Це відео не доступне.
Перепрошуємо.
Sharpening Wood Turning Tools On A Low Budget
Вставка
- Опубліковано 19 лис 2021
- Please consider subscribing!!
If you would like to support my channel you can by: paypal.me/wood...
...
If you would like to visit my Etsy shop it is @ www.etsy.com/s....
If you would like to send me your logo sticker or If you want me to wear your t-shirt in one of my video's I wear a Large (USA) please send to: woodworking220-7 PO BOX 745 Kenilworth NJ 07033
Wood turning and woodworking. Sharing and learning from the UA-cam community. Enjoying my time in the shop and showing some of my projects. Hope you enjoy my videos! As always thank you all! Started this channel to share with my family and friends, and I am humbled by the continued support and subscribers I receive. THANK YOU!!
Please Check out ackswoodpaste....
Use promo code Luie10 to receive 10% off your order.
Finally a video of someone that didnt just win the lotto and buy all of the fancy turning tools. Just starting out this is awesome. Well done!
Thank you so much! I hope it helped 👍
This is exactly what I was looking for. I am on a fixed budget & cannot afford expensive tools. Thank you
@@chrispark3758 so glad that it was able to help you👍
This is freaking brilliant. THANK YOU.
Thank you so much 😊
Good job, Luie! There are always more than one way to get something done. I love your ingenuity! I've done similar in my 50 years of woodworking and it's always very satisfying to solve a problem with little cash outlay. I'm sure this video will help a lot of people. 😊
Phil
Thanks Phil,
We do what we can with what we have😊👍😎
Great job of using what is available on hand. Keep up the great work Louie.
Thank you so much 😊
Good job Luie! Yeah, i dont have several hundred in my budget for a fancy setup either. As long as something works, it dont have to be expensive!
Thanks for stopping by and commenting on this video I appreciate you 👍😊
A very convenient device for sharpening!
Thank you so much on a budget, you have to do what you can
Great info, Luie. I got the one way system as a gift and it just made me realize you don’t need to spend a lot of money on fancy stuff. Consistency is the key and you have that covered. 👍🏻
Thank you so much buddy 👍😊
Love the fact you made your own sharpening tool rest. I am big on up cycling. Very informative. Thanks for sharing 😊
Thank you…..for watching and commenting 👍😊😎
Thank you, Luie. Take care.
Thank you so much 😊
What a great idea! Thanks!
Thanks! when your broke you find a way
Well thought out ,luv it and thanks for sharing this idea
@@prem9918 thank you!
Thank you Luie. I was hoping you would make this video. I to work with a small budget at times. Hopefully I will have a fancy sharpening station some time in the future, but will make do in the meantime.
You are welcome I hope this helps 👍😊
I thought to myself, "I don't remember subbing to "Spindles workshop"" but it's Luie! Cool stuff.
Thanks, hope the name change doesn’t affect my rating 👍😊
@@spindlesworkshop9744 international man of mystery the breaker of chains the lord of the wood shop the po hammer the guitar looper the spindles handler the friend of friends the beloved father he is called by many names across many realmed platforms
@@mammsiegraham the mystery the man the legend 😎🤪😂
@@spindlesworkshop9744 I shoulda put the spindler of spindles lol 😂
@@mammsiegraham 🤪😂
I was worried I wouldn't be able to sharpen my tools. This is brilliant! Now I can get hss tools and not be intimidated by them. Thank you.
Thank you! So glad it helped
Great idea Luie
thanks
Very cool Luie!
Thank you so much 😊
Great video Luie! Free is my favorite price to pay. I'm currently using a harbor freight 4 x 36 belt sander as my lathe sharpening system. It's my poor man's ProEdge. 😃
Greatest comes from necessity 🤣
Thanks for commenting 👍
I like that you made what it takes to do the job. And it seems to do a fine job. It seems half of my fun in the shop is to make jigs and things to help in the process.
I recognized the logo but did a double take on the new channel name.
Thanks for making this video I know it will help a lot of people that just are not sure what is needed for setting up a grinding station.
Gary
Thanks Gary,
I changed the name to match my Etsy shop.
Hopefully it doesn’t affect my rating on UA-cam
Very well done vid there Spindles👍😁 One thing to be careful of is getting the tool too low on the wheel where it can get jammed and cause serious problems. I get leery when the cutting edge goes below 45° (7-8 minutes on a clock). It's a combo of the tool length, the cutting angle, the wheel diameter, and how hard you push down. Keep 'em coming Luie👍 Take care. -Mike
Yes your right
You can not go below that quarter of the wheel👍💪😎
I bought an 1890s watchmakers lathe to make viola pegs and your video is the first one I've seen about lathe tool sharpening. Straight forward, honest explanation of how to get at a perfect edge on my similar budget. I've paid $700 for viola fittings from artisans in Europe and finally thought why not just make them. Problem is, the lathe brought $700 on eBay 😃. I will get one of those Mohawk wheels. Thanks for your help 🍻.
