SOOO was the dual 4090s worth it???😅 my goal of 2024 is to become more active on this channel and get more personal with you guys. Hope you enjoyed!💙 Update: Turns out it was my pc broke because that CPU was done for. I put it into another pc and after 10 minutes it froze up 😬 scary
It was not worth it. It has no upgrade in performance at all with no SLI. It's just a 3 thousand dollar decoration piece. Nevermind, you are using this for rendering. I still don't think it's worth it still though because the second 4090 is running slower due to the slower PCIE lane on the mobo.
The balancing on this isn't good, the second GPU runs slower, plus no sli, so unless your rendering in 2 different programs at once, or if your rendering and gaming at the same time. You should've just put more money into your CPU and/ or waited for a 4090 super, if that was released, I don't remember
PLUS... Cutting the case was a much better idea since it would become future proof for big GPUs. On the other hand, if you need to change it for any other GPU you will have to either cut ANOTHER GPU or just the case anyway.
Chalk it up to an emotional response. Let’s take into account how long he’ll be using this machine, by the time he moves on will be of minimum consequence…
money doesn't buy knowledge. You NEED to turn these bottom fans around. This configuration will blow air away from your gpu fans. Your gpu is fighting for it's life there. Turn the bottom and the top fans around so bottom is intake and top is exhaust.
This goof overheated his main m.2 by running an infamously hot 4090 on top of it, then supposedly "fixed" it by doubling down, adding a second infamously hot 4090 AND THEN choked both of them by making his bottom fans exhausts, after already unoptimising his airflow and temps by using an AIO as an intake. I would also have suggested supporting any 4090 with a bracket but especially two for the sake of the motherboard. Now you've got your M.2, both GPUs and your motherboard all fighting for their lives.
@@PenguinsAreColdish who's mad, hes pointing out baffling errors and choices that will 100% make his experience worse, while paying through the nose for them
@@profoundmatter4786 In 3 common sense steps 1. Engineer airflow from front and bottom to back and top (as heat rises and cold air will be blown onto the GPU) 2. Only run a single 4090 (SLI is unoptimised and widely unsupported.) way too much power draw, cost and thermal output for the gains of a single GPU. 3. If m.2 is overheating or throttling (probably the only reason it would randomly 'die' besides a shorting issue) looking into your airflow and/or invest your second pcie slot to a cool able m.2 expansion board.
"It invented a whole new category, Frames per minuite!" Me with a 1660 super at 4096 samples on cycles: "Those are rookie numbers, gotta get those numbers up"
Right i have. A 1650 ti and i am scared to death to even clean the case its scary ash and this man casually destroys a 2000 gpu that gpu is worth more than my whole setup😭😭😭@@plaaxys
@@maselitoamazigh1385 While without NVLink you won't get as much from a dual GPU setup as with it, you still get a significant performance increase in most use cases, where such a setup would make sense in the first place (Gaming is not one of them).
@@PomegranateJuiceSmoothie I mean outside of gaming, 3d rendering and running/training ML models, GPUs are not that useful. The latter two could make use of a dual 4090 (however, without SLI/NVLINK the lack of shared caching limits its usefulness in both scenarios). When compared to Nvidias workstation GPUs, a dual 4090 is pretty cheap. The lack of SLI in the 40 series is all that really justifies the workstation GPU pricing.
@@christoolshed7746 tbh pretty easy to push a 10k to the limit specially with Geographic Information Systems (GIS) or Ai training or 3d rendering like that case. Im using dual 3090s in SLI and is cheaper than a single A6000, and bro I aways wish I had money to have dual A6000 when I get out-of memory messages. So. professional workloads is no joke.
As an it guy the bottom 4090 at x4 sooooo it might be a bit bottle neck and under used … 😅 maybe change the motherboard to an x670e creator or any dual x8 so you’ll be able to use the 2nd 4090 at full power 😅😊
I don't think bus width is that big of a concern with GPU rendering, as once the scene is loaded in VRAM the GPU can does all the processing on its own without talking to system memory much. The only exception is if the scene exceeds the VRAM and pools over into system memory, which you'd avoid at all costs as it is orders of magnitude slower, and in some render engines less stable.
