[TUT] Seagate Expansion Desktop 5TB öffnen [Deutsch][2015]
Вставка
- Опубліковано 4 тра 2015
- In diesem Video wird die Expansion Desktop 5TB zerlegt, um an die Festplatte zu kommen. Somit kann man die Festplatte z.B. im PC einbauen.
Achtung: Garantie geht bei dem Vorgang verloren!!!
Kleines Update: nach 7 Jahren sind nun 2 von 4 HDDs defekt. Eine mit 12xx kaputten Sektoren, die andere mit 4xxx. Teste ich diese im originalen externen Gehäuse, treten die Fehler nicht auf. Also Vorabtest im externen Gehäuse ggf. falsch.
Mit einem Taschenmesser ist mir das ganze gelungen ohne das die Laschen ausreissen.
Thanks for taking the time to make this video, it was very helpful.
Awesome, just moved my power-failed 5TB Seagate drive to a new $10 enclosure and all is working well! TYVM!
Sehr schönes unboxing. Danke für die hilfreichen Tipps. Nach so einem Video habe ich schon lange gesucht.
I didn't really understand because i'm not german, but the video sure did help, thanks!
Herzlichen Dank für diese Anleitung. Alles perfekt geklappt. Konnte hierdurch meine Daten über SATA-Umbau selbst retten, da Netzanschluss-Platine defekt war.👍
Vielen Dank für das gute Video. Die Anleitung funktioniert so ähnlich auch für die kleinere externe 2.5 Zoll Festplatte von Seagate.
Dankeschön! Das Video bestätigte meinen Verdacht bezüglich der Öffnung. Statt des Skalpells kam die feine Klinge eines Victorinox Taschenmessers zum Einsatz und statt diese blauen Öffners wählte ich ein Messer mit feststehender Klinge. Das ist gefährlicher, funktionierte aber prima. Nun habe ich 2 HDs zum Sparpreis (:
Danke für das Video. Meine 4TB-Version zeigte kein Lebenszeichen mehr und ich vermutete zu Recht den USB-Adapter als Schuldigen. In einer SATA Tray kann ich das Laufwerk wieder problemlos weiter nutzen.
Genau das hatte ich gesucht. Vielen Dank für das nette Tutorial!
Gutes Video, alle Fragen beantwortet.
War eine super Hilfe! Besten Dank und ein dickes Like!
Konnte jemand erkennen ob es eine PMR oder SMR Festplatte ist? Leider hält er sie nicht einmal richtig in die Kamera...
Protip: Don't use a Razor for the seam, instead, place a flat head screw driver between a rubber foot pad and the edge, there is a small lip you can push on to open it, use something softer than metal if you want to save the case.
Wow that's great, so now you have a regular hard drive without the warranty!
Thanks for the video, very useful and it worked great!
Viele Dank für das Video, dass hat mir sehr geholfen !!!
does it make any noise, heat up, any problems so far ?
i'm not sure if reviewer says this but before you open up the case make sure it works 100% with real surface test. it will take some time but worth it. also i found out if you have sligtly more patience you can pry it open by a creditcard from one side then slowly go around with a second creditcard. you will hear suttle noises while doing it. then finally when one of the creditcards is placed on the corner of the long side where the serial number is. now just bend creditcard slightly at the very end of the drive. it pops and you slide card further and bend it again. repeat for all 4 sides. this leaves no marks on unit at all. so if you we're to return it for warranty reasons you'd get a full replacement.
Is it 7200 rpm and much mb buffer?