So glad this was helpful
I have upgraded since I put out this video
Thank you so much for your support and kind words 👍😎
Luie!! How have I only just realised that you changed the name of your channel! It all makes sense now - I am playing catch up here! Ha! Sharpening is one thing that has so far kept me from trying or buying traditional tools! It was great to see what is possible - still don't feel brave enough to try just yet. Thanks for sharing. Claire x
Claire,
I just changed the name to match my Etsy shop. I plan on mentioning it in my next video.
Thank you so much for stopping by and commenting 👍😎
Nice job Louie, and it goes to show that we don't have to spend hard earned money to make something cheaply instead of buying an expensive factory made jobby that does exactly the same thing.
Cheers, Bram .Ps nearly had me there with the name change lol
Thanks buddy 👍
I changed the name to match my Etsy shop. Hope it doesn’t affect my rating 🤔
@@spindlesworkshop9744 i would not have thought so mate
I don’t got no woodworking tools 🛠 but I know a low budget 💪lue dawg always giving back feeding the community thank you for the service bro help others helps ourselves
Thanks brother 👍😊
I can always count on your support man, I appreciate you 😎💪👍✌️
Good info. I see you have done a channel name change. Good to have the channel name match the Etsy shop name. 👍🏻
Thanks 👍
Yeah I will mention the name change in my next video, I hope it doesn’t affect my rating 👍😎
@@spindlesworkshop9744 Old name very distinctive and unusual. New name more generic, but still good identifier. Will the Brit guys now start calling you “Spindles” when they don’t remember what first name goes with the channel name? 🤣🤣🤣
@@valeriehenschel1590 🤔🤪🤣I have been called a lot worse
I think we all work within our budgets. I started about the same and funding was a available for me to expand to nicer tools. Looking back... I spent too much. LOL
My day is coming 👍😁
Terimakasih banyak atas ilmunya
Thanks
Man what an awesome setup. Really looking forward to setting this up in my shop now. I find that I end up making more jigs and stuff like this than actual projects, but it's exactly what will be needed to restore my grandpa's old lathe tools. Thanks for posting this.
I will add a small disclaimer for anyone that using a fine grinding wheel will make the tool heat up faster than a course wheel. Might be prudent to have a little jar of water nearby to keep your steel from overheating and losing temper (so I've heard anyway.)
Hello,
Thanks for your support 👍
If you are regrinding the angle I agree you can’t let the steel heat up.
But if you are just putting an edge on it you should be fine (hope that makes sense)
Excellent advice for people on a low budget & just starting out woodturning 👍
Thank you! I appreciate you watching
Well done. You seem to be a humble plain talk guy with good knowledge and talent. I'm just starting off with lathe work and have learned how quickly the tools dull down, following your lead and will copy your setup. Thank you.
Thank you for the kind words!
I appreciate that and hope you check out some of my other videos.
I plan on starting up new videos in the new year.
Thanks again
Nice to see imagination at work..., thanks
Do with what we have 😊👍
This is precisely what i was looking for, thanks!
Thank you for your support and kind words 👍😎
This is why I love watching your videos so much Luie. The solutions with a low or even no budget. After all, we can only spend our money once. Good solution and good tips. (New channel name, I was a bit confused for a moment 😊)
👍Frank
Thank you so much 😊
I changed the name to match my Etsy shop 👍
Thanks for this! so many videos have all the expensive gear and not everyone has the budget especially when starting out..All the best.
Thanks!
Thanks for this, just what I was looking for, made a jig today and it works!
That’s awesome!
This video came with perfect timing for me. I have been using carbide tools exclusively because of the cost of sharpening tools on the market. I will be setting one like yours up very soon. I also sent you a sticker today. Keep it up and be safe.
That’s great I’m glad it helped you out😊👍
and I look forward to receiving your logo!
Thank you. It has certainly helped me. Also on a budget.
Thank you for your kind words👍
I’m glad you were able to get something out of it 😎
Thank you for making this video, I’ve been searching all week!
I’m trying to get into turning, with a cheap used Harbor Freight lathe but didn’t want to spend another pile of money trying to keep things sharp.
I’m so glad you were able to get something out of this
I appreciate your comment 👍
Nice setup in your shop. Thanks for showing us. Take care.