sorry you had to take out a loan for this one mate. i subbed and liked cuz ur content is amazing. UA-cam not paying ya'll anyways but we making it out the hood with this one
quick tip, your airflow configuration isn't optimal AT ALL and you're most likely leaving a lot of performance on the table becuase of it, easy fix tho Your top 3 fans mounted on your aio radiator are set to intake and your 3 bottom fans are set to exhaust, not optimal because the 3 bottom ones are pushing air out of your case right in front of the 3 fans of your second 4090, you should get the bottom 3 fans as intake so you get fresh air from underneath the case and it'll get fed directly to your bottom 4090. Your top 3 fans should be set as exhaust because right now they're getting fresh air in, which instantly passes through your aio rad and gets hot from it, so the air you're getting in is already hot. Hot air tends to rise up while cooler air tends to stick closer to the ground, same with a room halfway filled with smoke, the smoke sits closer to the ceiling than it does to the floor, so the best airflow setup would be intake at the bottom (just flip the fans) to get fresh air in, and exhaust at the top to get hot air out of the case. Your side fans are set up correctly but the top/bottom ones will cost you performance because all your components will run hotter. Hope this was helpfull, would be a shame to leave performance out in such an OP rig. Have a great day !
In the end it doesn't make much difference. Hot air / cold air does make a difference in a passive system, but even a small 120mm would completely remove that effect. Make sure you have more fans intaking than exhausting to maintain positive pressure, if you can get intake close to the GPU it's better, but you can have intake for your rad aswell. Without dividing up the airflow with a proper divider you won't do more than a couple of fps.
Honestly this whole dual 4090 set up is shit, High end GPU shouldn't even have air cooling after some point. A 4 slot card just doesn't make sense just pay an experienced builder a 100 bucks for some water cooling at that point
8:43 bro says literally like half the time, then instantly says 48% faster ..... Do you hear yourself? if you are taking half the time that means you are getting twice the speed so 100% faster doesn't it?
I love your main channel bro. You are an inspiration to me (I'm starting to learn Blender, and I'm both excited and frightened loll) But please upload more on this channel as well if you can. You are hilarious and really talented! Take care
This man right here,has dual 4090's AND I'M STUCK WITH A GODDAMN GT 710!!! But don't worry tho,i'll upgrade this year so it's gonna be also my last year with the 710.
I believe you can game on 2 4090's. You can set the 2nd one to do the PhysX (in the Nvidia Control Panel). It won't be double the performance, but it should still be a considerable uplift.
Ah yes, you had to either remove some metal part which does nothing and you probably can even replace it, from a $190 case or literally shave off the metal part from the $2300 GPU and you went for the second option, The most logical, analytical decision ever, besides building a dual 4090 PC, with a loan money too. This is too much of a human absurdity in the morning, just woke up minutes ago.
@@丷 'small loan' sounds pretty specific, therefore I dont think hes joking but regardless, thats why I said 'too' at the end - building a dual 4090 PC is not a smart decision in general, getting a loan for it would just make it worse.
@@META313. "took out a small loan of x" is a common joke 😭. he has 1m subs on his main youtube and 100m+ views which is at least 6-7 figures from just ad revenue, he doesnt need a loan whatsoever
Hey! I know this video is a bit older (I found it in my recommendations through your main channel), but I was really curious to see how much faster the dual 4090 is. Great video-I absolutely loved it! There is a slight error in the math, so I wanted to offer a quick correction. In your first test with Blender, the initial render time was 54.30 seconds, and the new render time was 33.8 seconds. I tried following the math to get to the 48% faster number you mentioned, along with the 1258%, but I couldn't quite make sense of it. Depending on how you interpret the numbers, the dual 4090 setup is either 60.6% faster or 1.606 times faster and comes with a 37.75% reduction in render time (which means the new render took 62.25% of the initial time). The math behind: 1. Times faster = Initial time / New time = 54.30 / 33.8 = 1.606 2. Percentage faster = (1.606 − 1) × 100 = 60.6% 3. Time reduction = (Initial time - New time) / Initial time × 100 = (54.3 - 33.8) / 54.3 * 100 = 37.75% (or it took 62.25% of the original time) I actually noticed this because I use similar calculations in my own work. I’m a full-time freelance video editor and learning programming on the side (still very much a newbie). I created an Excel sheet to track the performance of different versions of my scripts and compare them to tools like Handbrake, which helps me change video containers. That’s how I realized the percentage in your video might be off. Now for the second render time comparison, the initial was 21h 40min, and the new was 1h 43min. This means the dual 4090 setup is 12.62 times faster (or 1162.13% faster), with a 92.07% reduction in render time (meaning the new render took only 7.92% of the original time). You can get the same numbers by applying the math above. Just thought I’d share this in case others find the video like I did - keep up the great work!
