Where can I buy the chart that you have with all the parts on it for repairing the lighter.do you have a link to where I can buy one or do you sell them.. where is the best place to buy them an do you have a link for where to buy the tools you need for repairing them such as tool for taking out fuel valve an for taking off part where flame comes out of it.thanks in advance..
I've repaired a Ronson Varaflame. Old flint had gone hard to drilled it out like in your video. Put it back together, the flint wheel runs nice and free but when I put a flint in the wheel won't turn to get a spark......any ideas
If you all mean that you have verified the flint tube is now free enough for the flint to get to the wheel, and that the wheel seems to turn reliably when there is NOT a flint inserted, but that when you put a flint in and reinsert the spring - THEN it feels "stuck?" Possibly the spring has too much force - I'm not sure why, but over time or use, a flint spring may expand or contract so as to not apply the proper pressure. Too little of pressure (a contracted spring), and the flint will barely spark. Too much pressure (an expanded spring), and the wheel won't have enough force to scrape off the flint. What I have done in these cases is either to try to adjust the spring by hand (in your cases, trying to "smush" the spring together - which is admittedly more difficult than the opposite). So if that doesn't work, and you're not afraid to do so, you can clip a couple rings off the spring on one end and reattach it. But of course you'll be altering the original product in that case. ;) Hope this helps!
@@IMDWT thanks for your advice. The old flint had been in the lighter for about 40years and it was solid in the flint tube and it had also welded itself to the flint wheel. I managed to free the flint wheel and then drilled out the old flint but unfortunately I think I drilled it out slightly larger than it should be and the flint passed through the hole quite easily when I assume it should be a nice snug fit in the tube where it makes contact with the wheel. I don’t think the problem can be rectified and its no longer usable so it’s sadly only for display
Could you direct me to how to repair the valve where the flame comes out that does not have a pin, my lighter doesn't have a pin yet it is a Ronson Varaflame and I would love to be able to use it.
thank you for this video. this was the only thing I found that had a detailed view of how these lighters are reassembled including a washer!
You're welcome
Hi thanks for your video how can I buy kit for repair
Thanks ! I didn't find what were the utility of a little part of my Sarome Blue bird and it was here !
Thank you very much! My Ronson Varaflame is alive and kicking again! :)
Where can I buy the chart that you have with all the parts on it for repairing the lighter.do you have a link to where I can buy one or do you sell them.. where is the best place to buy them an do you have a link for where to buy the tools you need for repairing them such as tool for taking out fuel valve an for taking off part where flame comes out of it.thanks in advance..
HI, I can’t seem to release the end where you add the lighter fluid, any suggestions at all?
Press it with your finger and then just pull it harder
I've repaired a Ronson Varaflame. Old flint had gone hard to drilled it out like in your video. Put it back together, the flint wheel runs nice and free but when I put a flint in the wheel won't turn to get a spark......any ideas
I have the same problem, did you find a solution yourself or are you still stuck?
@@nikolai162 I have the same issue and I came here for answers...
If you all mean that you have verified the flint tube is now free enough for the flint to get to the wheel, and that the wheel seems to turn reliably when there is NOT a flint inserted, but that when you put a flint in and reinsert the spring - THEN it feels "stuck?"
Possibly the spring has too much force - I'm not sure why, but over time or use, a flint spring may expand or contract so as to not apply the proper pressure. Too little of pressure (a contracted spring), and the flint will barely spark. Too much pressure (an expanded spring), and the wheel won't have enough force to scrape off the flint. What I have done in these cases is either to try to adjust the spring by hand (in your cases, trying to "smush" the spring together - which is admittedly more difficult than the opposite). So if that doesn't work, and you're not afraid to do so, you can clip a couple rings off the spring on one end and reattach it. But of course you'll be altering the original product in that case. ;)
Hope this helps!
@@IMDWT thanks for your advice. The old flint had been in the lighter for about 40years and it was solid in the flint tube and it had also welded itself to the flint wheel. I managed to free the flint wheel and then drilled out the old flint but unfortunately I think I drilled it out slightly larger than it should be and the flint passed through the hole quite easily when I assume it should be a nice snug fit in the tube where it makes contact with the wheel. I don’t think the problem can be rectified and its no longer usable so it’s sadly only for display
Thanks mate 💪👍
Thanks you!! 👍👍👍
If my lighter dosent have the spring how do i take the part off at 1:21
How do I order the R1-B kit from you
I just checked the ebay link. Is it possible to deliver to Mexico?
Can you tell me how to refill this lighter? I just got one from my grandpa and cannot figure out how to fill it. Thanks
Just look at 8:30 and up , you can see how to refill it.
hey are you still selling the repair kits?
I have a Ronson Varaflame that needs to be filxed, please hit me up if you repair lighters.
Big valve cap is stuck closed, it will turn but it wont pop out to open, any tips?
Use finger pressure to turn out the valve
Thank u so much for making this
Hello! Sorry, where can I get such parts for lighter???
www.ebay.com/itm/Ronson-1960-1980th-Vintage-Gas-Lighter-repair-Kit-R2-b-Free-UA-cam-DIY-Video-5/123429143673?hash=item1cbcf34479:g:TukAAOSwezVW02j3
有新的連結嗎？這個用不到了
Where do you buy the kit from.
so the information that i was searching for which was the flint removal happens to be the only part you skipped
Where can i order the spare part? The link only given types right?
www.ebay.com/itm/Ronson-1960-1980th-Vintage-Gas-Lighter-repair-Kit-R2-b-Free-UA-cam-DIY-Video-5/123429143673?hash=item1cbcf34479:g:TukAAOSwezVW02j3
Could you direct me to how to repair the valve where the flame comes out that does not have a pin, my lighter doesn't have a pin yet it is a Ronson Varaflame and I would love to be able to use it.
Just pull it out that's what I did on mine
Bonjour j’ai un briquet comment je peux remplir la gaz
Merhabalar, parçaları nasıl tedarik ettiniz acaba?
Welcome.Can you do me a favor.ld like this Carton Of Ronson Lighter replacement parts, please.Thankyou.
Saludos..donde vonsigo el kit de reparacion valvulas orrines para ronson..
www.ebay.com/itm/Ronson-1960-1980th-Vintage-Gas-Lighter-repair-Kit-R2-b-Free-UA-cam-DIY-Video-5/123429143673
very good
請問這款還有在修理嗎
Can anyone tell me where I can get gas for Colibrei lighters with skew in thread
Do you sell your lighter or do you just collect them?
collect them
يوجد لدي قداحة رونسون قديمة كيف اعرف عمرها وثمنها وشكرا جزيلا
Sorry...can't help
i got 2 pcs like this .
Where can I order these parts?
www.ebay.com/itm/121908861494?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
kisiera saber en qué año fue echo
English, please
可以給我一個新的連結嗎？
ola tengo un encendedor rronson bonito antiguo
I have a piece
6
عندي واحده للبيع
الاردن نفس يلي في الفيديو
@@شاهرالصوص-ص6د جارك درعا حوران شو سعرها. البلد على الاوتستراد الدولي عطيني رقمك وسعر الولاعة. وتساب
Might wanna proof read your English a bit