphone model has the loudest sound and loudest vibration motor? I am interested in the flagship models 2023-2024
Hi, I haven't really payed much attention to the vibration motor strengths or really looked into them to give you an educated opinion. Same with the speakers. Size doesn't always mean it would be the loudest or strongest either.
@@PBKreviews Can you make a video on your smartphone IQOO 12 5G smartphone?
software or hardware proximity sensor?
hardware
No brother it's software proximity sensor@@PBKreviews
@Manojkums2002 hardware in f6
Which one is the cooling system?
The one he mentioned as Vapour chamber
O meu está rangindo a tampa traseira, será que pode ser a cola?
can you open the vibration motor?
You dont need to heat ot with hair dryer man just charge it up
6:44 lmaoo this puts me into so much relief I actually put the sim ejector tool to the hole just beside it and pressed it a Lil too hard and I was worried if it damaged anything inside 😭
Does it have the same problem as the Poco X3 Pro with the processor above the RAM?
The back of my phones is opening up unfortunately. Can i use regular glue to stick it back ?
No you would need to use either the original pre cut adhesive made for the phone, B-7000 glue or one of the smartphone adhesive strips and cut it down to size.
@PBKreviews ok thank you
Was the vapor chamber material not made of copper?
nope
What pry pic is best for mobile opening?
Ifixit picks are the best
Are the cpu and ram stacked in one place?
yes
@@PBKreviews oh No🤦
@@dwisetianto_ why ? most phone now use stack cpu and ram cause of cheap and they want make phone look small and thin. Yeah that high risk ,but with good cooling system or with throttling perfomance can handle SOC without problem, exepct play games without rest.. and at midday ,that can easy damage or break component.
@@UA-camTolol-e2x stacked chip is standart nowdays not because it's cheap, it's for peformance.
u can look samsung s24 ultra also stacked, stop talking bulshit and read more.
@@PBKreviews Please answer me. I am confused. Does having the processor and RAM in the same place affect it? I have seen several videos saying that it will stop like the X 3 Pro.
Brother, will this phone malfunction like the POCO X3 PRO (processor)?
Yes the i readed else where the ram under the proceccer
all phones nowadays use stacked ram like that dude. not just Snapdragon.@@Omaroii
Did you replace the battery cause online it says li-poly but in the video it says li-ion
It says an li-on polymer battery so it is an lipo battery
Thank you😊🙏
You're welcome
Does the microphone have a SIM card-limiting pin mis-insertion design? (L-shaped channel or cushion, etc.) Can’t see clearly in the video
yes it have
What is flash storage chip model??
Only Samsung ram showing in video...
What cooling system used?
Vapour chamber plus graphite film.
Finally i relaxed after watching your because i accidentally put pin in microphone in my new poco f6
Thank you
:) you're welcome
Same sentiment haha 😂
Is that proximity sensor is virtual or physical......
physical
Thank you, nice phone.❤
You're welcome
The frame feels solid and made of metal, but is it actually fiber-reinforced plastic?
Can i put poco f6 screen and battery on redmi turbo 3?
So the ram stacked on the top of cpu
what is that mean sir?
@@jakabudiman5124 ram nya numpuk diatas cpu
yup
Is that bad or???
@@Hm-cd2wjNo, standard with flagship phones too.
You doing nice 💪
Thanks 👍
that's why i love phone teardown video . can see phone cooling design
👍
Where is the cooling system? I couldn't see it. Is there one in this device?
are you blind? lol
@@bibs_gamingThere were many people like me in the comments who were curious about the cooling system. It would have been more enlightening if you had written where you saw the brain.
@@ByCINAR 😂
Thank you❤🎉
You're welcome
Nice video i am buy this phone
My dream phone.
I have 😅
Simple teardown, almost same like f3, worth to buy because I've teardown my f3 & repaste+replace battery easier
👍
Is battery is dual cell or single cell
Single
Sir can you review the infinix gt 20pro it's a gaming phone and i want buy it can you that next to see if the cooling system is good?
Hi, I currently don't have plans for doing that phone. The cost vs views on that line of phone doesn't justify me purchasing it.
poor battery life and very hot device 😂
@@PBKreviewsi hope you got more and more views so you can do more of these videos.
Guys should i update my poco F6 to hyperos 1.0.4.0?
Where is its power management ic
plaease do with motorola edge 50 fusion i am very eager to see its disassembly no one has done yet indian audience will attratct by this video
I'll look into it, I haven't planned on doing it yet but will see.
Which is better poco f6 or iqoo z9 turbo which one have better heat dissipation?
