You’re one of the very few that have posted a video like this! Thank you!! I just dropped off my 2022 MT-10 for an ECU Flash and to have the shop install the link pipe! She has 909 miles on her almost broken in so I can enjoy her to the limit of my ability!
Thanks I tried my best to help the community. The videos takes me a lot longer to do the job too sometimes take 2 or 3 takes because I had to do things in advance first. Thanks for your compliment and good to know it helped you. This is why I do these things.
Exciting. I wish I can spend the $$$$ on the leo Vince and SC Project exhaust but I got my link pipe and can for $300 total so can't complain. It's loud and makes the bike run rich. I will film the pops and flames one of these days when down shifting it's amazing.
Hey mate, im in sydney thinking of doing the exact same mod, How many ks you done on bike simce doing this ? Have you had any problems i should look out for, picked up my 2022 mt last week Cool chanel too
Somebody probably already mentioned it but make sure you have that ecu flashed accordingly. They run extremely lean when you get them breathing properly with an exhaust.
@@ryanmurray9017 When a brand-new exhaust or link pipe is installed, they always shoot out flames. I think there is some kind of chemical coating inside that needs to be burned off.
Several months in and I'm still getting a lot of pops and flames. I get complaints from my biker mates when they ride behind me it smell of fuel so definitely not running lean.
Excellent vid mate! Well done. Guessing you're from Aus? What city? any issue with not running a Cat on ya bike? (im kinda stressed about that but really wanna hear that engine!
I'm in Perth, WA. No issues running no cat and can with Mr Plod. It's loud, but not as loud as SC Project. It also has healthy amount of pops and flames on down shift.
You'll still hear the engine, but once you're going 110kmph or above 😉 you'll just hear the exhaust and wind noise. I got a HJC RPHA11 RPHA10 helmets and they're noisy helmets.
@Litehamer yes! In black just like I wanted. So far, I've only swapped out the silencer for a Radiant GP shorty exhaust and left the breadbox as is. Sounds pretty good for only 60 bucks spent, and no tune needed.
@@RaidenXXII I would highly recommend that you still get a tune or at least an ECU flash. You may not feel any difference or flat spots but 9 times out of 10 a decat/link pipe will dramatically change the air/fuel ratio.
How is your bike running without an ECU flash? I’m concerned about mine and don’t know if I want to risk something going wrong. How’re things looking for you??
It's still running rich. I don't have a plan to flash the ecu as it will cost another $1000. In fact my fuel consumption dropped from 9.4L/100km to about 8.4L/100km in Mode A and I don't baby it. If I am babying it or taking it easy in Mode C I get 5.4L/100km. There are some pop when I'm decelerating and when I'm ridding it hard flames will come out of it.
www.ebay.com.au/itm/162502723806 Like mentioned I bought this from a mate who got it from this ebay store. The brand is Musarri. It is now back in stock for $200 AUD. Best value and he can ship oversea too.
www.ebay.com.au/itm/162502723806 Like mentioned I bought this from a mate who got it from this ebay store. The brand is Musarri. It is now back in stock for $200 AUD. Best value and he can ship oversea too.
@@motorcyclemichael2182 AU $32.76 25%OFF | 2pcs/lot Motorcycle Rearview Mirrors CNC Motorcycle Bar End Black Rearview Side Mirror For Triumph Speed Triple Accessories a.aliexpress.com/_mKE3PMC
www.ebay.com.au/itm/162502723806 Like mentioned I bought this from a mate who got it from this ebay store. The brand is Musarri. It is now back in stock for $200 AUD. Best value and he can ship oversea too.
www.ebay.com.au/itm/162502723806 Like mentioned I bought this from a mate who got it from this ebay store. The brand is Musarri. It is now back in stock for $200 AUD. Best value and he can ship oversea too.
You’re one of the very few that have posted a video like this! Thank you!! I just dropped off my 2022 MT-10 for an ECU Flash and to have the shop install the link pipe! She has 909 miles on her almost broken in so I can enjoy her to the limit of my ability!
Thanks I tried my best to help the community. The videos takes me a lot longer to do the job too sometimes take 2 or 3 takes because I had to do things in advance first.
Thanks for your compliment and good to know it helped you. This is why I do these things.
Where are you getting it flashed?
@@xdrive8860 I don't know yet. I'm getting silly quotes of $1000 for dyno custom tune.
Excellent video, thanks for your help!
I'm about to install a Leo Vince mid-pipe to my 2022 mt10. Your video is very helpful, thanks
Exciting. I wish I can spend the $$$$ on the leo Vince and SC Project exhaust but I got my link pipe and can for $300 total so can't complain. It's loud and makes the bike run rich. I will film the pops and flames one of these days when down shifting it's amazing.
Absolutely brilliant video please keep it up.
This is a great video. Helped me a lot. Thanks for doing it.
Anytime my purpose is fulfilled if it helped someone.
Thank you, I was stuck on how to fit the gasket 😊
Thanks for the 2nd gen info bud! Much appreciated
Your videos are excellent 👍🏽 keep up the great work
Thanks for watching. I hope to make more videos on the near future. You made my day. ❤️
Nice video are you still riding your bike like this with no tune? I just bought a 23 MT 10 and I would like to do the same to mine
Перед запуском забыли очистить трубу от отпечатков пальцев. Теперь они с вами навсегда)
Hey mate, im in sydney thinking of doing the exact same mod,
How many ks you done on bike simce doing this ?
Have you had any problems i should look out for, picked up my 2022 mt last week
Cool chanel too
Somebody probably already mentioned it but make sure you have that ecu flashed accordingly. They run extremely lean when you get them breathing properly with an exhaust.
