Overview at the link pipe fabrication process and sweet melody of the Yoshimura R-55. Music: On the Ground by Kevin MacLeod is licensed under a CC Attribution 3.0.
I will try to shoot the video if possible, but there is little to none of storage space, probably just your wallet and phone, but not recommended to keep your phone there, too much vibrations. Some keep a cloth and perhaps a disc lock underneath it.
Sorry I didn't ask about the pipe measurements. I guess would be either it's the same with the OEM one, or slightly larger. They can make it even larger if that's what the customer wants.
What R-55 exhaust did you use? Found another video with an R-11... wondering if it has to be a specific one to make it fit with the CBR650f 2018 model.
R-55 / R-11 are the muffler models only, which one you pick, you still have to make the custom link pipe and chop the OEM system to install, there's no plug and play.
Do you happen to remember what the size of that piece of pipe that you added and welded in the video was? I was thinking of making the same modification to my stock exhaust for my 2014 CBR 650F and that information will be quite helpful to me.
The CB/CBR 650F is CKD while the CB400 is CBU here in Malaysia, which means the CB400 costs more than the CB/CBR 650F. The fit and finish of the bike is alright, for the category it's in. I'm not sure about issues but they did announce a recall on a wire loom, the length was a bit short for prolong usage might cause tear/fraying so they decided to replace that wire loom. Apart from that I'm not aware of other issues.
Yoshimura R-55 is a generic type muffler, not specific to any model. Which is why custom pipe fabrication was needed for the muffler to fit for the bike, as shown in the video.
You can make it fit, but you most likely need to fabricate a custom bracket and mid pipe to link it up to the bike and header. Yoshimura does have a specific model for CBR1000RR if you just want a plug and play model.
Do you mean me? I have always gone with black rims, mainly because they are the easier to conceal if the rim is dirty, especially the rear wheel from the chain lube stains. :)
Que gran cascarota trae de escape la moto de fabrica que no les saldra mas barato ponerle otro tipo de escape que se mire mas bonito por ejemplo un yoshimura o algo asi
I don't have the details, you can look up "Mussan Motorsports" for their Facebook or contact details.. The shop should be in Sunway area not sure if still there haven't been there for quite some time.
Sweet bike, how much would you reckon this bike costs? Shame we never got it here in the PH since we're only so far apart lol; I'd love to own one. Nice channel btw, subbed.
Yes it's possible to make/fabricate your own custom piping, to ensure the engine runs good you can have it dyno tuned with PC5 or any other tuning/tuner product. Yoshimura have many generic muffler models that can be fitted to most bikes unless otherwise specified in their product model.
how much does it cost (dollar) that include Yoshimura R-55 with custom link pipe. I lived in THAILAND and really love this sound++ Are you export this exhaust pipe right?
Hi, the link pipe fabrication begins from MYR 250 and up, depending on what kind of link pipe and how complex it is to fabricate. The exhaust is a used Yoshimura, I do not know the price the owner got it for. Sorry, I don't sell exhausts/pipes, this shop does not mass produce them, it is custom made upon customer walk-in.
+TheSighBored ahhh i regret that I really thank for information and hope u release any video for any biker use for guide the way to make their motocycle ^^ like me
This exhaust there is no sale for this bike on ebay only find this model Yoshimura for GSXR and R6. If I buy a compatible tip for these GSXR or R6, then you can adapt to 650F? This service in exhausts company is easy to do is not it? Thank you great job , hug from Portugal.
This R-55 model, if you look under the Yoshimura site, can be found specific for certain motorcycles, or a generic version. For this bike the exhaust was the generic model and custom fitted to the 650F with link pipe and bracket. You can fit any exhaust taken from any bike since you are going to make a custom link pipe to fit the exhaust and bracket (holder). The exhaust shop featured in the video does not make pre-fabricate the link pipe, it is based on walk-in / appointment to custom make the link pipe. Your exhaust specialist should be able to make the pipe, I'm not sure about the cost.
