I like the idea, but i can't help thinking you need stronger springs, and probably ones that are shorter in general so you can draw back further and pack more power in the shot.
@@joshlower1 These limbs don't store energy so that would just increase the inertia of the system at no benefit. That inertia needs to be overcome using energy used to draw the bow and that energy should instead be used to accelerate the arrow.
Romans 10:9-10 ESV +---------+---------+ ⁹ because, if you confess with your mouth that Jesus is Lord and believe in your heart that God raised him from the dead, you will be saved. ¹⁰ For with the heart one believes and is justified, and with the mouth one confesses and is saved. CONCLUSION: See how the LORD wants you dearly to be saved, if You just confess with your mouth that (Jesus is LORD) and you truly believe in your heart that GOD the Father rose him up three days later from the dead, you will be saved, for you are Justified because you believe that Jesus Christ was Risen by GOD the Father and you are saved from confessing that He is LORD, so why deny it, why doubt in your heart?
Put the springs on the outside of the bow, all the way to the ends of the outer arms. Half-extend them before stringing. You'll get a longer draw and more power, with a tighter resting position. Just make sure to use decent springs because otherwise they'll just end up set as they are and lose power. Needs high-elasticity material.
Romans 10:9-10 ESV +---------+---------+ ⁹ because, if you confess with your mouth that Jesus is Lord and believe in your heart that God raised him from the dead, you will be saved. ¹⁰ For with the heart one believes and is justified, and with the mouth one confesses and is saved. CONCLUSION: See how the LORD wants you dearly to be saved, if You just confess with your mouth that (Jesus is LORD) and you truly believe in your heart that GOD the Father rose him up three days later from the dead, you will be saved, for you are Justified because you believe that Jesus Christ was Risen by GOD the Father and you are saved from confessing that He is LORD, so why deny it, why doubt in your heart?
@@Neopolitan_Illusion For the bow to release and allow the arrow to travel a good amount of distance, there needs to be a mechanism on the bow itself that allows it to stretch or flex. Here, a spring is used for tension. Normal bows without springs have a compliant mechanism meaning that the structure itself allows it to flex, which grants the string more tension to release the arrow. This metal bow would not be able to flex without the springs since the structure of the bow does not allow it to bend, due to the fact that the metal parts of the bike wheel are joined together with screws.
Romans 10:9-10 ESV +---------+---------+ ⁹ because, if you confess with your mouth that Jesus is Lord and believe in your heart that God raised him from the dead, you will be saved. ¹⁰ For with the heart one believes and is justified, and with the mouth one confesses and is saved. CONCLUSION: See how the LORD wants you dearly to be saved, if You just confess with your mouth that (Jesus is LORD) and you truly believe in your heart that GOD the Father rose him up three days later from the dead, you will be saved, for you are Justified because you believe that Jesus Christ was Risen by GOD the Father and you are saved from confessing that He is LORD, so why deny it, why doubt in your heart?
Romans 10:9-10 ESV +---------+---------+ ⁹ because, if you confess with your mouth that Jesus is Lord and believe in your heart that God raised him from the dead, you will be saved. ¹⁰ For with the heart one believes and is justified, and with the mouth one confesses and is saved. CONCLUSION: See how the LORD wants you dearly to be saved, if You just confess with your mouth that (Jesus is LORD) and you truly believe in your heart that GOD the Father rose him up three days later from the dead, you will be saved, for you are Justified because you believe that Jesus Christ was Risen by GOD the Father and you are saved from confessing that He is LORD, so why deny it, why doubt in your heart?
Not a replacement for an actual bow, but a cool idea. Very innovative. Neat to look at. Long term durability, noise when shooting, and repair in the field would be problems. Ingenious though.
Интересная игрушка для ребенка, помню как в детстве делал лук из орешника, он бил прицельно от силы метров на 20, вот бы в мое детство посмотреть ваш ролик...
@@АлексейОзеров-й4й да похуй, для баловства ребёнка и обычной измерительной ленты хватит. Вам тут не надо соблюдать идеальные геометрические показатели, упругость метала и жёсткость пружины. Из такого говна путний лук не сделать. Из него даже стрельба по правильной технике не возможна. А баловаться ребёнку и такой пойдёт)
@@АлексейОзеров-й4й характеристики пружин😁😁😁 видно же что херня получилась. если б он эти пружины для разгибания лука поставил+ норм тетиву+ направляшку для стрелы ой короче все переделывать за ним
So, a hardware store components toy shaped like a bow. Using modern electric tools, prefabbed aluminum, nuts+bolts and store bought springs you "created" a "bow" that can barely withstand 10lbs of pulling force with no sights and proven inability pierce a thin plastic bottle at 5 ft using a store bought modern arrow. 5000 years ago, craftsman could make a 10x stouter bow that could pierce woolly rhino skulls at 80 yards created using basic wood carving hand tools and actual wood. 100 years ago John Moses Browning could make a 1911 semiauto out of a handmill. 80 years ago a crippled peasant created the symbolic AK using a pick and sheet metal. But today, this is what we are left with. I'd be impressed if u used simple tools to make something advanced and useful vs using advanced tools to make something that will break if u use it twice. Just sayin.