you could easily sell that 4090 even with the missing bit because it looks so natural like it was meant to be missing that part i'm sure the buyer wouldn't even notice
SOOO was the dual 4090s worth it???😅
my goal of 2024 is to become more active on this channel and get more personal with you guys. Hope you enjoyed!💙
Update:
Turns out it was my pc broke because that CPU was done for. I put it into another pc and after 10 minutes it froze up 😬 scary
sell the other parts and trash out the cpu
It was not worth it. It has no upgrade in performance at all with no SLI. It's just a 3 thousand dollar decoration piece.
Nevermind, you are using this for rendering. I still don't think it's worth it still though because the second 4090 is running slower due to the slower PCIE lane on the mobo.
oh yeah make sure to go get sag brackets to stop the 4090s from sagging after a while especially the one on the bottom since it only has 2 slots
The balancing on this isn't good, the second GPU runs slower, plus no sli, so unless your rendering in 2 different programs at once, or if your rendering and gaming at the same time. You should've just put more money into your CPU and/ or waited for a 4090 super, if that was released, I don't remember
@@acceptablexy4805 yessir good catch! I did end up installing 2 brackets off cam. they some thick bois
Cutting small hole in a case that costs 240$ ❌
Cutting a piece of 2000$ gpu ✅
yooo bro got the opera gx swag!?
that cut was propably worth more than my life
😂😂😂made my day
PLUS... Cutting the case was a much better idea since it would become future proof for big GPUs. On the other hand, if you need to change it for any other GPU you will have to either cut ANOTHER GPU or just the case anyway.
Chalk it up to an emotional response. Let’s take into account how long he’ll be using this machine, by the time he moves on will be of minimum consequence…
bro turned a $200 fix into $7000
bro just needs a new mb lol
@@n64slayer yeah all he had to do was replace 1 part, could've been the ram
Content is content if your not doing some shi like black face. Remember tho, game is not game
@@rochester3 true
@Jetbigmoney2 hopefully its a business expense
The electric company gonna end up paying him to keep that thing off
89 degrees on a desktop: *THATS RUNNING TOO HOT!*
89 degrees on a laptop: *Wow! That running cool for once!*
Just turn off CPU boost and your temperatures will not cross above to 70 degrees
@@prakhardixit6491Is that on for default in most laptops? What’s the performance hit if you turn it off?
my laptop was cool cool it was 40 degrees before @jellocrackers9107
@@prakhardixit649189 is just bollow the the bear maximum
While gaming on my Acer nitro 5 i can easily reach 105 *C LOL
money doesn't buy knowledge. You NEED to turn these bottom fans around. This configuration will blow air away from your gpu fans. Your gpu is fighting for it's life there. Turn the bottom and the top fans around so bottom is intake and top is exhaust.
You're right money doesn't buy knowledge
we need to like this so he sees it
Yesss
So much this. Not only that, he's bringing hot air from the AIO inside the case, while competing with the GPUs for airflow direction.
but how? he doesn't have the space
0:19 bro made me think My potato was acting up too, gave me a heart attack
😂
BRO SAMEE LMAOO
Lol
Bro called me broke in 100 languages💀
Same bro 😂
Bro my pc costs 800 bucks 😂
Nah bro did it with 7,139 languages 💀
@@Bartu-h3fmine is 2k
He literally said he took a loan for the like $4k lol.
akimbo 4090's goes HARD!🔥
little bro when are you gonna upload
Fr we need content and u need money lol upload I’ll take a video of u like sitting on the toilet playing anything lol upload
Omg I remember you talked about 12th hour in the faze rc video 😎
E
Part 2
ua-cam.com/video/4XjBoMd3BVE/v-deo.html
Bro just invented the new rtx 8180
More like a 5000 series, they roughtly double every gen, but no, wont work in games.
@@engjdsthey never double 😭
@@Tronexx 30% then, but arguing over 20% is just petty).
@@Tronexx Rtx4090 is 80% better than 3090 so he is pretty close
@@Kiiiurself8482 4090 jus built different but the 3060 and 4060 were relative and 4060 arguably worse
bro spent $7,221.51 to get 30 seconds better in blender...