If you have a look at their website you can see the mufflers R-55 looks the same for different models, just depends which one you want. www.yoshimura-rd.com/pc_combined_results.asp?tab=product&search_prod=((searchlike~p.sku~R-55|Or|searchlike~p.nm~R-55|Or|searchlike~p.ds~R-55)|Or|searchlike~p.search_terms~R-55)&search_keyword=R-55
+Muhammad Harith Mohd Alauyun Price starts from MYR 250 upwards depending on what the customer wants.
TheSighBored sy pakai motor zx6r mcm tuan..tapi tidak tau area mana nak dpt parts motor..boleh msj di 011-10141423
2:29 that silvia 🔥🔥
Yellow one?
that silvia in the garage tho!
Next bike goal !!! Awesome vid mate!
Love from a Cambodian motovlogger ;)
Ride Safe!
Thanks! RSSR to you too!
Eww finally I found the legendary comment 😂 bro zk
Eita ronco da porra mano kkkk
Wow amazing sound.
handsome bike, hopefully i can own one someday :)
Eu choro pelo uma moto dessa é o meu sonho de consumo Deus me abençoe meu Deus que um dia eu possui uma moto dessa antes de morrer!!!
Love those steel toe shoes working around power tools like that that's really clever😤😤
That's how they work.. Hahaha..
so nice pipe, sound like a bigbike
best sound of yoshinura i've ever herd
It sounds like hell itself !! ❤️
Hell awakening.. LOL..
Hi....I am from Brazil......wowww......beautiful....wonderful....sound.....very loud....congratulations my friend.
Awesome..
Thats honda for you..
You should wear hearing protection, my friend. By the way, excellent video.
Hugo Barros de Souza typical malaysia
Hearing protection? He rode it without a helmet 😂
wooowww thats good modify........
Ca lui va vachement bien dit donc!
Wow Nice honda Cbr
Ridesafe always paps I'm here your new friend
Ride safe & safe ride to you too!
great job no one do that in my country
sounds great!
Brutalidade !!!!!
Anthony, can always find a loaner stock exhaust system to install before sending for any warranty claim, this is not something new.
TheSighBored apa nama kedai nie
TheSighBored ส
TheSighBored you is dog
ai Galera, So tem uma coisa a Falar, O Motor e Bruto Tah Ligadoo... Hipnotiza Legal as miinas kkkk
H
the driver, how tall is he? tell him to use protection doe
I don't have his height, estimated 167-170cm, yes we have helmets.
Your exhaust is good
Can you make a video on the storage compartment of this bike (if it has any) under the seat?
I will try to shoot the video if possible, but there is little to none of storage space, probably just your wallet and phone, but not recommended to keep your phone there, too much vibrations. Some keep a cloth and perhaps a disc lock underneath it.
wow wow great sound better than R 1
ชอบสุดๆ ได้ยินเสียงโดนจัง
monster sound!
Chingona esa moto 😍
Nice video
Love it
Thanks for viewing 😁
wish they had this on the US
You mean custom made piping?
Esse painel parece um óculos de mergulho
Very good
Dont mess wit the stock exhaust
O escape da minha moto e yoshimura, da um ronco sem igual.
โอ้โห เสียงสุดยอด(ช้อบชอบ..!?)
good work
Mantap suara nya ommm. Buat honda cbr 250rr, suara nya sama egk mas kaya cbr650
Saya pun ade moto cb650 :) from alam megah
Cool, this owner is based in Kemaman, came all the way to Sunway to do the exhaust.
Dapur kenelpotnya besar gitu ya yg bawaan kayak sarang tawon hehe maklum sy Blom pernah nyobain
this is nice.... very good sound indeed ... (y)
good job
❤❤❤❤
ท่อราคาเท่าไรคับ สั่งได้ที่ไหนคับ ขอช่องทางติดต่อด้วยคับ
TheSighBored, what size adapter did you weld to the header and what size is the pipe from the header to muffler.
Sorry I didn't ask about the pipe measurements. I guess would be either it's the same with the OEM one, or slightly larger. They can make it even larger if that's what the customer wants.
R.I.P Headphone users, including me
R.I.P you
nah its cool its music to my ears
gila man itu bru motor...gak kyk yg di gas doang....
Sabri Muhammad
What R-55 exhaust did you use? Found another video with an R-11... wondering if it has to be a specific one to make it fit with the CBR650f 2018 model.
