NEW Speedybee F405 Wing MINI
Вставка
- Опубліковано 2 жов 2024
- Link: www.speedybee.... (link should be live soon)
Thank you for taking the time to watch the video. You can find me on social media at / painless360
/ painless360
www.thingivers...
R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!
If this video helped you and you want to support the channel you can use these links:
/ painless360
paypal.me/pain....
Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.
If you liked this you can see more R/C related videos on the channel - / painless360 , use the playlists to find entire series on topics you might find interesting.
Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.
Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.
LIKE and SUBSCRIBE and above all - Happy Flying!
#speedybee #flightcontroller #review
They're making some premium products for budget prices. Great work SpeedyBee!
1:56 - I like these coloured pins a lot. Always provides an additional orientation to avoid to mess up things.
As a total novice, I was very impressed with the quality and presentation of their F405 wing board. I remember fumbling the soldering of AWG 14 power wires and needing to re-solder; good quality board and pads, since they didn't 'lift' off. Quality all-round.
Amazing, SpeedyBee brings FPV Hobby back to life!
Very nice. Looks like great fit for Nano Goblin. I wish F4 AIO and F7AIO were in stock though. Great FCs for drones that use 4 ESCs.
Finally, the battery pads in the front. In my builds it seems like the battery is always forward of the flight controller, the ESC pads are hit more miss when it comes to location, however the ESCs connections don't need to be moved like the battery connection. Seems like there is always more room behind the FC than in front of it. Plus seems like in most of my builds, most of the servo connections come from the back of the plane, not the front.
Bang on! I agree wholeheartedly. Because most boards are built for quads.
Hi Lee, WoW Speedybee is killing it with their new products. I can't wait until my next build to try it out. Thanks again for the video and information about Speedybee new products.
love the layout and instructions BUT only 4 servos show up in the mixer, cold solder on the pad for the servo rail power, vtx pad had solder but not bridged, other that that i still like it, mauby the next one will work right
How odd. They are working perfectly here for me. Happy flying
Just ordered one of these to throw in my Lil Glidr build I'm doing because it looks sooo tiny and will fit nicely in a frame that isn't actually meant to hold anything.
Best of luck with the build!
Well I know what I'm buying next! Thanks Lee!
Wow... If it's not more expensive than the other SpeedyBee wing FC... Then it's a non brainer, Lee! 😮
Great review as always!
Stay safe there with your family! 🖖😊
The Speedybee takeover has begun 🎉
Just be aware that if one connects a ELRS receiver on the R1/ T1 pins, the firmware update will not work! I just spend quite some time to figure that out until I realized that the already connected ELRS module was the problem...
ua-cam.com/video/_7cZ52WPHjc/v-deo.html
It's not uncommon... best of luck!
@@Painless360 He he, I should watch your channels videos more often (great channel, keep up the fantastic work!)- it would have spared me a lot of time..
good quality, good price (including cables etc) and small form factor. there's nothing to dislike
I see they still haven’t fixed the one flaw in the TX1 and RX1 pins not bring on a nice lockable plug like the GPS and LED JST locking plugs.
Hi Lee, love all your videos and all the info and teaching you share, want to ask you, I'm having problems with the speedy bee f405 wing with a t1 Ranger hee wing. It connects and start working properly, but at some point, al servos and motors stop working, fortunately I was able to discover this in bench testing before maiden. Any ideas on what could be wrong? Would love your input on this. 😅😅
Without a lot more information, it's tricky to guess. I'd do a thorough visual insoectiin and start unplugging things to see which ones stop it running... Best of luck
Thanks Lee - just ordered one for my next project. Looking to add to a Phoenix 2400.
Perfect starting point for a little tailsitter vtol ?
is it possible to run the O3 on a 2S bat with this FC? I mean it is possible but will it handle voltages under 7.4V what is necessary for the O3 air unit?
Not sure, I don't fly the 03.. Best of luck
The most interesting thing is the possibility fo connect an external bec !
Hi Lee, thank you so much for your informative review.
