Interesting. But I am interested in getting more than just a remote led. I want to be able to change the music my neighbors are listening to my liking. Obviously, that is possible but it takes sophisticated equipment that I don't have. I look forward to valuable insights with an explanatory video. I am counting on it . Thank you very much.
Thank you for the concise video! I'm hoping to reduce it's range, somehow, to use as a proximity trigger... Haven't got that far so thanks for the head -start! I'm also getting a momentary ON from LED, not sure why but I saw one of your other replies suggesting to adjust the receiver. I'll try that.
Buen día, saludos desde Venezuela, gracias por compartir tus conocimientos, EXCELENTE video sencillo y preciso.. puedes por favor hacer un video con lora E32 sin usar Arduino. Gracias
Very good video. it worked for me. Initially i used 9v. It did not work. Tried with 5v, it worked fine. Thank you. Just to get clarification. In this video, as per my understanding, the LED is always in ON state. Once the button is pressed, the LED turns OFF just for about few seconds and then turns back to ON state.. Can i have circuit having LED in OFF state initially and once the button switch is ON, the LED should turn ON. Later after the button is released, the LED should OFF. Can this be implemented using single channel or should use HT12E and HT12D ic's?
Led keeps glowing all the time and when I press the switch the led gets dimmed for a second (not turning off). Even if I keep on pressing, it is not turning off. What can I try?
Sir mujhe koi 5 mahne se kan me bol kar gali deta hai mera nam bi lekar gali deta hai je kase ho sakta hai kya mere kan me koi reciver ho sakta hai aur transmetr kisi aur ke control me ho
The LED connected to my receiver keeps blinking even when no transmitter signal is sent. I connected it the same way as it is in your video. How can I fix this?
@@techorbit76 oh okay I'll try that, thanks. Also is there any other means of contacting you if I get further doubts. Would really appreciate it if u can help me as I am a beginner
@@techorbit76 firstly thanks for the reply, step by step working of the circuit diagram of the transmitter and receiver module, u have used , function of the component used in the circuit diagram
@@kamleshchavan7451 unfortunately it's not possible to explain everything in comment box, you can search on UA-cam or google for it. hope you will get your answer
Led keeps glowing all the time and when I press the switch the led gets dimmed for a second (not turning off). Even if I keep on pressing, it is not turning off. What can I try?
Interesting. But I am interested in getting more than just a remote led. I want to be able to change the music my neighbors are listening to my liking. Obviously, that is possible but it takes sophisticated equipment that I don't have. I look forward to valuable insights with an explanatory video. I am counting on it . Thank you very much.
Thank you for the concise video! I'm hoping to reduce it's range, somehow, to use as a proximity trigger... Haven't got that far so thanks for the head -start! I'm also getting a momentary ON from LED, not sure why but I saw one of your other replies suggesting to adjust the receiver. I'll try that.
Your pleasure is mine.💖
You went off camera with the very part I wanted to see.
On the reciever, is the antenna solder bridged to the coil?????
There is a Rx & Tx where antenna has been written
Buen día, saludos desde Venezuela, gracias por compartir tus conocimientos, EXCELENTE video sencillo y preciso.. puedes por favor hacer un video con lora E32 sin usar Arduino. Gracias
In future maybe I'll do. Thanks for your comment.💚 Stay with me 😊
Sir can i use it without antenna....?
I've tried without antenna its not working so how should i add a antenna
Very good video. it worked for me. Initially i used 9v. It did not work. Tried with 5v, it worked fine. Thank you.
Just to get clarification.
In this video, as per my understanding, the LED is always in ON state. Once the button is pressed, the LED turns OFF just for about few seconds and then turns back to ON state..
Can i have circuit having LED in OFF state initially and once the button switch is ON, the LED should turn ON. Later after the button is released, the LED should OFF.
Can this be implemented using single channel or should use HT12E and HT12D ic's?
If you want to use single channel then you don't need to use any ic. But if you want to make it 6 channel then you need HT12E and HT12D ic.
What is the maximum range
excelente video.!!
útil, concreto y sin rodeos.!
muchas gracias..!!
Thank you so much. Keep supporting me 💖💖
Hello, can I use the same transmitter for three receivers?
Thank you?
Cool video shot, keep it up, thank you for sharing it :)
My pleasure 😊
Hi, i wanna know what is the range of the circuit, thanks, ur video is cool i wanna try out this project lol
10-100 meters
How to add this antenna?
It can be any wire with any length?
Led keeps glowing all the time and when I press the switch the led gets dimmed for a second (not turning off). Even if I keep on pressing, it is not turning off. What can I try?
বাহ অসাধারণ
শুভ কামনা রইল ❤
Thank you 💓💓💓
Sir mujhe koi 5 mahne se kan me bol kar gali deta hai mera nam bi lekar gali deta hai je kase ho sakta hai kya mere kan me koi reciver ho sakta hai aur transmetr kisi aur ke control me ho
Qué distancia máxima puede funcionar??
Gracias
Speak english please
The LED connected to my receiver keeps blinking even when no transmitter signal is sent. I connected it the same way as it is in your video. How can I fix this?
Adjust the pot on receiver
How about for a wireless microphone
Sir iski range ke beech mai koi object aata hai to ye kam krega ??? Like smaller hill either other item
Range will decrease
@@techorbit76 okk thanks dear
Sir if we do over soldering on rf reciever then it will work or not
If circuit connections are good then it'll work.