30 seconds pretty slow thoo
@@Diamondsword85_RS lol 30 seconds is 30 seconds
yes but 30 seconds is also like 3 hours
For one frame, if you need to render 1000 frames it does count....
@@ITacoI9972 every 60 seconds in Africa a minute passes!
This goof overheated his main m.2 by running an infamously hot 4090 on top of it, then supposedly "fixed" it by doubling down, adding a second infamously hot 4090 AND THEN choked both of them by making his bottom fans exhausts, after already unoptimising his airflow and temps by using an AIO as an intake.
I would also have suggested supporting any 4090 with a bracket but especially two for the sake of the motherboard. Now you've got your M.2, both GPUs and your motherboard all fighting for their lives.
what are you so mad for
@@PenguinsAreColdish who's mad, hes pointing out baffling errors and choices that will 100% make his experience worse, while paying through the nose for them
He took out a loan to pay for this PC of course he doesn't know wtf he's doing.
Now provide your solution
@@profoundmatter4786
In 3 common sense steps
1. Engineer airflow from front and bottom to back and top (as heat rises and cold air will be blown onto the GPU)
2. Only run a single 4090 (SLI is unoptimised and widely unsupported.) way too much power draw, cost and thermal output for the gains of a single GPU.
3. If m.2 is overheating or throttling (probably the only reason it would randomly 'die' besides a shorting issue) looking into your airflow and/or invest your second pcie slot to a cool able m.2 expansion board.
Sheeesh finally someone who talks about GPUs for something other than video games
"It invented a whole new category, Frames per minuite!"
Me with a 1660 super at 4096 samples on cycles: "Those are rookie numbers, gotta get those numbers up"
You be running FPD
Frames per day
Really I'm running frames per month or maybe even frams per year(intel uhd 620)
br my ass is on a gtx 750 im on frames per week
dawg i use a school laptop im on frames per month🗿🗿
@@Acpondy ayyy let's go
can i get your broken PC, cuz i dont have one
lol
Give this man the pc
Ngl just save up for one
broken pc literally doesn’t post, won’t do you any good since it doesn’t do him nothing
@@S6ltyyK1dd exactly
Bro cut into his $2000 RTX 4090 instead of the $190 case.
yeah he is really retarded
btw you should probably flip the fans on the bottom and top so you can have actual airflow
u right
Yes
Yes Sir, intake on the bottom not exhaust
@@shaundasheepmurphy1589those are reverse blades…
@@Microsoft_Flight_Simulator No they are not. You can see it at 7:53
CAUTION:- "DONT WATCH IF U HAVE INTEGRATED GRAPHICS!!!!"
imagine having no gpu in 2024
@@WTFire777 fr you tell em mr Fire
@@WTFire777 tf they supposed to do, go back in time
That made 0 sense 😂@@FentanylMonkey
@@WTFire777 exactly
the clarity and quality of your videos are always top-notch!
let me think? destroy a 2000+ gpu? or destroy a 100$ case? lets destroy the 2000$ gpu:)
i cant even touch my gtx 1060 without the fear that its gonna break
Right i have. A 1650 ti and i am scared to death to even clean the case its scary ash and this man casually destroys a 2000 gpu that gpu is worth more than my whole setup😭😭😭@@plaaxys
youre not destroying it lol youre just voiding a warranty.
@@boston9817and killing resell value.....
@@boston9817 you're voiding the warranty and resale value
Bro didn’t build a pc, he built a refrigerator
Cutting through a case that costs $300❌
Cutting through a GPU that costs $2500✔️
Nice video dude, I actually thought you should have 500k subs, keep going bro, this quality of work, you’ll make it
4:59 this cracked me up😂 like some wacky cartoon character
Ayo, the fact you added your logo animation for the water cooler display is tight AF! 💪
AYE thanks Xtra!
Done the same with mine. Created a whole ass new animation in AE and it's so cold
Normally dual 4090 is way too ridiculous but you actually need them...
it doesnt supports sli so its useless to have 2
@@maselitoamazigh1385 While without NVLink you won't get as much from a dual GPU setup as with it, you still get a significant performance increase in most use cases, where such a setup would make sense in the first place (Gaming is not one of them).
@@lyxsm i cant think of any scenatio it would increase performance other than training and running AI models
@@PomegranateJuiceSmoothie I mean outside of gaming, 3d rendering and running/training ML models, GPUs are not that useful. The latter two could make use of a dual 4090 (however, without SLI/NVLINK the lack of shared caching limits its usefulness in both scenarios).