I found this video looking for a stabilizer for my MPX Easy Star 3 (Trainer airplane). I have been considering options like HobbyEagle, Sparrow, etc. All these options are easily above 60 EUR. However, there is this fantastic full flight controller with tons of features around 40 EUR? This seems to be no brainer! Am I missing something?
Thanks again!
Nope, you're not missing anything. This is a bargain (like it's bigger brother)...
Great product, i have a couple normal size ones and i love them, will deff get some of these as well
Nice video as always.
Wat do you mean by: "if you want tot limit the heat dissipation in to your video transmitter"? @6.45min
Many components have a voltage range they will work with. Those higher supported voltages need to be dropped to the level that the hardware actually needs. That excess voltage is dissapated as heat so supplying the much higher voltage just makes it much hotter. If a unit needs 5-12v, I try and run it at the lower 5v voltage levels for this reason. I hope that helps.. Happy flying
Great informative video. What is the difference between the Speedybee 405 and Matek 405 and which is better? Thank you in advance sir.
Better in what way? ua-cam.com/video/LjRATn6FWFc/v-deo.html
Hi. I would like to ask you what ESC are you recommend to this FC. I want to build a Nano Goblin with DJI O3 Air unit. What kind of batteries should i use to stay up der 250g. I am total beginner, never built a RC before😅
Check out my builds, they are designed for the new builder and cover all of the steps... Best of luck
Can you connect a DJI Air unit to this and still use the DJI controller ?? if so how do you connect ??? thanks
Yes, same as any other flight controller. See ua-cam.com/video/kHm9mE_IDeQ/v-deo.html for examples..
Having the PDB board at the top is acually a great idea. I'm using the normal sized Speedybee F405 Wing with the PDB at the bottom; needed to cover the soldered leads as sometimes it touches the bottom pins.
I'm still figuring out on how to expand the number of PWMs on the F405. I'm maxing out all 9 after putting in the pan/tilt headtracker on. Haven't found any good solution including on how to remap the 2nd motor to servo. Any ideas Lee?
Would this work well on a rc boat too?
It would. Happy sailing!
Well, damn! Just after I bought 2 AtomRC F405 NAVI Mini... and those I don't recommend, at least as long as they use the wrong inav-target for this board (short: blackbox logging does not work on this board at the moment).
Small version of the cursed YRF-4E, might benefit from this tiny unit, as it is powered by two 45mm fans . Not that itvwould ever reach a way point....lol but the tiny version is foam and is very light . 3gram servos seems wires keep getting smaller , and those darn tiny pads , ah this comes with wires major benefit. If I get it put together I'll send a picture. If it flies it will be the first model of the plane ever flown by R/C , thus the quest to build it. Original went in for new paint at museum about 12 years ago, I have some brushes in the garage perhaps I should lend a hand ..air force said no ....lol. Take care.
There is no cable/connector for the telemetry,,,
How can I access the pin for the S-Port ??
I'm guessing you are not a regular viewer.... ua-cam.com/video/vvetICkhmkk/v-deo.htmlfeature=shared
@@Painless360 Thank you very much for your reply.
The Cable/connector is not provided in the "Mini 405" kit, only in the regular size 405 kit. They probably forgot to include it. So now I have to find a 6 pin GH1.25 telemetry cable to order.
This must be SpeedyBee's answer to the Matek F405 WTE. Just in time for some smaller scale builds
I’d read that Speedybee was going to be releasing a V2 version of the “big” wing FC with a revised power board which supported Pinio for the VTX power rail. Hope they include that update in the mini.
Thanks Lee! I am absolutely dumbfounded that this board is $35! Wow! Talk about entering the market with a bang! I just ordered one off of your link.
All we now need is SpeedyBee to produce an HD FPV camera/transmitter/goggles system at a more reasonable price?
At minute 1:30, you actually dropped the pin bar from your hand when you realized it was the German version ;)
My one wish would be a pit switch but that’s a tiny gripe considering all the features and the price. To me there’s almost no reason to use the bigger one for most situations, you’re barely giving up any features.