Hi, how I can use the same module only for conductivity not to power a led? Thanks in advance!!!
It's not for conductivity. It's only for power up electronic as like led, motor etc. and control it wirelessly. Thanks for watching 💖
Can you tell me what the current consumption of receiver module when ideal ON but not receiving anything?
check your receiver
I have a problem. So, i built it but the receiver output is 4V. When I hold the button it drops to 1V for a second and then back to 4V. Any help?
Adjust the pot on receiver
Can We Use this Circuit For Making Wireless Microphone
nope
Good
For how far it works
10-100 meter
Can we use this circuit for making wireless Webcam
No
Please Sir is it necessary to include encoder and decoder ic HT12E and HT12D ?
if you want to make it 6 channel then you have to use encoder and decoder ic
Sir i do similar like you but it does not work but i use only 1.5V cell or battery
Minimum voltage 3.7v
Is it possible to use LORA module without Arduino, in same manner ?
search on youtube
@@techorbit76 I didn't find anything like that, without Arduino. And it's reason i asked you !
@@0x6900 it's actually not possible. eyes on if somebody figured out
How can I do this with 9v batteries
use converter
50 meter ki range pane ke liye kitna volt ka supply de ya kya kare
7 volt+ , also use long antenna
Kya antina silver wire ka chal Sakta hai
yep
Thanks,but what is means of yep
@@naveenrajyadavji5875 wlc😊
@@naveenrajyadavji5875 google it
what happen if u don't put antenna? Does it will not work?
In that case you need to put the transmitter and receiver too near. The antenna is for increase range.
Thanks 👍
Wow
Thank you ❤
En vez de un foco, se puede conectar un mini motor?
please speak english bro
Broo is key range kia hai meter may
Can I use a normal switch instead of a micro switch
yep, you can
@@techorbit76 could you please explain how the circuit works. I followed the same steps but all I could get was an blinking led
@@nagavel3776 adjust the receiver node
@@techorbit76 oh okay I'll try that, thanks. Also is there any other means of contacting you if I get further doubts. Would really appreciate it if u can help me as I am a beginner
@@nagavel3776 you can contact me on facebook. Link in description
Continue Led blinking why
Use long antina
Im gonna use this for morse code but if anyone has links to where i can buy these parts that would be amazing
Here is your link:- BDT 110.11 | 433MHz RF wireless receiver module & 433 MHz transmitter module kit + 2PCS RF 433M Hz Spring Antenna compatible for Arduino
a.aliexpress.com/_mKR0X6U
Can u explain the working of the circuit diagram and function of every components used in the 433 Mhz RF transmitter and receiver module
what do you want to know???
@@techorbit76 firstly thanks for the reply, step by step working of the circuit diagram of the transmitter and receiver module, u have used , function of the component used in the circuit diagram
@@kamleshchavan7451 unfortunately it's not possible to explain everything in comment box, you can search on UA-cam or google for it. hope you will get your answer
@@techorbit76 sir matter of fact is I tried a lot but I didn't get anything, just hoping you may help me out, thanks for the reply sir
@@techorbit76 do you have any video on this
If we give 3.7 v how its range
20meter, but it's depends on your antenna also
I do this but it is do not working
What is its problum😔
Can you say
@@deepakbs8445 check your connection again
@@techorbit76
Ok👍👍
Sar ji hamen RF module chahie kahan se milega
Search on Amazon
Bro it work with out antena
He's just increasing it's range but yes, works without if you're not close range.
Which resistor you use
1k
Bhia resister is may kia kam kray ga plz ans
Plz ans
for the circuit safety from over voltage
@@techorbit76 ok
Broo risister ka is maa kia kam krta hai
I try this before and sorry this is fake! This modules not work on regular voltage you must use encoder and decoder chip or ne555
can i use a buzzer instead of led ?
yep
yep
brother i use led in that project but my led is continuously blinking and not working can u guide me ?
please share your email so i will able to contact u personally
@@saadahmad9307 adjust the receiver node
Make a rc car from this circuit
okey
Kitne metar pe kam karta he
10-100 meter
Can i use 1K resistor?
Yep
Add one relay
Thanks for your suggestion
Rc car me keshe use kare ge
you have to use encoder and decoder ic,
HT12E ana HT12D
what about distance!!
10-100 meter
What is the range
10 to 100 metre. Depends on voltage.
How to make Antenna sir
take some copper wire and role it
Range Kya hai isaki
10-100 meter
10kohm or 1kohm
1k
I have only 9 v batteries
5v maximum
What is range in meter
20-200 meters (different voltage, different results)
@@techorbit76 How much voltage needed for 220m range ?
@@0x6900 it's range 200 meters max. you can use 5v and a long antenna for maximum range
@@techorbit76 Which is best 433 Mhz transmitter/receiver available in market ?
@@0x6900 you can go for RXB6 RF module
Or dorne me
Use less video
Led keeps glowing all the time and when I press the switch the led gets dimmed for a second (not turning off). Even if I keep on pressing, it is not turning off. What can I try?
Adjust the pot on receiver
Wow
Can I use motors instead of led please reply
You need a transistor if you want to use a motor.