New Hertz S8 DSP. Ford F350 DSP UpGrade Part: 2

Поділитися
Вставка
  • Опубліковано 15 лис 2023
  • This channel covers new audio installs, as well as 911 install rescues. There will cars you see often and other that are rare.
    From time to time I will do how to's on my personal 2016 Ford F150.
    We work on exotic, domestics and popular Japanese vehicles. There be thing you may see often and other thing you see rarely.
    You will see things related to the interior and the exterior. It will include the audio system, wheels, tires, and anything that is involved. So hang on to your hat and enjoy the ride.
    You will also see audio tips..
  • Авто та транспорт

КОМЕНТАРІ • 35

  • @jasx1485
    @jasx1485 Місяць тому

    Awesome work

  • @digginglow
    @digginglow 8 місяців тому

    Great video. That was funny, I know how you feel about the epicenter 🤣

  • @frankm8092
    @frankm8092 4 місяці тому

    Excellent ! Thank you very much

  • @joegarcia6276
    @joegarcia6276 8 місяців тому

    Nice

  • @clementparker5015
    @clementparker5015 8 місяців тому

    Finally a video from installation to to tuning. All videos that I've come across about only talk about the software of dsp's no real real time test. How good is the hertz compared to helix ?

    • @lancesautovlog
      @lancesautovlog  8 місяців тому

      The Hertz is a super basic unit. The Helix is way better.

    • @clementparker5015
      @clementparker5015 8 місяців тому +1

      @@lancesautovlog OK thx

  • @mikepsychles
    @mikepsychles 3 місяці тому

    Hopefully you will see this... Quick question for you - I noticed that when you were setting the input sensitivity that the test tone was inaudible. Was this because you disconnected the output or does the app do this? When I attempt this same thing, the test tone (sweep tone) is barely audible and does not respond to volume control - I have been assuming that this is a problem. Thanks.

    • @lancesautovlog
      @lancesautovlog  3 місяці тому

      The unit will mute the outputs when it's doing it.

  • @niyasnazz
    @niyasnazz 8 місяців тому +1

    Nice 👏🏻 ver helpful , i would like to ask you a question, i have audio control LC7i. can i use LC7i out to this DSP input ? Is it ok or wrong? What’s your opinion?

    • @lancesautovlog
      @lancesautovlog  8 місяців тому

      The LC7i is designed for summing signals in most cases. The Hertz DSP has 6 high level inputs, so a LC7i should be needed. What type of vehicle is it?

    • @niyasnazz
      @niyasnazz 8 місяців тому

      Kia seltos

    • @niyasnazz
      @niyasnazz 8 місяців тому

      I wouldn’t like to change my head unit that’s why I used LC7i . Now my sound system connection is
      Lc7i 4 output to one 4 channel Sony es series amp for 4 component speakers (front&rear doors)
      & lc7i 2 output to kicker mono amp for sub

    • @niyasnazz
      @niyasnazz 8 місяців тому

      That’s why I asked ,if I use hertz s8 dsp
      can i get sound improv?

    • @lancesautovlog
      @lancesautovlog  8 місяців тому +1

      @@niyasnazz If your Sony ES amp is current then it has the ability to do Highlevel input and has a low level out to run a subwoofer amp. So the Audio Control isn't really necessary.

  • @miatgrad76
    @miatgrad76 5 місяців тому

    Can you raise the low pass on the front midrange higher than 3200htz? It doesn't let you go any higher thaan thaat on the app. My front mids can play well up to 5k or so.

    • @lancesautovlog
      @lancesautovlog  5 місяців тому +2

      This system was a 2 way, the tweeter is only playing 3200Khz and above. The mid is playing 3200KHz to maybe 80Hz.

    • @miatgrad76
      @miatgrad76 5 місяців тому

      I get that but it looks as though the front mid dropdown (at least on the app) will only go lowpass around 3200, the higher selections are grey'd out. The rear mid woofer dropdown allows the mid to be played much higher, that is strange to me. I cant reach anyone at Hertz so I appreciate your info, great vid btw

    • @lancesautovlog
      @lancesautovlog  5 місяців тому +1

      Are you using expert mode?

    • @miatgrad76
      @miatgrad76 5 місяців тому

      I dont own the unit yet, before i buy it, i want to make sure i can run the x over up high enough. The demo mode on the mobile app stop the mid from playing any higher than 3400htz, the higher values are grey'd out and not selectable on the app. I just wanted to confirm I can run my front mids up higher than 3400htz where the app limits you. I hope the pc software allows you to get closer to 5k. Thats all im trying to find out

    • @lancesautovlog
      @lancesautovlog  5 місяців тому

      @@miatgrad76 have you tried changing the low pass slope to 0?

  • @frankb9175
    @frankb9175 8 місяців тому

    Wheres is your shop located?

    • @lancesautovlog
      @lancesautovlog  8 місяців тому +1

      I’m located in Huntington Beach California

    • @frankb9175
      @frankb9175 8 місяців тому

      No way whats your shop name? Im close by

    • @lancesautovlog
      @lancesautovlog  8 місяців тому

      @@frankb9175 Lance’s audio Design.
      7442 Talbert Ave
      HB
      I share space with automotive entertainment.

  • @shanebrathwaite1940
    @shanebrathwaite1940 8 місяців тому

    ⁠hello there I have a question I want to add system to my factory head unit in my 2012 Acura TL I’ve doing research on the hertz DSP do I need an lC7 to catch signals or is the hertz DSP capable of summing the signals ?

    • @lancesautovlog
      @lancesautovlog  8 місяців тому

      Do you know which audio system is in your Acura? Bose? Alpine?

    • @shanebrathwaite1940
      @shanebrathwaite1940 8 місяців тому

      @@lancesautovlog ELS system

    • @lancesautovlog
      @lancesautovlog  8 місяців тому

      The Hertz DSP would work without using the Audio Control LC7i. Arc Audio has a nice one as well.

    • @shanebrathwaite1940
      @shanebrathwaite1940 8 місяців тому

      @@lancesautovlog thank you so much appreciate your quick reply