I think you may have missed the point that this design is simplistic and builds quickly. Yes plenty of improvements to be made design and material-wise. A hacksaw would have done the job of the angle grinder and it would have taken just a bit more time. You are making faulty comparisons of historical iconic inventions that required incredible amounts of time and know-how with this junk made weapon.
@@David-bc4rh you don't Understand the point. This design is made for a postapocslyptic scenario, where everything would be hard to find Imagine you have to tweak it, and it's breaks down in your hand, because it was too weak for a stronger spring
@@tacuska7 I don't see anything about the intent of the bow being for post alpacalisp, although i know from experience that springs, bike rims, and nuts and bolts are so ubiquitous I can't imagine them being difficult to scavenge from just about anywhere near a city or town or land fill.
Your draw length needs to be further back and it would be more accurate, more powerful, faster, and more comfortable. It’s essentially a compound bow with recurve attributes. It’s a fantastic idea and I’m only trying to give you advice. I make recurve bows and also bow hunt a lot.
Знаете, какие же люди странные: придумать идеальное оружие дальнего боя, основанное на простейшей физике, а потом, спустя несколько сотен лет, начать использовать его как дубинку. Не генально ли? Деградация взяла верх, или разум, вам решать, но "лук ближнего боя" я запомню навсегда.
Мы в детстве делали разные луки, проще всего было сделать из фибергласса, получалось очень даже круто и думаю много легче показанного, а за рабочий обод могли и уши оторвать)
Самый простой и надёжный в моём детстве (90-е) Вяз или дуб длиной 1,2-1,4 метра дед замачивал в соляном растворе на доске с приданием изначальной формы. Стрелы - болотная трава "черет" в наконечнике гвоздь 70 примерно, с конусной насадкой из простой консервной банки. Тетиву леской 1.0 делал, стрела реально на 300-400 метров улетала. Смотря на вышеопубликованное - Хочется автора послать на канал "Доктор Дью" - там похожих самоделок и лайфхаков преподносят пачками, хорошо, что с юмором. Радует, только то, что наше детство прошло без интернета!
@@vnuk32ru сомневаюсь что Матвеев возьмётся за такое, он больше по инструментам и рекламе DeWalt, о котором, кстати, он знает процентов на 30... Раз вы знаете про Матвеева, то предположу что в курсе о Дане Крастере. Вот у него в старых видосах был лук из скейтборда, по моему ещё из детских лыж тоже было (ну уверен), по моему ещё из кровати из Ikea делал... Короче, он делал несколько луков и последний из скейта был самый удачный. Посмотрите, если такая тема интересует, Даня там много чего про науку тоже ля-ля))
Nice idea! If I have to guess this is a 15 lbs draw fun bow not capable to shoot through a plastic water bottle. Stronger springs and the party would be on.
Мы в детстве делали "арбалеты" из велосипедных насосов... Всего-то нужен был насос,доска, трубка медная от трактора (для дула), гвоздь для курка, жгут и снаряды, мы использовали подшипник, но можно было использовать камушки или пластилин. Воробьёв на раз спать укладывал...
I was always curious about this design, this video answers my question, it looks cool, still classic bow more durable in long run (that springs will rust, make too much noise in hunting, need more power/effort to use etc) but seriously it looks badass, love to have a carbon-fiber version myself whit laser pointer just for LOL's.. Good Job !
when u hunt, u have just one shot! miss and your prey is gone! if the springs are painted or powder-coated springs, they might endure a lifetime! With such a bow you can also hunt fish... people always think u need to shoot 50-80 yards or more...
@@givemeanameman1 just use thicker spring like ones from frame of MTB. Plus don't put a string on it without tension ( I'd personally make arms still pivot but aided by spring since that would be far easier to string)
Cute. But your draw length is severely limited. Also, aluminum from a bike wheel might not give you a dependable draw weight...not the greatest material for extended use...not bad in a pinch though
Actually if he ran paracord along the reverse side of the bow tight, it would stop the bending of the aluminum and reinforce it... much how Greek trireme had a central tension rope that connected the bow and stern.
I agree, the pivot point wil probably colapse, especially if we're to increase the spring tension. I like the simple concept tho, leaves room for creative modification.
The aluminum limbs do not stretch. Until he added the springs all I could think is there is no way this would work. Using paracord show lack of knowledge of the materials used.
Very ingenious design! Though like many in the comments, I wonder about safety and durability due to the materials used. Paracord might also not be a very effective option. It does look very cool👉👉
@@misterkaos.357 I'm not sure. My best guess would be to use actual bow string but a bit thicker and longer to use in this setup. However I also understand the aim of this build is suppose to be a bit diy apocalypse style, where you make it work with materials available to you.
@@misterkaos.357 you still here? Modern bows like compounds that have the same concept as this spring bow uses synthetic materials like spectra or dyneema. If you don't have a archery store near you, find braided fishing line same material as the former. Preferably around 0.50mm or 0.021 in, should already be rated above 60lbs.
@@mocknugget "You still here?" Nigga, I've been here since the Nintendo 64 was first released in America. I am what the zoomers refer to as a "dinosaur." Anyway, you say I can make my own bowstring out of fishing line? Cool beans!
I love it, but I would worry about the draw noise scaring away your game. Also... I wouldn't expect to get 100 shots out of this. But what a great proof of concept!
