Fixing a Yamaha wolverine...
Вставка
- Опубліковано 21 тра 2020
- In this video we work on this yamaha wolverine and try to figure out why its running bad. We do the basics first, check air filter, clean carb, change spark plug. Then we check switches to see if they are bad. Find that one switch is bad and unplugged it. And the quad running good again. Hope this video can help someone out and thanks for watching.
- Розваги
Yep! this is the problem I had with my 99. Your video helped me out. I wouldn't have tried to unplug the switch til I seen this video.
I'm glad my video was able to help you out. That's my goal with the videos for entertainment and to be helpful.
Merci beaucoup grâce à toi tu as dépanné mon quad. 👍
I just went and bought a new carb to end up having the same problem. I'm going to go do the very same thing and pray it fixes the problem. Great video n thanks for the tip.
Thank you and hope you get it fixed.
i have a 2002 yamaha 350 wolverine and yeah the rope kicks back hard!. also we had troubles with our carb so we switched to a warrior carb and it does better then the dumb diaphragm ones
If you try and run it with the parking brake set, it'll do this. Just release the parking brake, and you're good to go...
This was my problem, I appreciate you.
Good video
nice job
I'm In the Wellsville area and just noticed the Warrior you mention in the video is the same one on Market Place
It's not my warrior, lol. I still got her and won't get rid of it. Was a good friend's quad that unfortunately passed away and was lucky enough to get it.
Thanks for the info. Had the exact problem and unplugging the connector fixed it! Do you know what the switch is for?
Sweet video
Thank you I appreciate it.
Hey do you know how to fix a problem on these carbs?. I give it full throttle and its rideable but the slide doesn't move. It's vacuum operated and do you how to fix it
Just picked one up.
Having some issues on mine as well, I have eliminated the parking brake as the issue, the engine will rev high under minimal load, but not when under a load. I think the main jet isn't opening like it should and was wondering if you knew of a good rebuild kit for the carb?
If you wanted to save a few bucks, you could run a piece of wire through the jets to make sure they are opened. But if you want a rebuild kit. The ones I like to use is outlaw racing and tusk.
@@scrgarage1530 Thanks, I took apart the carb apart and the jets are all clear. I suspect the upper diaphram isn't air tight and its not allowing the needle to lift to open the jet. I ran it today without a filter to see if the Needle/gate would lift when reved but it didnt.
Make sure your vacuum slide is working properly. I had mine not seal properly when I rebuilt it.
Same issue that mine had, mine is identical, color and all.
How much to fix mine Where are you located?
Do you have any videos on how to fix the parking brake?
I do not, sorry.
what issue are you having?
would you make a video about the carb? how to clean it.
Yeah I can. Might have it in this Sundays video.
Did that video ever make it out
Sounds like the e brake sensor :Edit it was the e brake sensor
yeah
That exhaust also has no bafle in it
ebrake choke disconnect...
What year is this???
Do believe it's a 2001.
disconnect parking brake switch
Why my lights want cut on
Do they want to cut out while driving? If so the bulb could be bad or you could have a bad connection or fuse.