When compared to Nvidias workstation GPUs, a dual 4090 is pretty cheap. The lack of SLI in the 40 series is all that really justifies the workstation GPU pricing.
1:12 I’ve been without a pc for more than a decade so 💀 ☠️☠️☠️☠️☠️☠️☠️
Im getting one tommorow
Hell, I didn't know you could build a workstation for less than $10,000 that was actually worth using.
doubt you do anything that actually pushes a 10k workstation
sounds like a blessing tbh@@christoolshed7746
@@christoolshed7746 Neural netwrok training will crush a 10k workstation
@@christoolshed7746 You can barely do video editing efficiently as most of your money will be spent on memory.
@@christoolshed7746 tbh pretty easy to push a 10k to the limit specially with Geographic Information Systems (GIS) or Ai training or 3d rendering like that case. Im using dual 3090s in SLI and is cheaper than a single A6000, and bro I aways wish I had money to have dual A6000 when I get out-of memory messages.
So. professional workloads is no joke.
Excited to see how you use this new setup for your content! Also, the animated logo on the pc looks SICK
DAD I WANT THAT PC FOR MY SCHOOL ONLINE ZOOM MEETING 🤡
bro kooked so hard on the aesthetics its actually crazy
''yes mom i need this for powerpoint''
your gpu is 4X more expensive than my whole pc 😭
That ultra-wide 4090 got the Sawed-off Shotgun treatment.
As an it guy the bottom 4090 at x4 sooooo it might be a bit bottle neck and under used … 😅 maybe change the motherboard to an x670e creator or any dual x8 so you’ll be able to use the 2nd 4090 at full power 😅😊
There's those motherboards :
MPG X670E CARBON WIFI
MEG X670E ACE
MEG X670E GODLIKE
X670E Taichi
Proart X670E Creator
getting a budget gaming motherboard for a dual 4090 workstation is truly a waste...
@@wpdlatm5576 sometimes people aren't PC enthousiaste so it's important to teach them 🤷♂️😇
ignorance is bliss shhh
I don't think bus width is that big of a concern with GPU rendering, as once the scene is loaded in VRAM the GPU can does all the processing on its own without talking to system memory much. The only exception is if the scene exceeds the VRAM and pools over into system memory, which you'd avoid at all costs as it is orders of magnitude slower, and in some render engines less stable.
Bro that was one of the most beautiful video creation concepts I have ever seen. Thank you
sorry you had to take out a loan for this one mate. i subbed and liked cuz ur content is amazing. UA-cam not paying ya'll anyways but we making it out the hood with this one
Should've applied for NVidia's new life insurance programme.
the clarity you bring to your subjects is beyond impressive!
your energy and enthusiasm make every video a joy to watch!
Flip your top fans and use it as exhaust, then the bottom fans for intake.
Another dude with money with no clue..
can't wait for what you cook with this!
bro that part at the 23 second mark had me thinking my pc was about to explode. I was shitting my pants ong
That fan orientation tho, just proves that with unlimited amount of money you cant buy knowledge on how to build a pc the right way😂
quick tip, your airflow configuration isn't optimal AT ALL and you're most likely leaving a lot of performance on the table becuase of it, easy fix tho
Your top 3 fans mounted on your aio radiator are set to intake and your 3 bottom fans are set to exhaust, not optimal because the 3 bottom ones are pushing air out of your case right in front of the 3 fans of your second 4090, you should get the bottom 3 fans as intake so you get fresh air from underneath the case and it'll get fed directly to your bottom 4090.
Your top 3 fans should be set as exhaust because right now they're getting fresh air in, which instantly passes through your aio rad and gets hot from it, so the air you're getting in is already hot.
Hot air tends to rise up while cooler air tends to stick closer to the ground, same with a room halfway filled with smoke, the smoke sits closer to the ceiling than it does to the floor, so the best airflow setup would be intake at the bottom (just flip the fans) to get fresh air in, and exhaust at the top to get hot air out of the case. Your side fans are set up correctly but the top/bottom ones will cost you performance because all your components will run hotter. Hope this was helpfull, would be a shame to leave performance out in such an OP rig. Have a great day !
Thanks for the advice! I've actually gotten a few comments mentioning this. I'm gonna fix it!