И это предел - 20-25 метров дальность стрельбы с убойностью выстрела? А пружины? Со временем и пружины и верёвка растянется. Идея неплохая, а качество ниже минимума.
I see a large population of people who want to be ready and free. Good people w love in their hearts. At one time, they did tichi sets in the park, not sure they can do that starving in lok dn. Dude sure lives in the country.
Интересная идея для рамы. Лук на короткой дистанции мне понравился из колеса мопеда и резинки от рогатки. Компактное и рабочее приспособление. Автору спасибо за идею 👍
@@ShadeAKAhayate как было упомянуто выше в одном из англоязычных комментариев - это всего-лишь дряблая и некудышная копия одного другого мастера, то-есть, *плагиат* . От того и сделано всё на соплях и ради просмотров и лайков...
@@ahdid6105 you are correct,i just made a pattern.the power is determined by spring you pick.if you want it be more powerful,try shorter and bolder one with much more resilience.👍
We have all the springs from the last trampoline that the kids broke (the welds on the bars gave way after about 10 years exposed to the elements). Those are JUST the right size springs for this project...
Можно сделать все, что угодно из чего угодно. Вопрос в том, стоит ли заморачиваться и создавать уже созданное, причем без шансов превзойти его качеством.
@@ericsmith4513 depends on the make of the alloy, aluminum can be soft or as rigid/strong. All aluminum bicycle rims do have their breaking point from enough force. And any metal can fatigue. That's why most bike wheels get warped with enough damage. It's tough, but not indestructible. Over time, an aluminum bow will also give way - the question is "how long" before it breaks. Bows are made to a different set of standards/tolerances depending on the amount of draw weight it can do - and it's different for every user. A 70 pound draw weight would shorten the lifespan an DIY bow made out of an aluminum bicycle wheel considerably.
Идея не плохая. Но натяжка для взрослого человека очень слабая. Тетива сильно расслаблена и пружины можно взять покороче этих. Но если лук делался для ребёнка тогда пойму.
Прикольная конструкция, молодца ! Только , чтобы по деревьям пострелять, надо было по-дальше в лес уйти...пару дней пути и стреляй сколько хочешь ! не далеко ушел, короче...
Take a few new attempts at refining this concept ! You could actually be on to something in a post apocalyptic society where survival of the ingenious might become impairative ! While I might sound a bit sarcastic, I can assure you, I am quite serious ! What are you using for your springs ? What can we do to refine your pivot points ? I think it may help with quieting down your release ! What are you using for your drawstring ? And what could you possibly use in a survival situation, where you might not have access to a local sporting goods shop ! Spring selection is obviously going to be critical ! And static spring tension prior to your initial draw, will certainly assist with potential lethality ! What's the chances you might consider doing a second new, and improved version ? Seriously, you might be on to something, when you have to do with what you happen to have available, and not what you wish you had ! You definitely have my attention !
I think i prefer grow trees and make wood bows,, Plus im not skill n didn't have powertools,, Scrap metal use for arrow tip or forge KERIS. But anyway it's got nothing todo with the video,, The video is good, the guy is enjoying and inspiring others
Not trying to sound like “ that guy” but I did think of this back in 2007. Always thought it was a cool idea. This one looks good it’s sleek but I had a heavier design lol probably get tired of holding it.
The design looks pretty cool I'll give you that, but the pull makes it look like it would be useless at anything over 20'-30'. It just doesn't look strong enough, and swapping out the springs that are attached alone I don't think would do the job. Even 50lbs worth of pull would likely snap it where you made the cuts for the center piece to attach to the other two. The tubing you can see in the cross section would add to the strength, but not enough to handle any twists to the frame that are likely to come from somebody who only shoots left OR right-handed. It makes me want to see something like this done with some kind of a light duty leaf spring though. Maybe with a stronger material you could keep the same general shape, and include some counter springs on the front where the arms would pivot instead of being fixed to the center piece? One set of springs pulling the arms towards the handle, and another set of springs pulling the bowstring should strengthen the pull considerably, and if it was made out of a leaf spring then that would address the twist because then it can be spread through the layers.
Даже стесняюсь спросить: усиленная шайба + гравер под болтовое соединение не нужны? Через 80-100 реальных выстрелов у моей покойной бабушки костыль в лучшем состоянии остался. // Стальная труба диаметром 3/4" при такой же сборке с использованием станка для гибки труб и закалки после печи в масле усилит упругость конструкции минимум в 3 раза, а если ещё "дверные" пружины заменить - тогда реально годная вещь получится.
I like the idea, but i can't help thinking you need stronger springs, and probably ones that are shorter in general so you can draw back further and pack more power in the shot.
000099090009900p
Для улучшения лука вместо болтов нужно было ещё пружины поставить.
The actual arms need to be sorings themselves as well for a combine effect
@@joshlower1 These limbs don't store energy so that would just increase the inertia of the system at no benefit. That inertia needs to be overcome using energy used to draw the bow and that energy should instead be used to accelerate the arrow.
Romans 10:9-10 ESV
+---------+---------+
⁹ because, if you confess with your mouth that Jesus is Lord and believe in your heart that God raised him from the dead, you will be saved. ¹⁰ For with the heart one believes and is justified, and with the mouth one confesses and is saved.
