Love the wera kit. It’s my favorite as well. Their attention to detail is off the charts. Like the knurling on the sockets and how everything is so accessible.
I have that Tekton micro bit set as well. Never owned a better cheapo kit in my life. The bits are cut really well. I just wish they'd have made a better spot in the case for the nut drivers.
You were mentioning the micro wrenches. I have metric and snap on micro wrench sets. They were not that expensive in the early 90s but wow they are now. The Box end is six point the fit and finish is excellent but wow are they costly. You also mentioned some kind of sacrilege about having too many bit sets and I was like " no"!
The wera sets are my go to. I also have the wera zyklops “nut driver” set I keep with it that has two 1/4 ratchets and different extensions and accessories.
Nice looking bit kit, hang it right in a hutch..Used ignition wrenches in my early years , did a fair share of points ..got the old craftsman sets..they haven't seen a whole lot of use but glad I have them..Thanks Buddy 👍
Awesome video brother. Man those are some really nifty tools a breaker bar extension. Thanks for sharing. Keep the content coming. Hope you have an incredible night. Much love bro
I have that gearwrench set been using it for a few years was just in the garage using it today. I had some tight spots to get to and its just bad ass for that
I just had my barn burn down with every tool I own. 25 years of good tool truck tools and insurance screwed me bad. I am replacing to get back to work with mostly cheaper thanks for the video buddy I am definitely going with some DURATECH about all I can afford but so much at one time.
China was able to make some of the best AK-47s in the world, along with their SKS rifles they produced. It just depends on how much they care about what they are doing.
For a while now in the EDC knife community, China has really stepped up their game in terms of quality, fit and finish at good prices. Naturally, I still prefer to support my country first. But I appreciate quality and integrity of manufacturing from wherever the origin. But overall, I think you and I agree that after US, Germany/Japan are a close tie, followed by Taiwan as a solid4th. But of course, that also depends on the tool itself, the make, personal preference of feel, etc. Thanks for another great vid.
I was in manufacturing over 40 years & in the last 20 years I watched as America has fallen to last place in the Selling & Purchasing of Manufacturing Equipment on the Global Market. China, India, Korea & Vietnam have taken the Manufacturing Market over. Countries purchasing the newest state of the art manufacturing equipment will produce the Superior products.
@@CPthetooladdict China produces our designs, same with Taiwan. It is beneficial for us. The quality different between foreign and domestic products is very much there. If China gets better at making a quality product it will only get better for us here in the us as they will not charge more. They don't have the proper labor laws as it is a communist government. It is sad, but the truth. Thinking anything else I believe is being naive.
What a badass idea
Good job CP I like your attitude about Great Star
Love the wera kit. It’s my favorite as well. Their attention to detail is off the charts. Like the knurling on the sockets and how everything is so accessible.
I have that Tekton micro bit set as well. Never owned a better cheapo kit in my life. The bits are cut really well. I just wish they'd have made a better spot in the case for the nut drivers.
Good Evening Fellow Toolhaulics 😊: CP, Thank you for another tool video sir, My best to you , Henry, & all of your subscribers. TMP from N.J.
Thanks, you too!
You were mentioning the micro wrenches. I have metric and snap on micro wrench sets. They were not that expensive in the early 90s but wow they are now. The Box end is six point the fit and finish is excellent but wow are they costly. You also mentioned some kind of sacrilege about having too many bit sets and I was like " no"!
The wera sets are my go to. I also have the wera zyklops “nut driver” set I keep with it that has two 1/4 ratchets and different extensions and accessories.
That wera kit is awesome
Nice looking bit kit, hang it right in a hutch..Used ignition wrenches in my early years , did a fair share of points ..got the old craftsman sets..they haven't seen a whole lot of use but glad I have them..Thanks Buddy 👍
Thanks for the info
Awesome video brother. Man those are some really nifty tools a breaker bar extension. Thanks for sharing. Keep the content coming. Hope you have an incredible night. Much love bro
Thanks 👍
I can't wait to snatch the 77 piece mac rbrt set. Sucks that you have to call in for that.
I dig the look and satin finish on that second Duratech bit ratchet.
I love the gear wrench set I put one in my road box there was so many tight spots I could get it into with it Happy New year CP 👍👍
Thanks, you too!
I use a 2” ratchet when the tough gets going. I like those Michael Pro tools.
I like the breaker extension 👍 Thanks for sharing with us
Thanks for watching!
I got the duratech bit driver set. I've only used it twice once on my knife and once on an hvac job. Well worth the measley 20 bucks I paid for it
S2 is only good if the heat treat is good, pretty nice looking set though
Yeah I agree
Got a set of Duratech ratcheting flex head wrenches, reach for the 1/2 - 9/16 a LOT now!
I have that gearwrench set been using it for a few years was just in the garage using it today. I had some tight spots to get to and its just bad ass for that
I just had my barn burn down with every tool I own. 25 years of good tool truck tools and insurance screwed me bad. I am replacing to get back to work with mostly cheaper thanks for the video buddy I am definitely going with some DURATECH about all I can afford but so much at one time.
Me use big club! Me smash with BIG BRAKER BAR! Me break studs off!
Good job cp. You are right as always.
I appreciate it
I got the full size metric wrench set from duratec love them
China was able to make some of the best AK-47s in the world, along with their SKS rifles they produced. It just depends on how much they care about what they are doing.
That's a good call!
I am pretty sure I remember you pointing out the end of the breaker bars 🤔
For a while now in the EDC knife community, China has really stepped up their game in terms of quality, fit and finish at good prices. Naturally, I still prefer to support my country first. But I appreciate quality and integrity of manufacturing from wherever the origin. But overall, I think you and I agree that after US, Germany/Japan are a close tie, followed by Taiwan as a solid4th. But of course, that also depends on the tool itself, the make, personal preference of feel, etc. Thanks for another great vid.
we have been trying to get a Jdtco bit set not having luck yet
That new vessel set looks like a amazing set!
Those drive end breaker bars turn another breaker bar into a very comfortable cheater pipe
Need videos every day or I get the shakes 😂
Working on it
thank you Sir
Most welcome
Yes I have tools I only use and and loaner ones
Absolutely 💯
I have duralast min racheting wrenches my wife got me one time. They are nice but they skipped some needed sizes
They skipped 11/32 on the micro wrenches lol just being a smart ass I think I’ve used that size once in my life.
@Not me back in my day it was commonly used on starters , the small wire..
@@gilmansgarage6341 I used one on a push start button lol
I'll keep the 20 dollars. Over those wrenches.
It's not for everyone that's for sure.
I was in manufacturing over 40 years & in the last 20 years I watched as America has fallen to last place in the Selling & Purchasing of Manufacturing Equipment on the Global Market. China, India, Korea & Vietnam have taken the Manufacturing Market over. Countries purchasing the newest state of the art manufacturing equipment will produce the Superior products.
CHINA‼️📣
China is capable of manufacturing whatever you're willing to pay for. India, I don't know...
its a shame but you are 100% correct china took us to school.
It's true we are failing
@@CPthetooladdict China produces our designs, same with Taiwan. It is beneficial for us. The quality different between foreign and domestic products is very much there. If China gets better at making a quality product it will only get better for us here in the us as they will not charge more. They don't have the proper labor laws as it is a communist government. It is sad, but the truth. Thinking anything else I believe is being naive.
@@alex1721 very true