In the end it doesn't make much difference. Hot air / cold air does make a difference in a passive system, but even a small 120mm would completely remove that effect. Make sure you have more fans intaking than exhausting to maintain positive pressure, if you can get intake close to the GPU it's better, but you can have intake for your rad aswell. Without dividing up the airflow with a proper divider you won't do more than a couple of fps.
just rip the walls off and stick the pc on your ac vent. W cooling.@@Ryan12th
@@oskarwallin8715 with how much he's spendng taking 10-20 mins to swap the direction of the fans is probably worthwhile
Honestly this whole dual 4090 set up is shit, High end GPU shouldn't even have air cooling after some point. A 4 slot card just doesn't make sense just pay an experienced builder a 100 bucks for some water cooling at that point
8:43 bro says literally like half the time, then instantly says 48% faster ..... Do you hear yourself? if you are taking half the time that means you are getting twice the speed so 100% faster doesn't it?
You really think this fucking dork hears himself or thinks ever? Yeeeeaaahhhh right.
That's what I was thinking he proly meant that it took 48% less time to produce the frame and somehow got confused and said faster
Glad to finally see 4090s being used for what they were meant to - work not 1080p gaming.
7 grand for a pc and his phone case is yellow 💀
I mean he spent every penny he had on his GPU
@@Dawird TWICE
priorities, yo.
What country is that on pfp
@@sethf. Palestine
your video is insane, keep going bro
Triple 4090 when?
Ikr
never cuz we all broke 💀
I love your main channel bro. You are an inspiration to me (I'm starting to learn Blender, and I'm both excited and frightened loll)
But please upload more on this channel as well if you can. You are hilarious and really talented! Take care
yooo thanks so much bro! Best of luck with the blender adventures! It's so much fun
Man was confident booting that with the case closed. Respect
the voice over meme at 7:17 was the most accurate thing in this video😭 shi looks so magnificent!!!
You should have cut the $200 case instead of the $2000 graphics card
bro this dude is so damn funny. these videos are always way too good bruh
Never knew bro knows alot about PC builds, you killed it with those dual 4090s 🔥🙏
Oh he does not, I was suspecting the same thing someone else pointed out above, the new 4090 is underutilized just cause of the wrong motherboard
@@ADB-_ shhhhhhhh
bro your face at this moment is telling everything inside you 5:00
This one of the best videos I've ever seen just great editing
I actually loved this video 12th. Keep it up my guy❤️
This man right here,has dual 4090's
AND I'M STUCK WITH A GODDAMN GT 710!!!
But don't worry tho,i'll upgrade this year so it's gonna be also my last year with the 710.
are you upgrading to dual 4090s?
@@andrei769 he upgrades to triple 4090s
@@andrei769 My man,do you think i'm that rich lmao?
GT 710 is like a free GPU~
there is a solid chance that rtx 5090 is released in november/december
Wow thanks for the budget pc man!
3:14 rip bank account
Just give him 1 dollar
@@babakhouman nah
I believe you can game on 2 4090's. You can set the 2nd one to do the PhysX (in the Nvidia Control Panel). It won't be double the performance, but it should still be a considerable uplift.
God it’s so nice man😭good for you bruh
Awesome build! I have the same case and it's tricky to fit all the cables in there. Lian Li fans can run 3 fans on 1 cable which is really helpful!
I hope you are planning to try large language model on this computer. Because 48GB of vram allow to run pretty smart AI model.
I don't know the first thing about that, but that would be awesome!
Lm studio, run your own personal LLM (chatgpt) but without any guardrails.
The animated logo on the cooler screen looks amazing!!!
1:19 was that really that necessary😭😭
Yes, yes it was
watching him do that literally hurt my soul and its not even my build
@@joelcastro4671I know same bro
Ah yes, you had to either remove some metal part which does nothing and you probably can even replace it, from a $190 case or literally shave off the metal part from the $2300 GPU and you went for the second option,
The most logical, analytical decision ever, besides building a dual 4090 PC, with a loan money too. This is too much of a human absurdity in the morning, just woke up minutes ago.
And the part had screws to undo it also.
@@ShinigamiLilithyeah, thats why I said 'remove', instead of 'break', 'bend', etc.