R-55 / R-11 are the muffler models only, which one you pick, you still have to make the custom link pipe and chop the OEM system to install, there's no plug and play.
TheSighBored are there any decent places to get link pipes? Don't have the kit to weld or chop up my old link pipe so would rather buy one
I'm not aware, but the easiest is to get the full system exhaust from the big brands. By now they would have full system available.
TheSighBored I fancy a Yoshimura and they don't particularly make one, not one that sounds like that does hahaha
awesome...
Do you happen to remember what the size of that piece of pipe that you added and welded in the video was? I was thinking of making the same modification to my stock exhaust for my 2014 CBR 650F and that information will be quite helpful to me.
Sorry I didn't take note of the pipe diameter/size..
just wondering thinking of getting cb650f or cb400 i heard the cb650f is not best quality tho .is it a good bike ?.
The CB/CBR 650F is CKD while the CB400 is CBU here in Malaysia, which means the CB400 costs more than the CB/CBR 650F. The fit and finish of the bike is alright, for the category it's in. I'm not sure about issues but they did announce a recall on a wire loom, the length was a bit short for prolong usage might cause tear/fraying so they decided to replace that wire loom. Apart from that I'm not aware of other issues.
เปลี่ยดแค่ท่ออย่างเดียวใช้ไหมค่ะ
Gambiarra.
For which particular model is this exhaust? I was searching for CB650F but appears that Yoshimura doesn't offer specific muffler for this model.
Yoshimura R-55 is a generic type muffler, not specific to any model. Which is why custom pipe fabrication was needed for the muffler to fit for the bike, as shown in the video.
TheSighBored Will it fit from Honda CB1000R ?
You can make it fit, but you most likely need to fabricate a custom bracket and mid pipe to link it up to the bike and header. Yoshimura does have a specific model for CBR1000RR if you just want a plug and play model.
Good job...that can 0:35 looked like a gasoline container.
what happens to the lambada sensor after this is taken out of the exhaust standard unit?
The sensor is at the header section before the cut, it is left untouched.
ajib....
wooooWW...
Thanks for viewing
@@thesighbored 👌👌🤘
What did the speedometer do at 1:56? Is it broken or just an error? I don’t know what was that
It's just a blip, not broken or error.
Thanks for the info. subscribed and liked.
is it easy done without full system ? plz let me know and the size of the custom pipe thanks in advance
Sorry I didn't find out what was the pipe size but it is definitely larger than the stock.
which colour you've painted for your wheels can you suggest
Do you mean me? I have always gone with black rims, mainly because they are the easier to conceal if the rim is dirty, especially the rear wheel from the chain lube stains. :)
Beauty
Que gran cascarota trae de escape la moto de fabrica que no les saldra mas barato ponerle otro tipo de escape que se mire mas bonito por ejemplo un yoshimura o algo asi
Un escape para esa moto está arriba de los mil dólares ya que es el exhaust completo. En cambio con lo que hizo le salió en no más de 500 dólares.
Sarap sa tenga
อันนี้ ไช่ สลิปออนใหมครับ
Which matwrial you used to make it
Stainless steel.
bro ada details tk pasal ekzos/place/price ni?
I don't have the details, you can look up "Mussan Motorsports" for their Facebook or contact details.. The shop should be in Sunway area not sure if still there haven't been there for quite some time.
What size Millimeter is cup welded to header?????
Unfortunately I did not take note of the measurements..
what is the diameter of the fitting and the thickness?
Unfortunately I don't know the size of the pipe used.
Pwd din bsyan sa rider 150
Nt just tgok kt phoenix western fb :)
Menggelegar cok cok
Contou o escape original? Se tá louco kkkkkkk
Mantul👍
Nice bro
Sweet bike, how much would you reckon this bike costs?
Shame we never got it here in the PH since we're only so far apart lol; I'd love to own one.
Nice channel btw, subbed.
It's about MYR 42,000 on the road (with insurance and road tax). Didn't know it wasn't available in PH, maybe in the future. Thanks for viewing!
TheSighBored
Damn, It's the same price as a z1000 here.
Would probably just save up for a z then, thanks!
Wow that's nice if the Z1000 is same price as this 650F.. I would buy the Z1000 too.