CONCLUSION: See how the LORD wants you dearly to be saved, if You just confess with your mouth that (Jesus is LORD) and you truly believe in your heart that GOD the Father rose him up three days later from the dead, you will be saved, for you are Justified because you believe that Jesus Christ was Risen by GOD the Father and you are saved from confessing that He is LORD, so why deny it, why doubt in your heart?
Looks super effective on targets within 3 steps.😂
ya 4 pasos el arco no es efectivo 😂😂😂
I was thinking 🤔 that 2 seconds into the video 😆
Real talk😂
🤣🤣🤣🤣
Inspires me to make one though, you know: when fools be two steppin. Some good ideas but no 'wooshka' power...🙂
Put the springs on the outside of the bow, all the way to the ends of the outer arms. Half-extend them before stringing. You'll get a longer draw and more power, with a tighter resting position.
Just make sure to use decent springs because otherwise they'll just end up set as they are and lose power. Needs high-elasticity material.
Tight?😩
Romans 10:9-10 ESV
+---------+---------+
⁹ because, if you confess with your mouth that Jesus is Lord and believe in your heart that God raised him from the dead, you will be saved. ¹⁰ For with the heart one believes and is justified, and with the mouth one confesses and is saved.
CONCLUSION: See how the LORD wants you dearly to be saved, if You just confess with your mouth that (Jesus is LORD) and you truly believe in your heart that GOD the Father rose him up three days later from the dead, you will be saved, for you are Justified because you believe that Jesus Christ was Risen by GOD the Father and you are saved from confessing that He is LORD, so why deny it, why doubt in your heart?
@@JesusIsLORDbro3-3 you're a scammer...or a psycho.
@@JesusIsLORDbro3-3always a complete nut entering....
I think the bow would actually work when you use a shorter string and put the springs already in tension before you draw.
Why not remove the springs entirely?
@@Neopolitan_Illusion For the bow to release and allow the arrow to travel a good amount of distance, there needs to be a mechanism on the bow itself that allows it to stretch or flex. Here, a spring is used for tension. Normal bows without springs have a compliant mechanism meaning that the structure itself allows it to flex, which grants the string more tension to release the arrow.
This metal bow would not be able to flex without the springs since the structure of the bow does not allow it to bend, due to the fact that the metal parts of the bike wheel are joined together with screws.
@@jiseongkwon66 I'd be curious about a hybrid spring/cam design...
I agree shorter strain shorter more tense springs would be a more effective idea but for a starter bow quite effective
@@benjaminvarner3231 the cam would only increase the tension with a shorter draw length.
Шикарно! с 3-х шагов в дерево попал!
Знать бы с какого раза…
Стрелы экономит
Интересно,а с четырёх шагов попадёт?
🤣
Такой только на рыб охотиться можно в прозрачной воде.
This is cooler than the other side of the pillow. What an original concept!
For post apocalypse this video sure are goldmine.
😘☺️
*is a
А я всё ждал, что в конце покажет, как стрелы изготовлять.
Надо бы назвать: Как окончательно испортить велосипедное колеср.
Ха, прикольно! Не думал о подобном выборе материала для лука))
Отлично
Хрень получилась
Romans 10:9-10 ESV
+---------+---------+
⁹ because, if you confess with your mouth that Jesus is Lord and believe in your heart that God raised him from the dead, you will be saved. ¹⁰ For with the heart one believes and is justified, and with the mouth one confesses and is saved.
CONCLUSION: See how the LORD wants you dearly to be saved, if You just confess with your mouth that (Jesus is LORD) and you truly believe in your heart that GOD the Father rose him up three days later from the dead, you will be saved, for you are Justified because you believe that Jesus Christ was Risen by GOD the Father and you are saved from confessing that He is LORD, so why deny it, why doubt in your heart?
The intro was so peaceful.. I was not mentally prepared for that first angle-grinder cut lol
Romans 10:9-10 ESV
+---------+---------+
⁹ because, if you confess with your mouth that Jesus is Lord and believe in your heart that God raised him from the dead, you will be saved. ¹⁰ For with the heart one believes and is justified, and with the mouth one confesses and is saved.
CONCLUSION: See how the LORD wants you dearly to be saved, if You just confess with your mouth that (Jesus is LORD) and you truly believe in your heart that GOD the Father rose him up three days later from the dead, you will be saved, for you are Justified because you believe that Jesus Christ was Risen by GOD the Father and you are saved from confessing that He is LORD, so why deny it, why doubt in your heart?
@@JesusIsLORDbro3-3 You're Jesus
@@nikolaishriver7922 no.
Not a replacement for an actual bow, but a cool idea. Very innovative. Neat to look at.
Long term durability, noise when shooting, and repair in the field would be problems. Ingenious though.
Good assessment.
Ingenious but every aspect of it renders it ineffective? Strange assessment.
and weakness, i think this design barely holds 5lbs and if we talk about 20lbs(+) the rims probably would bend
but yes the design is cool
@@Wha73v3r fr i was like arent those aluminum? thing will be basically a toy
Интересная игрушка для ребенка, помню как в детстве делал лук из орешника, он бил прицельно от силы метров на 20, вот бы в мое детство посмотреть ваш ролик...