I cant even comprehend how flawed his thought process is.
it wasn't actually loan money 😭his main youtube has 1m+ subs, hes def rich af
@@丷 'small loan' sounds pretty specific, therefore I dont think hes joking but regardless, thats why I said 'too' at the end - building a dual 4090 PC is not a smart decision in general, getting a loan for it would just make it worse.
@@META313. "took out a small loan of x" is a common joke 😭. he has 1m subs on his main youtube and 100m+ views which is at least 6-7 figures from just ad revenue, he doesnt need a loan whatsoever
Bruh! Grinding those GPU gave me Goosebumps!!! 💔💔
you should change the fan orientations so it pulls in from the bottom and out the top (because heat rises)
Now its an rtx 8180 😂
I've subscribed to find out how you're planning on powering this with solar for your van build! Hopefully videos on this soon 🎉
no threadripper??'
He gets every other overkill part except the threadripper. Disappointing
0:40 Sounds like a CPU/RAM issue
Ya he shoulda just replaced that
yeah nah it ain’t paying for itself
1:23 bro 20 days is nothin try your whole life😭
I haven’t had a pc since 2022 ☠️
AND it was a crappy HP laptop that could barely run UA-cam videos
But can it run crysis?
I appreciated that C&C Tesla coil sound effect @1:43
ryzen 7 7800x3d was a beter choice
Nope it’s not used primarily for gaming
so like why did you buy such a cheap motherboard ? AND WHY THE HELL DID U GET THE MOST EXPENSIVE SSDS. bro like at least get lian li fans bruhhhhh
you call x670e cheap ?
ima just subscribe and like every video of this guy! ifukuk! 🤧
9:00 Does anyone know where this edit is from?
Hey! I know this video is a bit older (I found it in my recommendations through your main channel), but I was really curious to see how much faster the dual 4090 is. Great video-I absolutely loved it!
There is a slight error in the math, so I wanted to offer a quick correction. In your first test with Blender, the initial render time was 54.30 seconds, and the new render time was 33.8 seconds. I tried following the math to get to the 48% faster number you mentioned, along with the 1258%, but I couldn't quite make sense of it. Depending on how you interpret the numbers, the dual 4090 setup is either 60.6% faster or 1.606 times faster and comes with a 37.75% reduction in render time (which means the new render took 62.25% of the initial time).
The math behind:
1. Times faster = Initial time / New time = 54.30 / 33.8 = 1.606
2. Percentage faster = (1.606 − 1) × 100 = 60.6%
3. Time reduction = (Initial time - New time) / Initial time × 100 = (54.3 - 33.8) / 54.3 * 100 = 37.75% (or it took 62.25% of the original time)
I actually noticed this because I use similar calculations in my own work. I’m a full-time freelance video editor and learning programming on the side (still very much a newbie). I created an Excel sheet to track the performance of different versions of my scripts and compare them to tools like Handbrake, which helps me change video containers. That’s how I realized the percentage in your video might be off.
Now for the second render time comparison, the initial was 21h 40min, and the new was 1h 43min. This means the dual 4090 setup is 12.62 times faster (or 1162.13% faster), with a 92.07% reduction in render time (meaning the new render took only 7.92% of the original time). You can get the same numbers by applying the math above.
Just thought I’d share this in case others find the video like I did - keep up the great work!
LMAO cutscenes and commentary are great.
Dream prices to build a dream PC. Here in Brazil, with 7k dollars you wouldn't be able to buy even two RTX4090s. You're a lucky guy bro...
The memes used are absolutely top teir. Respec
Happened to me and just took my ram sticks off, rub them pencil erasers at them contact pins, blow on it, put them back and fix it 😂 lol!
Most are dreaming of 1x4090 you dreamed much bigger and made it a reality
1:15 travis fan spoted
TWOOOO 4090 IS WILD BRO -slide one-... BROS RICH
i pressed f to pay respects and went in fullscreen now im fully into the video
This is golden, great job
everytime he even TOUCHED the 4090's the wrong way, i had a heart attack.. and he even pushed it off once
this is crazy good for your third video
The electricity bill is expensive than dual 4090😅
can’t wait to see you upgrade to dual 5090s soon™
U should have sent it to the greatest technician that ever lived
you could easily sell that 4090 even with the missing bit because it looks so natural like it was meant to be missing that part i'm sure the buyer wouldn't even notice
Dremel on the 4090 is insane braaaa. Literally doing the process of replacing mine rn through warranty
nah dual 4090s is crazy 💀 nice build bro