Berapa RM buat custom link pipe?
Cek shound SC project and toce, arow
padu
I wish mine would shoot flames like that.
Full system usually will have some flames
Tiếng lực quá bác
Seram amat suaranya
Hello there.i am from Chicago,USA. I would like to ask you,can I do something like that for my bike z1000 ABS,2014.please tell me ,thank you so much
Yes it's possible to make/fabricate your own custom piping, to ensure the engine runs good you can have it dyno tuned with PC5 or any other tuning/tuner product. Yoshimura have many generic muffler models that can be fitted to most bikes unless otherwise specified in their product model.
how much does it cost (dollar) that include Yoshimura R-55 with custom link pipe. I lived in THAILAND and really love this sound++ Are you export this exhaust pipe right?
Hi, the link pipe fabrication begins from MYR 250 and up, depending on what kind of link pipe and how complex it is to fabricate. The exhaust is a used Yoshimura, I do not know the price the owner got it for. Sorry, I don't sell exhausts/pipes, this shop does not mass produce them, it is custom made upon customer walk-in.
+TheSighBored ahhh i regret that I really thank for information and hope u release any video for any biker use for guide the way to make their motocycle ^^ like me
You're welcome.. I will do my best, thanks for viewing!
The lose wiring near catalytic converter... does that get plugged in again?
Are you referring to the O2 sensor? Yes it gets plugged back in.
TheSighBored Yeah. Do you make a custom mounting point for it?
Actually I had a look at mine and noticed you must cut off after that
Yes, you are correct, the cut is made after the O2 sensor port, no modification needed.
This exhaust there is no sale for this bike on ebay only find this model Yoshimura for GSXR and R6.
If I buy a compatible tip for these GSXR or R6, then you can adapt to 650F?
This service in exhausts company is easy to do is not it?
Thank you great job , hug from Portugal.
This R-55 model, if you look under the Yoshimura site, can be found specific for certain motorcycles, or a generic version. For this bike the exhaust was the generic model and custom fitted to the 650F with link pipe and bracket.
You can fit any exhaust taken from any bike since you are going to make a custom link pipe to fit the exhaust and bracket (holder).
The exhaust shop featured in the video does not make pre-fabricate the link pipe, it is based on walk-in / appointment to custom make the link pipe. Your exhaust specialist should be able to make the pipe, I'm not sure about the cost.
Kaunsa silencer hai
Ashwani kumar yoshimura r55
Where is this place ? U customed the link pipe
Yes it's a custom made link pipe. Done at Mussan Motorsport, you can search for them on their Facebook page.
Thank You , found it :D
HI @thesighbored am particularly interested in this bike! Would like to know does the Malaysia version have it with ABS or not? Thumb up to the video!
Thanks for viewing! In Malaysia only the non ABS version available.
+TheSighBored really? that's a bit upsetting. if not it would be one of the best 650cc bike. s1000rr 80k used worth it?
It's worth it, depending on the condition of the bike and what accessories it has.
super Super Nice, ,,,,,
bisa jd pelajaran tuh
Please do a review of ktm RC 390 2017 version
Badal Singh bad bad idea...
good
Is your shop at Kuala Lumpur? do you know any best place to customize your bike in Penang? :/
This is not my shop, the shop is located in Sunway. Sorry I don't know any place in Penang to customize bike.
hey!can you suggest which exhaust is the best for cb500f?
I don't know which is the best, depend on what you want, maybe Akrapovic? Although it is not really loud. If you want loud, go for other brands.
Coffmans shorty... for sure!
Good
Is the cat removed when u remove this section
Yup. 0:38 is the catalytic converter, it's removed.
This R55 was specific to another motorcycle??? If so which one? I enjoyed by a Hornet
Nope, this is a generic/universal R-55 model.
It is possible to say an specification reference ?
If you have a look at their website you can see the mufflers R-55 looks the same for different models, just depends which one you want.
www.yoshimura-rd.com/pc_combined_results.asp?tab=product&search_prod=((searchlike~p.sku~R-55|Or|searchlike~p.nm~R-55|Or|searchlike~p.ds~R-55)|Or|searchlike~p.search_terms~R-55)&search_keyword=R-55
ok... thanks