How to make a 100Meter+ Ranged Wireless 4 Channel Transmitter and Receiver
Вставка
- Опубліковано 29 вер 2024
- Hi ,
This video is to show you how to make a simple 4 channel 100 meter+ wireless signal transmitter and receiver.
◾ Circuit diagram - drive.google.c...
Very Good, thanks you! I´m from Brazil!
Welcome!
Is it possible to separate the receiver circuit into four different pieces with one transmitter please reply
Please help..this circuit doesn't work😢...I spend 1000 rupees in this circuit components...please help🙏🙏🙏
Take some photos of your project and send it to me on Instagram - instagram.com/es_tech_knowledge/
Bhai me delhi se hun mjhe 2ch ka receiver banana he bata sakte ho kese banega
Caractéristiques des composants svp
Sir can i use RX470C-VO1 to make this
А эту схему можно использовать для дрона .
No
@@estechknowledge yes
mujhe lena h what is price its
2:26
What is range
seriously up to 100 meters?
More than 100 meter
@@estechknowledgesir , please tell me truly ,, will it work more than 100 meters
Because today I am going to buy it ,, please reply me sir
@@Aswin_Raaj100yes bro
what is range if it's more than 100 meters ?
@@Aswin_Raaj100maximum 10 mtrs only
Eska ek video asa bnava kitne distance tak chal sakta he
5:05
A lot of possible project came up to my mind after watching this video. Thanks alot
Bos puwede po ba ako mag pa assemble niyan 12volts. Hindi siya de remote. Gawin ko pa switch type.
hey dude your circuit doesn't work without connecting te pin in ht12e to ground
and connecting A1, A2,A3,A4 in both ht12d & ht12e to ground then it should work
am I right cuz when I made your circuit it doesn't work without doing the above
Actually those pins are like passwords, if you connect A1,A5,A6 together with the ground in 12e, then you have to do the same with 12d. Then the 12d will be able to decode the signal/data.
@@estechknowledge
Then why it's not working without connecting TE pin to ground in ht12e?
The full form of the TE pin is - Transmission Enable.
@@estechknowledge
Yeah so why didn't you connect it to the ground in your diagram 😂👉👈
😁
Doesn't work..Don't try this...Fake❌
No it is not fake it works just perfectly
@@estechknowledge first i printing your circuit and buying a components through online and connectioned it ,but doesn't work..
Awesome… very beautiful 👌 thanks for sharing my friend 👍👍👍👍👍👍🥰♥️
Can we use 12v battery in receiver?
Cool info, thanks for sharing, well done :)
Hi, I want to buy such a device but with range more that 300 meters, can you make one for me, and I will buy it from you?
Mini hidden camera 📷 banake dikhao please bro
Hello, you who teach this circuit, please include the circuit of this receiver and transmitter.
Available in the video description
send message in morsecode or display binary decimal
Can I use it for wireless ignition?
Is it possible to separate the receiver circuit into four different pieces with one transmitter please reply
That's I think about it
Schematic diagram is required
🇮🇳🇮🇳🙏🙏👍 o, p
Can I use motors instead of lights?How?
i think relay could work to connect two wire to passe the 12v or more volt
I have a task to make a similar scheme, but so that the control buttons are separate from each other. It is not rational to make the 4 transmitter board for each button. Advise the implementation of this task: 1 receiver and 4 separate control buttons. I will be grateful for the answer
h
Where I can put microphone with buzzer in transmitter and put speaker in receiver and how I can make range is very long like 20 km or more ?
❤️👌👌👌
Can I replace the LEDs with micro vibration motor? Please notice me😢😢
Hope you are well. I built the circuit exactly per the schematic. I can't the transmitter and receiver to pair. What do you think I'm doing wrong?
I have a query. In the video you have shown that your are connecting all the transistor's emitter pin to positive and the collector pins to respective LEDs but in the schematic you have shown that emitters are connected to LEDs collectors are connected to positive. Can you elaborate it.
What number did you used for the copper wire and for how many watts for 82 ohms resistors???
Is it possible to separate the receiver circuit into four different pieces with one transmitter please reply
Is it possible to separate the receiver circuit into four different pieces with one transmitter please reply
Is it possible to separate the receiver circuit into four different pieces with one transmitter please reply
Is it possible to separate the receiver circuit into four different pieces with one transmitter please reply
5:18
5:11
2:58
2:54
2:45
2:45
2:45
2:42
2:36
2:34
2:29
0:28
0:23
0:19
0:16
0:14
Hii sir tell me how to connect this in rc car and make new video how to connect receiver in rc car
😅hola
Is it possible to separate the receiver circuit into four different pieces with one transmitter please reply
can I use xy-mk-5v receiver & fs1000a transmitter instead of srx & stx modules?
Offcourse
@@estechknowledge
One more question what is the range does the that I will use modules work at?
Nice 👏👏👏👏😉👍🇧🇷🇧🇷
Skema ?
Available in the video description
Hi sir, do you know how long the battery lasts in the transmitter?
Bom dia parabens muito bom
Hi can I geve there 7,4v?
Offcourse
@@estechknowledge thanks
Klik ingin beli dimana,toko online adalah?
Will there be signal interference if multiple SRX882 and STX882 are used?
No
How can i do this with 3.6 v li-po batteries
Excellent 👍 thank you
Looks pretty simple . But when led diode blink once , that’s mean my light is running?? And when blink same led diode again, it’s light turning off ??
And I don’t need to program the chips??
And I going to use 3v battery. So I don’t need to use resistors??
Stx & srx use 5v so you cant
Sun motor kaun si jagah par lagegi aur kaun sa connection hoga yah to batao
Ingin beli yg seperti itu dimana kang
Hmm. Turn on a LED up to 100 meters away. Can see at night, not so much in day light. What is the purpose?
@Hisham Guess Since you put this way you proved me wrong. Thank you.
it's amazing
Can i control 2 receiver in one single transmitter?
Very nice👍👍👍👍 video thank you🙏🙏🙏🙏🙏🙏🙏
How can you make this into one channel?
Do not connect all the leds and buttons. Just connect one of this two. If this doesnt help search on yt. Sorry for my english
how long can i take To learn?
Buenos días. No funciona, no se sincronizan los HT. Los valores de resistencias del oscilador interno pin 14 y 15 no parecen correcto. He comprado todos los componentes identica marca pero no puedo sincronizarlos.
What you are using as power supply?
how to connect relay 220AC in it
How to connect motor in it
If you are looking for this - ua-cam.com/video/U6rAmq9_yUs/v-deo.html
how to connect relay 220AC in it
Bro buying link please give me
One video for Wire connection
There is circuit this project?
Yes it's an electronic circuit based project.
How we cand make this with 8-9 channel? Thank you
If you are asking for this - ua-cam.com/video/uAci7c8N1VA/v-deo.html
bro What is its range?
Working principle
nice, beware schematic ht12D and ht12E in oppesite order
Thanks for reporting.
Just updated the diagram.
12v battery can I use instead of 9v
Offcourse
No. 100 Metre+ .
Ye bnna ke bhijwa skte hai kya
Can we use CTBC 548 B
Relay control karke bataoo
Can i power it with lithium ion battery?
Yes
Assest name
Helloo, can you add a motor vibration to it?
I hope you will notice my comment
should be developed
can i have the scheme?
Available in the video description
Is it possible to do the same but with more channels and for 6-9v dc motors?
Yes
@@nprabhudev ok! but do you have a video or something? ill be pleased to see it
@@_Creativo if you need more channels, you need more ICs since these output only 4 pins.
@@muhammadjunaid3650 👍