How to Fix iPad 2017 Fingerprint and Home Button Function | iPad Repair
Вставка
- Опубліковано 5 вер 2024
- We have received an iPad 2017 which has neither home button nor fingerprint function from our customer, in this video, we will demonstrate how to troubleshoot and repair the iPad 2017 fingerprint and home button malfunction, we hope you enjoy our sharing.
Tools and Materials Used in This Video:
Spudger: bit.ly/3drF8fy
Heating mat: bit.ly/3cmBtyo
Solder flux paste
Soldering iron: bit.ly/2XpEN7z
Tweezers: bit.ly/36SxHM7
Microscope: bit.ly/3gLIs7n
Scrape knife: bit.ly/3gQ4ANN
PCB cleaner
We provide chip-level repair training service
99% success rate for ID unlock & motherboard swapping
If you are interested, welcome to contact us: info@hcqs.com.cn
Questions are most welcome!
For more information, visit:
HCQS Official Website: www.hcqs.com.cn
Online Shopping Mall: www.hcqs.shop
Subscribe us for the latest information
---------------------------------------------------------------------------------------------
Blog: www.hcqs.com.cn...
Facebook: / hcqs.official
Twitter: / hcqs_shenzhen
LinkedIn: / hcqs
Instagram: / hcqs.official
Welding wire is really a technical job, great
Thank you very much, will keep on sharing these videos, please stay tunned.
Can u repair my broken iPad 6 home cable too?
Soldering not welding
Awesome video and thank you for sharing 😀
A good video up close of disconnecting the home button flex cable would be nice.
Well done
Thank you for your comment
Wow nice video, i just replaced a digitizer screen for a friend and unfortunately his home button ripped, I will be trying this
Amazing!
Thank you very much! Will keep making great videos!
Which part is the critical part on a home button as to the Touch ID function? Where is the actual Touch ID component? Is it imbedded in the sensor surface part (the round thingy) or is it somewhere else on the ribbon? Under the square metal cap? I ask as I have had several damaged iPads that have either torn of the whole thing near the connector on the mainboard - but also had cables that are torn out right at the edge of the button - but both give the same error message saying Touch ID could not be activated.
So I found another video of a repair of a home-button where the cable was torn out right at the edge of the button, and this kinda makes me thing that the "active part" may in fact be the in the sensor itself. It appeared that they only replace the ribbon cable intact and only kept the original button.
A job well beyond a DIY-er sadly so the iPad I have is more or less junk.
Is it possible to use a non-Touch-ID button from an older iPad and somehow bypass the activation prompt?
can we use ipad air 1th gen flexible cable?
Thanks for posting this!!
Good tip, I'm doubting if in my case is the flex, should work at least unlock feature from an Ipad Air flex in 2017 one? Not in my case
Hi. Is this applicable to ipad mini 3?
Hello I need your help, recently I couldn’t log onto my iPad Air. I used my fingerprint as it WOULD NOT log on as it said it didn’t recognise it. So I went to passcode and the screen froze and wouldn’t let me enter. Suggestions??
Every home button flex that i found in internet come with home button, and there is no possibile to desolder it! Where can i found this flat? In europe?
Same procedure for 6th iPad 2018?
I accidentally ripped the Touch ID flex of my iPad 2017. Then I saw the section where Touch ID is soldered on the flex cable. So I ordered a replacement flex cable but it came with a premounted Home Button, that is one part with the flex cable itself BUT the flex cable also has the solder pads on it. My question: Could I cut off the Home Button and solder the original Touch ID onto the solder pads? Would it work?
Hi, if you are making the same repair as we did in this video, it should be no problem
will Touch-ID still be working after this fix?
? Like to know to
@@simonclarke1383 please, tell us.
do your eyes work?
Yes that's why he went through the trouble of soldering it...if he didn't he could've just replaced the home button and boom
i didn't know such treasure was hidden below that insulator tape.thanks for this tip,
Not a problem, please stay tunned, we will keep sharing helpful tips and tutorials ~~:)
Nice... my problem solved can you tell me where can i find the new flex cable like this one
hi, we can offer you this flex cable, do you want order from us?
Yes how to order
@@Kumar.7867 you can regist an account on our online shop hcqs.shop
First like ~~~~
Thank you for your comment!
Is this the same with ipad 7th gen model A1566?
Can i do the same step with ipad 7th gen home button flex cable? I bought a new flex cable, i accidentally cut the original one.
Whats the beat called?
竟然有中文字幕!!,
嘿嘿,没想到吧~