Looks like a strong competitor to the Matek F405- WTN....🤗
Excellent review very helpful thanks Lee. for less than $40 that little thing can do all of that simply amazing .
just bought one looks great now fitting in my sonic classic see me fly aaaarrr.
Best of luck!
This looks like just the ticket for my ZOHD Drift. Thank you for the review!
Hi, I want to use this device only to power the dji o2 air unit. (first of all)
- no motor, servos etc.-
Do you see any problems with that?
It'll do that. I assume you want it for the OSD too? See my builds using this FC... Best of luck
Thank you very much.✌🏼
Great Video as always , i mean Speedybee is really doing an amazing job with those FCs for wings
When are these hitting the US?
That's a question for your local Speedybee reseller... Happy flying
Hi there, do you know how can i control the led of Hee wing T1 with this flight controller? I have found one LED solder pad on the board, but where the other 2 wires will go? This led solder pad is for the signal wire right?
A spare 5v pad and a GND pad.. Best of luck!
Thanks very much for the quick reply. I have watched all of your fixed wing build and review videos so far. I am new to fixed wing hobby. Lot to learn. Thanks again.
I mount my fc with heavy duty velcro it is sorta tough to remove but if you need to remove it is still doable
thank goodness i ordered one of these yesterday, they're probably out today
Love it so much, my next build going to use this mini version
hello sir nice video!! , mmm i actually have a question so i was making and rc fixed wing airplane and i wanted it to go fast and thought about using drone ESC and motors since they are powerful and light weight with a pixhauwk and flysky-i6x transmitter and receiver and i was wondering would i need a drone flight controller ??? cause since the ESC can be programed and it supports controlling each motor enviously and the pixhauwk have the gyro and every thing + i m not gonna do insane drone stuff like maneuvers and etc would it be a problem to not use a flight controller . and thxxxx very much !!!
the ESC velox-V50A 6S 4IN1 32BIT from T-motors
and the motor is VELOX V2812 7-8"Longrange Fpv Racing Drone Motor 6S KV925 with a gefan 8040-3 prop
Please check out my 'Motor and Prop' series that covers all of that stuff for you... Best of luck!
i wonder if this will work for a micro vtol build
would be great to see a full build video using this
Yes, should be. See my other builds. Happy flying!
@@Painless360 will do. great videos btw!
The pricing is insane. Super stoked for this
this is going in my fpv car
That would be a great use for it! :D
Hi. Ive setup my f405 mini on inav 6 as a rover, so i can use it on my rc car. And connect to dji 03 air unit on goggles 2.
Got goggs setup fine and have image.... also i have working steering servo at S3.
The issue im having....is arming the thing. Everytime i flick switch on my MT12 to arm...the blue light and buzzer repeat in short fast blinks... till i get sick of hearing it.
I cant find anything to tell me audio error beep meaning.
What is it an how can i rectify it please.
Cheers
github.com/iNavFlight/inav/blob/master/docs/Buzzer.md should help you identify the cause. Best of luck
Hi thanks for reply..it ok ive sussed it all out. Were all up n runnin on full power!
ua-cam.com/video/hEEdlsOV-fo/v-deo.html may help...
Wow! Just as i install my first 405
Interesting video, thanks.
These boards are really good not only for wings, they're also good for land based vehicles such as crawlers etc. I do wish they'd incorporate a wing/rover setup to help being people more in to the car side of things.... They're almost already there with this kind of set up too!
Wait, you use this with a crawler? I assume just to do FPV part and not the stabilization?
@@shadow7037932 Yeah, I'm using something similar with my crawler, not for stabilization although it can be done if you want a camera gimbal. I mainly use it for the servo outputs, OSD and GPS data which comes in very handy for long range
Does this support frsky fport protocal receiver
Not sure, I don't use that here.. Best of luck.
Will this fit in a talon 250g?
Dimensions of the board in the video - I'd measure the space you have... it might!
Thanks
Thank you! That was very kind!