Ролик был-бы в разы ценнее, если-бы были даны рекомендуемые размеры для обеспечения оптимальной геометрии. Да и характеристики пружин не помешали бы.
@@АлексейОзеров-й4й да похуй, для баловства ребёнка и обычной измерительной ленты хватит. Вам тут не надо соблюдать идеальные геометрические показатели, упругость метала и жёсткость пружины. Из такого говна путний лук не сделать. Из него даже стрельба по правильной технике не возможна. А баловаться ребёнку и такой пойдёт)
@@Чрныйплащ-м2б баловаться ребёнку, леску на прут натяни и хватит, а не точить какую то дичь в гараже пол дня...)
@@goldden812 чем собственно мой батя и занялся в своë время) причëм прут искал по всей Черëмухе во дворе☝😎
@@АлексейОзеров-й4й характеристики пружин😁😁😁 видно же что херня получилась. если б он эти пружины для разгибания лука поставил+ норм тетиву+ направляшку для стрелы ой короче все переделывать за ним
So, a hardware store components toy shaped like a bow. Using modern electric tools, prefabbed aluminum, nuts+bolts and store bought springs you "created" a "bow" that can barely withstand 10lbs of pulling force with no sights and proven inability pierce a thin plastic bottle at 5 ft using a store bought modern arrow.
5000 years ago, craftsman could make a 10x stouter bow that could pierce woolly rhino skulls at 80 yards created using basic wood carving hand tools and actual wood.
100 years ago John Moses Browning could make a 1911 semiauto out of a handmill.
80 years ago a crippled peasant created the symbolic AK using a pick and sheet metal.
But today, this is what we are left with.
I'd be impressed if u used simple tools to make something advanced and useful vs using advanced tools to make something that will break if u use it twice. Just sayin.
Thank you, to writing this down so i don't have to.
I think you may have missed the point that this design is simplistic and builds quickly. Yes plenty of improvements to be made design and material-wise. A hacksaw would have done the job of the angle grinder and it would have taken just a bit more time.
You are making faulty comparisons of historical iconic inventions that required incredible amounts of time and know-how with this junk made weapon.
@@David-bc4rh you don't Understand the point.
This design is made for a postapocslyptic scenario, where everything would be hard to find
Imagine you have to tweak it, and it's breaks down in your hand, because it was too weak for a stronger spring
@@tacuska7 I don't see anything about the intent of the bow being for post alpacalisp, although i know from experience that springs, bike rims, and nuts and bolts are so ubiquitous I can't imagine them being difficult to scavenge from just about anywhere near a city or town or land fill.
Огонь. Ждём видео как сделать лук из хлебного мякиша, прессованного риса и волос жены!
🤣🤣🤣
Your draw length needs to be further back and it would be more accurate, more powerful, faster, and more comfortable.
It’s essentially a compound bow with recurve attributes. It’s a fantastic idea and I’m only trying to give you advice. I make recurve bows and also bow hunt a lot.
Круто, стрела с 2х метров в дерево воткнулась, можно и на охоту! Это самый лучший лук, ближнего боя.
Ага. А ещё лучше навершие прикрутить -- и, держа за противоположный конец...
Знаете, какие же люди странные: придумать идеальное оружие дальнего боя, основанное на простейшей физике, а потом, спустя несколько сотен лет, начать использовать его как дубинку. Не генально ли? Деградация взяла верх, или разум, вам решать, но "лук ближнего боя" я запомню навсегда.
На достигнутом не останавливайся.
Попробуй колесо от паровоза.
Точно, и вместо пружин можно использовать амортизаторы от трактора
@@КисаМарковна и стрелять ядерными ракетами
@@adama7869 вас могут за раскрытие гостайны привлечь!
🤣🤣🤣
Мы в детстве делали разные луки, проще всего было сделать из фибергласса, получалось очень даже круто и думаю много легче показанного, а за рабочий обод могли и уши оторвать)
Из Черёмухи хорошо шло метров на 50)
Из детских лыж, распиленных вдоль как-то отец делал нам...большой получился, как и полет стрелы.
Давным-давно Даня Крастер делал лук. Вернее он делал несколько луков - один точно был из скейтборда, по моему из детских лыж тоже было.)
Самый простой и надёжный в моём детстве (90-е) Вяз или дуб длиной 1,2-1,4 метра дед замачивал в соляном растворе на доске с приданием изначальной формы. Стрелы - болотная трава "черет" в наконечнике гвоздь 70 примерно, с конусной насадкой из простой консервной банки. Тетиву леской 1.0 делал, стрела реально на 300-400 метров улетала. Смотря на вышеопубликованное - Хочется автора послать на канал "Доктор Дью" - там похожих самоделок и лайфхаков преподносят пачками, хорошо, что с юмором. Радует, только то, что наше детство прошло без интернета!
@@vnuk32ru сомневаюсь что Матвеев возьмётся за такое, он больше по инструментам и рекламе DeWalt, о котором, кстати, он знает процентов на 30...