If it's lean, how do you explain the flames out the exhaust?
I'm sure it's fine......just send it like it is😅🤣😂
@@ryanmurray9017 When a brand-new exhaust or link pipe is installed, they always shoot out flames. I think there is some kind of chemical coating inside that needs to be burned off.
Several months in and I'm still getting a lot of pops and flames. I get complaints from my biker mates when they ride behind me it smell of fuel so definitely not running lean.
Excellent vid mate! Well done.
Guessing you're from Aus? What city? any issue with not running a Cat on ya bike? (im kinda stressed about that but really wanna hear that engine!
I'm in Perth, WA. No issues running no cat and can with Mr Plod. It's loud, but not as loud as SC Project. It also has healthy amount of pops and flames on down shift.
You'll still hear the engine, but once you're going 110kmph or above 😉 you'll just hear the exhaust and wind noise. I got a HJC RPHA11 RPHA10 helmets and they're noisy helmets.
Cheers for the info mate.
Very helpful video!
Great video! No ECU flash required? Do you lose any bottom/mid torque?
Thanks. No I didn't loose and low to mids. It still got planty of power. After about 3000km the quickshifter go smoother.
@@RaidenXXII No ECU flash required?
@@scottwang16 ecu flash isn't required but if you want extra power and remove the throttle restriction you should ecu flash it.
@@scottwang16 ECU Flash is absolutely required after doing a decat on these bikes they will run way too lean and end up damaging your motor.
@@xdrive8860 Good to know, thanks!
Did you need to use exhaust gaskets or was a snug fit
What an insane improvement! I assume you had to get a tune after this right?
No I didn't get a tune. It didn't suffer from low to mid flat spot like in Gen 1 does after the link pipe upgrade.
@@RaidenXXII that's surprising after a whole decat! Thanks for the reply, I'm buying one in black this week. Love yamaha
@@corbinroberts949 did you get one ?
@Litehamer yes! In black just like I wanted. So far, I've only swapped out the silencer for a Radiant GP shorty exhaust and left the breadbox as is. Sounds pretty good for only 60 bucks spent, and no tune needed.
@@RaidenXXII I would highly recommend that you still get a tune or at least an ECU flash. You may not feel any difference or flat spots but 9 times out of 10 a decat/link pipe will dramatically change the air/fuel ratio.
How is your bike running without an ECU flash? I’m concerned about mine and don’t know if I want to risk something going wrong. How’re things looking for you??
It's still running rich. I don't have a plan to flash the ecu as it will cost another $1000.
In fact my fuel consumption dropped from 9.4L/100km to about 8.4L/100km in Mode A and I don't baby it.
If I am babying it or taking it easy in Mode C I get 5.4L/100km.
There are some pop when I'm decelerating and when I'm ridding it hard flames will come out of it.
How do you know its running rich .. bikes are lean from dealer .....
Did you do anything to your headers or did they go that blue from just riding?i pick up my bike next week and they look pretty shitty atm
They just went blue from normal ridding. I haven't touched the headers. I do ride it hard maybe heat turned it blue.
Is ECU flashed required?
It is if you want your bike running in good conditions.
You can tune it to get more power and stop the pops and flames and remove the 80% restriction but I still haven't tuned it.
Bom, se um dia eu tiver uma nave dessa já sei trocar o escapamento 😂
well done! 5/5 👌 what model link pipe that is and where i can buy it ?
foundt it already 🙂
@@karis.1845 where did you find it?
www.ebay.com.au/itm/162502723806
Like mentioned I bought this from a mate who got it from this ebay store.
The brand is Musarri. It is now back in stock for $200 AUD. Best value and he can ship oversea too.
Hi buddy . What mirrors are you using ??
See my other video on barend mirrors.
hi! you know if is the same delete cat of the model 2019 ? is compatible?
It is the same link pipe as the 2019 MT10 which is Gen 1. It does fit but you will need to force up the muffler by about 10mm up.
Ti segnala qualche errore rimuovendo i cavi della valvola di scarico?
No, I left the servo motor connected. You can get sero motor delete or flash the ecu with woodlich tune and turn it off.
Hey
Where did you order the link pipe ?
Look in my description. The ebay listings are provided.
Che marca è il porta targa? Link?
See my videos on Tail Tidy.
Not worth the price now 😏
Where are the bar end mirrors from?
www.ebay.com.au/itm/162502723806
Like mentioned I bought this from a mate who got it from this ebay store.
The brand is Musarri. It is now back in stock for $200 AUD. Best value and he can ship oversea too.
@@RaidenXXII that’s a better price 👍🏻
Now what about those bar end mirrors…which brand?
@@motorcyclemichael2182 AU $32.76 25%OFF | 2pcs/lot Motorcycle Rearview Mirrors CNC Motorcycle Bar End Black Rearview Side Mirror For Triumph Speed Triple Accessories
a.aliexpress.com/_mKE3PMC
What model is it?
www.ebay.com.au/itm/162502723806
Like mentioned I bought this from a mate who got it from this ebay store.
The brand is Musarri. It is now back in stock for $200 AUD. Best value and he can ship oversea too.
Link?
www.ebay.com.au/itm/162502723806
Like mentioned I bought this from a mate who got it from this ebay store.
The brand is Musarri. It is now back in stock for $200 AUD. Best value and he can ship oversea too.
Stock muffler sucks on a decat, couldn't stand it. 300 mm Black Widow muffler with link pipe made the decat sweeet
Can I mount without remapping?
Yes you can.