How To Install Hardwood Floors (DIY Masterclass)
Вставка
- Опубліковано 3 січ 2024
- Want to learn how to install hardwood floors? This is a highly detailed DIY masterclass on everything related to installing your hardwood floor. We cover the tools needed including hardwood nailers, saws, and mallets. From there we will cover how to prepare the house for wood floors. Starting with subfloors and moving on to what trims need to be removed. From there we will cover how to set your starting line, how to work around different obstacles, and when to use what floor-nailing gun. We will cover moisture retarders to keep your wood floors safe and how to prevent them from squeaking. Hardwood floors are a huge investment and whether you're going to DIY them yourself or hire a pro, this video will teach you everything you need to know about installing new hardwood floors.
Shop DIY Hardwood Products: lumberjackhardwood.com/
Amazon wall jack link: amzn.to/3S4xf6E
Pro knee pads length: amzn.to/3S6jXqh
Book a consultation: lumberjackhardwoodfloors.as.m...
Would you install your own hardwood floors or hire a pro?
Planning on cranking it out myself. Thanks to this masterclass, I feel pretty good about it! Excellent video!
Awesome! Glad we could help. @@MorneMarais81
If I could afford it, I would hire a pro. But I can't, so I'm tackling it myself. Been prepping the room and collecting tools and materials since Christmas, will lay the subfloor this weekend and hopefully start the actual floor next weekend. I've taken lots of notes, including from your video, which was very helpful. Thanks so much!
Masterclass? What about leveling the subfloor?
I would not hire you, never put tar paper under a wood floor. You never would see an old times that know what they doing using tar paper. They would use Rosin Paper or even news paper but never tar paper. Paper is used only to stop floor from squeaking. Wood floor has to breath or it will cup.
No BS, no music, no chatter, just straight up how to get it done right and learn to work at a good solid pace.
Some excellent tips.
Never thought about non-hardening glue, thanks for that !
This is awesome. I ended up paying someone to put in our flooring but I still watched this. Your channel has been super helpful through the process of picking the hardwood flooring. Thank you.
So glad to hear you've found it helpful!! Thanks!
This video is great! It could probably be a series of 10 videos.
Flipping the board on the table saw is great!
I have watched almost all the videos on wood floor instal. Yours is the best. You answer so many questions I have. Thank you.
Thank you! You are the first person who specifically answered a question about cleats hanging out and a crack in the tongue. I just started and I’m struggling already but you answered my question! Subscribed!
This is super valuable information! Excellent explanations and visuals
Glad it was helpful! Thank you!
Shout out to your camera man, he did a phenomenal job with capturing the important stuff and getting good angles.
Thank you for this video. Always educational
Wonderful job, herringbone looks so good. Finish is perfect too
Excellent. I came looking for a solution to changing directions and found the spline. So simple.. once you see it. Anyway, watched the whole video and will watch once more before starting job. Great job on this video.
Professional quality video!
wow! great great high quality work!
Good job brother! Thanks for sharing
Great video mate, Thanks.
Great balance of how and why.
Superb. Would love to see a chevron pattern done. Super popular in new home builds in our area. Thanks!
Bravo. Few tutorials show managing the challenging spots. Thanks!
Great video with a lot o great info!
Love your videos!
this is a great vid
Awesome video
Thank you!!
Thank you sir.
Could you link the wood floor adhesive you used. There are many choices and I want to get the correct one for my install. Thanks!
Would you glue and staple 1"x12"x16' pine tg on 3/4 osb wood subfloor over crawalspace or vapor barrier w staples? Great work!
Hi,
Your videos are excellent and very informative.
We live in Northern California. We have chosen 7.5" wide Engineered wooden flooring ( white Oak) with a wear layer of 4mm. My question is when I install the flooring should I do the combination of glue and nail/cleat or just nail/cleat is sufficient? Can you please help us with this?
if i want to go against the joists, i screw down another layer of subfloor? is there a depth I should be going for?
Any reason why you dont glue the enitre floor? If you went with a thicker board would there be an expectation to glue?
Great video! How thick is the plywood underneath? How thick is the oak going on top? My house is 1/2 ply on the joists then 3/4 particle on top. The particle board is shot. I am wondering if I can pull up the particle and replace with 3/4 oak flooring strips or replace the particle with 3/4 ply and the oak on top. Thank you in advance.
Damned good video
what gauge pin nails would you recommend?
Also, im installing Summerset pre finished/stained Hickory flooring 3/4"thick x 3 1/4" width. Do you recommend the standard flooring nails or staples what gauge or size do you recommend. By the way, if you'd like to come to Charlevoix, Mi for an install, id be a happy camper! 😁
Do you have a recommendation for the glue used in the video? The chaulk gun looks to be special use for the large "tubes" of glue. I've found Bostik adhesive in a regulare size chaulk tube and woner what your professional opinion on the product is? Thxs in advance! I'm glad I've found your videos, very helpful as im going to tackle this 475sg.ft. job myself. Everyone that installs floors in northern Michigan are booked 1-2 years in advance. I cant wait that long as my kitchen and dinning room are all stripped bare.
For starters boards that you face nail at groove side, you used 15 ga finish nailer or 18ga brad (pin) nailer? And, if 15ga, can 18 ga also be used instead or not robust enough? I’m using pre finished 3/4” plank and want to minimize holes. Thanks for video!
18 ga is fine if you glue it as well.
Great video! Thank you! You mentioned in one of your videos that vinyl is toxic ~ is the 15 pound roofing tar paper for underlayment also toxic since it’s made for outside? We need to buy underlayment for our hardwood floors and we are very confused with so many options. Thank you!!
Also does it matter if we use the 15 pound you’re using in the video or the 30 pound?
30 lb is way to thick and will cause problems where it over laps. Your best option is aqua bar B, which is what we normally use. We just have roofing paper in this video because we were shooting a video on underlayments.
You mentioned about high quality nailer for wider boards 4in and up. I plan to install 5 in boards. What do you recommend? Thanks.
You should probably glue and nail your floor then. It's called glue assist. You will need a glue special for wood floors like Berger Seidle's glues and a liquid applied moisture barrier.
@lumberjackhardwoodsupply Thanks. It doesn't seem Berger available here in US. Would Bostik Grip-N-Shield adhesive that has moisture vapor control be a good alternative? If not, anything you know of that is available in the US? Thanks.
Nice job i have this work 10 year's experience can u give me this job i work UAE Raymond sports company im foolaring sanding and polishing polishing allsol working
mann i need some primatech guns
They are the way to go!
We dont use tar paper
Been installing hardwood for 20 years never have i used it..
Yeah, I honestly don't think its a big deal either if its over a dry basement or similar.
lol it looks easy but trust me flooring is not easy
That’s not a pin nailer. A pin nailer is 21 or 23 gauge. You’re using a 16 and 15 gauge finish nailer.