Раз вы знаете про Матвеева, то предположу что в курсе о Дане Крастере. Вот у него в старых видосах был лук из скейтборда, по моему ещё из детских лыж тоже было (ну уверен), по моему ещё из кровати из Ikea делал... Короче, он делал несколько луков и последний из скейта был самый удачный. Посмотрите, если такая тема интересует, Даня там много чего про науку тоже ля-ля))
once more, here I am watching someone else working their own projects while I don't work on mine because this is how I spend all my time
Feel u
Очень сомнительные стрелковые испытания)) Оружие получилось исключительно декоративное.
В зомбиаппокалипсис сойдет)) против рядовых зомби)
Это в начале игры, открываешь сундук , а там лук из колеса атака 2)))))))
@@Lute_Mars Ага, конечно.
@@GooDSmileBaby хахаха
Так ведь из говна и палок.
Nice idea! If I have to guess this is a 15 lbs draw fun bow not capable to shoot through a plastic water bottle. Stronger springs and the party would be on.
Мы в детстве делали "арбалеты" из велосипедных насосов... Всего-то нужен был насос,доска, трубка медная от трактора (для дула), гвоздь для курка, жгут и снаряды, мы использовали подшипник, но можно было использовать камушки или пластилин. Воробьёв на раз спать укладывал...
Живодëр что ли?
Как владелец лука скажу - на видео херня. Скорость стрелы никакущая, энергетика тоже. Направляющей для стрелы нет, хер попадёшь. Мусор, короче.
Абсолютно верно,это очень жесткий лук никакого натяжение,эластичность 0
Для детей нормальный лук. Красивый, стреляет. Детям мощный лук и не нужен.
Канал надо было назвать "Как можно выжить после зомби апокалипсиса?"))
I was always curious about this design, this video answers my question, it looks cool, still classic bow more durable in long run (that springs will rust, make too much noise in hunting, need more power/effort to use etc) but seriously it looks badass, love to have a carbon-fiber version myself whit laser pointer just for LOL's..
Good Job !
when u hunt, u have just one shot! miss and your prey is gone! if the springs are painted or powder-coated springs, they might endure a lifetime! With such a bow you can also hunt fish... people always think u need to shoot 50-80 yards or more...
If the springs were thicker and kept under tension they wouldn't make much noise at all(you would need string silences like any string)
@@givemeanameman1 just use thicker spring like ones from frame of MTB. Plus don't put a string on it without tension ( I'd personally make arms still pivot but aided by spring since that would be far easier to string)
If the limbs bent and released energy too instead of pivoting, and the springs were enclosed, it would be much better
This is no hunting bow. Lol. No way in hell this has the draw weight needed to take something down.
This will be good for when the Road Warrior movie becomes real life.
Cute. But your draw length is severely limited. Also, aluminum from a bike wheel might not give you a dependable draw weight...not the greatest material for extended use...not bad in a pinch though
Actually if he ran paracord along the reverse side of the bow tight, it would stop the bending of the aluminum and reinforce it... much how Greek trireme had a central tension rope that connected the bow and stern.
@@givemeanameman1 meh...maybe it would help a bit, but once you apply any force beyond the UTS of that particular material it will permanently deform.
That's because its not depending on the bike piece at all for the draw weight. Only the spring.
Cool now I know how to make a bow for the post-apocalypse world!
Вместо пружин надо было использовать резинку, желательно от семейников.
А так, чисто для баловства, прикольно сделать ребёнку.
Good vid. Seems like something out of those Sci-Fi movies and thriller/horror movies I usually watch.
I would fear the limbs will break.Aluminum over stretched is questionable.
It's elastic limit likely isn't even approached with this bow and with the assist offered by the springs I imagine it is safe
I agree, the pivot point wil probably colapse, especially if we're to increase the spring tension. I like the simple concept tho, leaves room for creative modification.
The aluminum limbs do not stretch. Until he added the springs all I could think is there is no way this would work. Using paracord show lack of knowledge of the materials used.
If you needed a weapon for hunting, it'd work smh
It's springs vs metal fatigue
Next video: "How to make a fighter jet with bicycle wheels" Lol jk, amazing content tho💯🙌🔥
Very ingenious design! Though like many in the comments, I wonder about safety and durability due to the materials used. Paracord might also not be a very effective option. It does look very cool👉👉
Remind me again, what kind of cording is considered "archery-grade?" I'm more of a firearms kind of guy.
@@misterkaos.357 I'm not sure. My best guess would be to use actual bow string but a bit thicker and longer to use in this setup. However I also understand the aim of this build is suppose to be a bit diy apocalypse style, where you make it work with materials available to you.
@@MobTheGlitch Suppose I went to the hardware store to look for cord. What sort of material and gauge should I be looking for?
@@misterkaos.357 you still here? Modern bows like compounds that have the same concept as this spring bow uses synthetic materials like spectra or dyneema. If you don't have a archery store near you, find braided fishing line same material as the former. Preferably around 0.50mm or 0.021 in, should already be rated above 60lbs.
@@mocknugget
"You still here?"
Nigga, I've been here since the Nintendo 64 was first released in America. I am what the zoomers refer to as a "dinosaur."
Anyway, you say I can make my own bowstring out of fishing line? Cool beans!
I've seen this video a couple of times now ... might as well sub. Subbed. Thumbs up .
Whaaaaaaaat. That was so easy it looks great I'm going to try one when I find a bicycle wheel thank you
”When I find a bicycle wheel” 🤣 Don’t know why but that really cracked me up for some reason.