Redmi turbo 3. It's cheaper than both of them and has similar spec of Poco f6.
Заднюю панель могли бы на защёлках сделать! Смысл клеить пластик ?
What poco have stack chipset
And highrisk motherboard??
Im willing to buy poco f6 but a bit doubtful after i had to reball my mi 10t pro ram and cpu bcs of the blank screen and random reboot that i got. Fast charging also gone not long before my phone had blank screen 😂
stacked chip is standart nowdays not because it's cheap, it's for peformance.
u can look samsung s24 ultra also stacked, stop talking bulshit and read more.
Thank you so much, i thought i broke the microphone mesh in the first day od using it 😂😂
I'm curious about the liquid cooling
Wow ternyata sudah ada sheet thermalnya, duh udah terlanjur beli sheet graphite untuk external, 😢
Where is the liquid cool technology?
that vapor chamber he talks about underneath the battery
Ice loop!
Could this phone have motherboard issues like the poco x3 pro ??
Did you find out bro ?well I want to know the same
@kalyan3285 I heard people had some issues recently so i wasn't sure if getting a poco is a sound decision but don't get me wrong that coud have been misuse on their side but i wasn't sure of that either so i switched to a different manufacturer
Is there a processor above the RAM? Please reply to this comment. Ok I need to answer I know where it is it is above the processor I don't understand English so I asked you but I solved the problem I am translating from my language to English
@PBK Genius 1+Nord ce4 disassembly
soon
moto edge 50 fusion is far better in camera
Nice Good 👍👍👍👍
👍
love from Bangladesh
👍
so the X6 pro have better heat dissipation than this. F6 have less copper sheets to transfer heat 💀
No, graphite film works fine.
In official website there is ice loop, liquid cool
And where is the test point?
Can i put realme 5500 mah battery in this device
nope, wont fit and connector would be different probably as well.
Bro backside i taught aluminum 😮
Good 👍
👍
Please do Samsung C55 next :)
Does is even exist
No Liquid Cooling inside this phone 😮😢
Where is liquid cool ice loop
The one he mentioned as Vapour chamber.(The very last part he showed with shiny surface)
so poco doesn't use dual battery like oneplus,even though it charges fast at 90w.
it use dual battery, has two conector
5:16
better cooling system on poco F6 or Realme GT 6? thanx
How do you rate the quality of the phone.
Please teardown Huawei mate 50 pro
Poco f6 pro next..and review is goodd or not please 🙏
Hopefully soon
F6 pro please, i want know inside f6 pro good or not.
Soon waiting for it to come in
Going bact to use a plastic back phone after a glass one feels so sturdy that the plastic is so fragile
Bro you said the opposite 😂
hate that big camera frame
Me too, it's ridiculous, but the big camera Isle on the F6pro is even worse imo.
Nice
Thanks
my future phone (if not expensive), if expensive them i going buy poco x6 pro
Want to see ASUS Zenfone 11 disassembly
I think poco f6 Not yet able to distribute heat properly
Same opinion
I didn't see liquid cool, ice loop!
@@Joseph77youIs there one? I didn't see it?
@@Joseph77youIs there one? I didn't see it?
Lava blaze curve 5g teardown video please
MIAD-01, which he tore down in an earlier video, is the Lava Blaze Curve with a headphone jac, sd card slot and DACS lol.
Bro please do teardown for realme gt 6t
will have it done soon
Samsung C55 Please.......)
Z9 Turbo, Please.🙏 ❤
I currently don't have plans for that model. IQOO phones don't get many views on my channel to justify me spending the money on the phones.
@@PBKreviews 😍🥰
Watching on POCO F6
👍
Me too 😅.
I have a problem with Spotify, system failed repeatedly and phone heated like crazy. It seems to have improved but I hesitate to trust it now, I still have 10 days to optionally return the phone.
Poco is not generous for headphone jack and glass back this time
damn, these cameras looks goofy af, why does it need so much space
Design. Why does the camera island on the F6pro and many other phones need to be so over sized?
I much prefer the minimalist Samsung 55 series design but companies want to look distinguished I guess.
@@DutchmanAmsterdam True, i like the look of Samsung but don't like it's pricing 🥲
Also tear down Realme gt6t
soon
Gas Helium
😊😊😊
Ok.
infinix gt 20 pro camera: Teardown
F6 pro please
Will try to do it as soon as I can get it
Nord ce 4 plezzz
soon
poor design removing heat. yeah they do it again. poco user will understand
how about poco f6 pro Sir?
soon
ASUS Zenfone 11
Teardown phone using sd 6 gen 1
Fragile Body🤬