Thanks 😊 I appreciate you stopping by and commenting 👍
Thank you . Good and cheap ideas , good for me !!
Thank you!
You watching and commenting is appreciated 👍
Great Jig. Has the same rulles as the expensive set ups. I would watch for heat and have some water close by. A slow speed grinder would help. Look for a secondhand DC motor from a tread mill. A cheap speed controler from the net and you have it all together.
Thanks for the tips!
a very practical video really helpfull for gouge sharpening
Thank you for your support and kind words 😎👍
Bravo Brother 💯🇺🇸
Very ingenious!!! Looks like it works like a champ
Thank you so much 😊
We do with what we have 👍
Cool.
Thanks Tommy
@@spindlesworkshop9744 Thank-you i used to do a lot of work working years ago.
Brilliant, thanks😊
Thank you 👍
Great idea Luie Keep up the great work Louie.
Thank you so much 😊
Thanks. Great advice
Thanks I hope it helps 👍👍
Brilliant Luie! 😎
Wow! Thanks 😊 necessity creates
G'Day Luie. That is so neat. I'm going to have to try set up my own. :) Rob
Thank you so much
Let us know if it works out for you 👍✌️
Thanks great for beginners like me😅
Thank you! For stopping by and commenting 👍😎
Just found your vid, well worth the price of a subscription! gonna check out your library in a bit, thanks
Yes the subscription price is a bit high🤣
Thank you so much for your support 👍
Great vid! Thank you for sharing. I like what yer doin' Man. This really helps me. ja
Thank you so much for your support and kind words
Glad you were able to get some thoughts out of it👍
Great idea. I love to see people use their imagination to solve problems on a budget. I was recently given a lathe and have been practicing but sharpening has been my issue. Thanks for the solution. I was thinking about using my drill press and a homemade jig as a low speed grinder. What do you think?
I’m not sure what you’re thinking
But I’m sure you can figure it out if you put your mind to it 👍👍
Great video Luie! Cool new channel name Brother 👍
Thank you so much 😊
I need to design a new opening
Thank you for sharing your way brother.
You’re welcome
Thank you so much for watching 👍😊
Neat
Thanks!
You changed your channel name. Threw me off for a minute. Good thinking for your sharpening.
Congrats on winning Gary’s bowl !
I am giving you a shout out hopefully I will have the video ready by tomorrow
@@spindlesworkshop9744 thanks. I’ve been thing about trying to imitate that bowl. May still but I’ll have the original as well.
So love your video! my friend!!!~Thanks for sharing!!~~~😀😀😀😀
Thank you so much 😊
Phil Anderson recommended your channel. I love budget solutions. Great job on this video.👍👍
Thank you for coming over!!
I really appreciate that!!
Phil is a great guy!👍
That was great. I need one. Do you have plans or sketches?
No I don’t sorry I kind of winged it.
And have upgraded since this video
So I cannot even give you measurements
So sorry
Thank you for your comment 👍
Looks pretty hard for a beginner. I probably would need plans of how to make.
You can do it just take your time and think about what you need 👍
Thanks for your support and comment
Thanks for your tips brother ✊🏽
Thank you!
Glad it helped👍😎
I like it. Don’t have any bedrail but being an electrician I’m thinking some of this unistrut laying around would work even better.
Thanks!
Yeah that should work fine 😊👍
to sharpen you use what number whetstone. Healthy greetings always from Indonesia.
I put a picture of the stone I ordered
Honestly it’s been so long I don’t remember the number
Good tips. You don't have to have a bunch of fancy stuff to have fun with wood turning.
Thank you and agreed
Hi Luie, That looks a great system you have built. I, luckily, managed to buy Tormek Jigs on eBay very cheaply when I first started turning again.
Great video Luie.
Take care my friend.
Cheers, Huw
PS Why the channel name change?
Thanks buddy 👍 I changed the name to match my Etsy shop.
I will mention that in my next video
@@spindlesworkshop9744 👍🏻
do you need to sharpen the inside too?
No, if we are talking about the same thing , just what you saw me do was the complete sharpening 👍😎
My budget is like yours, unfortunately my imagination is not. How did you make that?
Sorry
I responded on your other comment
Thanks!
A new name Louie?
Yes I changed it to match my Etsy shop I was going to mention it in my next video 👍
Dig your Woodworking skills new sub Cheers
Thank you so much for your support 👍
I use my belt sander
I have seen a few people who do that.
Thank you so much for commenting 👍
So love your video! my friend!!!~Thanks for sharing!!~~~😀😀😀😀
Thank you so much 😊