Ah, the grinder! My favorite tool!
I love it, but I would worry about the draw noise scaring away your game.
Also... I wouldn't expect to get 100 shots out of this. But what a great proof of concept!
Give this guy a bicyle, he will create an entire arsenal
The problem with those types of springs is that they deliver less power the more contracted they get.
I give him credit for just looking at a bicycle wheel and saying.... You know what, I could make a bow out of this !!!
Народ, вот почему у нас в Казахстане идет в ютюбе преступная мошенническая рекламма про инвистиции. Или мошенничество у нас узаконили?
A few questions.
- integrity of the bow given the spoke holes. Do these require reinforcements
- weight and gauge of the springs
- length of bowstring
Seems like you have never made bows and arrows in your childhood, kids thesedays
@@tejindersidhu2630 top 10 people who love to insult others asking questions
재미있는 아이디어네요~ ^^
살아있는 나무에 활을 쏘는것 보다는 판자에 쏘는 시범을 보여주었다면 더 좋았을거 같아요.
Brilliant.
Straight out of the A Team.
И это предел - 20-25 метров дальность стрельбы с убойностью выстрела? А пружины? Со временем и пружины и верёвка растянется.
Идея неплохая, а качество ниже минимума.
I see a large population of people who want to be ready and free. Good people w love in their hearts. At one time, they did tichi sets in the park, not sure they can do that starving in lok dn. Dude sure lives in the country.
Интересная идея для рамы. Лук на короткой дистанции мне понравился из колеса мопеда и резинки от рогатки.
Компактное и рабочее приспособление.
Автору спасибо за идею 👍
Там же всё максимально хлипкое. Не удержит нормальную конструкцию и нормальное натяжение.
@@ShadeAKAhayate как было упомянуто выше в одном из англоязычных комментариев - это всего-лишь дряблая и некудышная копия одного другого мастера, то-есть, *плагиат* . От того и сделано всё на соплях и ради просмотров и лайков...
Мне кажется изза разной силы натяжения пружин его будет уводить, то вверх, то вниз.
Это же ведь фигня на китайских, и Украинских, и, американских, соплях, Фуууууууууууууууууууууууууууууууууу, тухлая фигня
😂😂😂@@metkiyspider9849
For this amount of work I’d make a laminated bow out of the pallet that’s probably sitting in an alley behind this guys workshop
Выглядит практично и интересно. Отличная идея лука
☺️
Для ближней дистанции, очень ближней, самой ближней.
Wow, he's really fast with those screws!
Хорошая идея ! Есть куда развивать.
Ага, обод мотоцикла и можно балисту замутить)))для ценителей создавать видимость работы)
Eres Iñigo Errejon??
Nice tool to hunt at 2 meters' range.
😅
@@WildCraftsman I think you should use a shorter spring and tighten the string more. Thanks for the video. It is interesting. 🙂
@@ahdid6105 you are correct,i just made a pattern.the power is determined by spring you pick.if you want it be more powerful,try shorter and bolder one with much more resilience.👍
He's Asian. I think you're expecting a bit much to see him draw a 60 lbs bow.
@@thomasolson7447 I thought that racism ended. Obviously, I am wrong.
We have all the springs from the last trampoline that the kids broke (the welds on the bars gave way after about 10 years exposed to the elements). Those are JUST the right size springs for this project...
Это хорошая вещь против близоруких бандитов
Hell that beats all Wild Craftman gonna chop up my bicycle wheel and do it
Если убъет летучую мышь, то пусть не ест
😆👍
А если кабана?😁
@@dmitrijdenisov8882 ковид от мышей пошёл вроде, кабанов пусть ест))))))
@@kreator2646 а свинной грипп от кого пошел?
shame your self
做的好厲害！只不過弦以及弓身之間的彈性有可能需要更融合，這樣射程更遠，殺傷力更大一些. 拉空弦之時，聽說不可以直接放開，要不然彈簧會受損!
g五步
сделать более универсальное крепление дуг, дабы их можно было складывать для транспортировки, да увеличить натяжение.
Cool build! I just think it needs stronger springs and a tighter string
Хм… мне кажется алюминиевый сплав обода не очень подходит для таких нагрузок, даже с использованием пружин. Быстро треснет
Там пружины детские он их с легкостью натягивает
Можно сделать все, что угодно из чего угодно. Вопрос в том, стоит ли заморачиваться и создавать уже созданное, причем без шансов превзойти его качеством.
Уважаемый мастер, спасибо, было очень познавательно, в плане саморазвития.👍
Would love to see you hunt with it! Love the diversity of the comments! I Love You World! Wish we could all be one!
That's probably only good for a few shots as the durability is questionable, nice build though.
I too would like to know the longevity of this bow
Oh yeah 😎. Soft aluminum wheel rim?
@@ericsmith4513 depends on the make of the alloy, aluminum can be soft or as rigid/strong. All aluminum bicycle rims do have their breaking point from enough force. And any metal can fatigue. That's why most bike wheels get warped with enough damage. It's tough, but not indestructible. Over time, an aluminum bow will also give way - the question is "how long" before it breaks. Bows are made to a different set of standards/tolerances depending on the amount of draw weight it can do - and it's different for every user. A 70 pound draw weight would shorten the lifespan an DIY bow made out of an aluminum bicycle wheel considerably.
It was capable enough to support the entire body weight of a fully grown large adult
역시 한국의 각궁이 세계 최고임을 다시 한번 느끼게 하는 영상입니다
Идея не плохая. Но натяжка для взрослого человека очень слабая. Тетива сильно расслаблена и пружины можно взять покороче этих.
Но если лук делался для ребёнка тогда пойму.
The next post apocalyptic survival game needs this bow in it
Конструктивно нужны доработки, идея приемлимая
Please explain. Thank you on advance.
Genius ^^
Огромное спасибо очень круто и всё ясно показано спасибо💥💥💥💥💥💥🔥🔥🔥🔥🔥👍
This guy would survive in a zombie apocalypse
Excelente! 🏹
Нет ничего лучше для лука и арбалета, чем рессора от "Москвич 412"
Знатная hyita получилась. Блестящая.
Прикольная конструкция, молодца ! Только , чтобы по деревьям пострелять, надо было по-дальше в лес уйти...пару дней пути и стреляй сколько хочешь ! не далеко ушел, короче...
Now I'm ready for the apocalypse 🧟♂️
Это конечно не обычно и круто... Но, у меня ряд вопросов по поводу функций :
Какова сила натяжения?
Никакая вообще...
Здоровый мужик такую конструкцию сломает голыми руками
Нравится мне,когда сначала покажут изделие,а потом изготовление. Конструкция лука интересная, но думаю прочность маловата.
I dont know why I see this, but really nice work bro!
😅
It's a cool proof-of-concept, but there is no where near enough tension to make that an effective shot
Take a few new attempts at refining this concept !
You could actually be on to something in a post apocalyptic society where survival of the ingenious might become impairative !
While I might sound a bit sarcastic, I can assure you,
I am quite serious !
What are you using for your springs ?
What can we do to refine your pivot points ?
I think it may help with quieting down your release !
What are you using for your drawstring ?
And what could you possibly use in a survival situation, where you might not have access to a local sporting goods shop !
Spring selection is obviously going to be critical !
And static spring tension prior to your initial draw, will certainly assist with potential lethality !
What's the chances you might consider doing a second new, and improved version ?
Seriously, you might be on to something, when you have to do with what you happen to have available, and not what you wish you had !
You definitely have my attention !
スタビライザーやサイトがないけど…それがまたかっこいい
けどレストとクリッカーなしで撃てるとかスゴすぎる…アーチェリーと和弓のハイブリッドだ.ᐟ.ᐟ
Гениальное изобретение!!!
Патент!!!
I think i prefer grow trees and make wood bows,,
Plus im not skill n didn't have powertools,,
Scrap metal use for arrow tip or forge KERIS.
But anyway it's got nothing todo with the video,,
The video is good, the guy is enjoying and inspiring others
Nice idea perfect as an emergency tool, short range bow. I can already see the frame moving, this will malfunction soon. But still a great idea.
Oh yeah 😎. Soft aluminum wheel? 👍 👌 🙆♂️ 🆗️
Great 👍 job. Great make shift bow. Might come in handy. Urban survival
Genial das werde ich auf jeden Fall ausprobieren. Mal eine andere wariante 😊👍👍
Not trying to sound like “ that guy” but I did think of this back in 2007. Always thought it was a cool idea. This one looks good it’s sleek but I had a heavier design lol probably get tired of holding it.
Could come I'm handy during the Zombie apocalypse
In these apocalyptic times, a viable option.
انت حقا بارع جدا👍🏻👍🏻👍🏻👍🏻👍🏻
This guy is ready for the apocalypse.
amazing
What a time to be alive
if he shortens the bowstring and starts with the springs already under some tension it will have better range and power
expert
@@WildCraftsman thank u that's generous of you. I practice archery as a hobby and have a mechanical background. Makes it easy to see
The design looks pretty cool I'll give you that, but the pull makes it look like it would be useless at anything over 20'-30'. It just doesn't look strong enough, and swapping out the springs that are attached alone I don't think would do the job. Even 50lbs worth of pull would likely snap it where you made the cuts for the center piece to attach to the other two. The tubing you can see in the cross section would add to the strength, but not enough to handle any twists to the frame that are likely to come from somebody who only shoots left OR right-handed. It makes me want to see something like this done with some kind of a light duty leaf spring though. Maybe with a stronger material you could keep the same general shape, and include some counter springs on the front where the arms would pivot instead of being fixed to the center piece? One set of springs pulling the arms towards the handle, and another set of springs pulling the bowstring should strengthen the pull considerably, and if it was made out of a leaf spring then that would address the twist because then it can be spread through the layers.
It's something cool to play with but like you said it's not strong enough to do anything really useful.
Well done.
Даже стесняюсь спросить: усиленная шайба + гравер под болтовое соединение не нужны? Через 80-100 реальных выстрелов у моей покойной бабушки костыль в лучшем состоянии остался. // Стальная труба диаметром 3/4" при такой же сборке с использованием станка для гибки труб и закалки после печи в масле усилит упругость конструкции минимум в 3 раза, а если ещё "дверные" пружины заменить - тогда реально годная вещь получится.