Thanks for your help on this video. Great to have a wide range of subtitles that helps us who English is not our first language to understand what you are doing 👍👍
Hi Ed, Great Great tutorials. I've just one question . For us who have the MKS GEN L 2.1, the exact same pin out as this 1.0, how do we program de second fan to cool down the second extruder?
Love your videos on the MKS Gen L. Do you know if it is possible to run a thermocouple instead of a thermistor? I want to push my ender 3 pro to run nylon. I was thinking about using an spi K-type daughter board. Thoughts??
Edward: I’ve seen a couple of your tutorials on setting up the fan to turn on and off using type-in commands. How do you set the fan (D9) up so that it turns on automatically when you turn on the power supply?
Can you make a video showing the different jumper configurations on this MKS Gen L board for TMC2208 and TMC2130 drivers? I have not found one that shows what and how those jumpers affect stepper motor performance. Thank you!
Well, all right with you. Thank you for all this information I have received from you. I have a question how much can the AC servomotor? What would you like to know about the Servo motor? Do you mean how much voltage? 5 Volts Swedish: Vad skulle du vilja veta om servomotorn? Menar du hur mycket spänning? 5 volt.
Some people think I'm German because of my surname. When I was a student in highschool we had a student exchange with City of Bremen. My math teacher used to spend 15 minutes of our precalculus class talking about the exchange. So when I request to talk about math, she requested that me to wait until she finished. Funny fact was she pronounced Breman in English rather than the way it sounds in Germany, which is Braiman. Never had the heart to correct her German in math class and she never made the connection.
Edward Braiman Yes, I know the city and I actually think you are German living in Sweden, that's why I write in Swedish to you. funny teacher you had hahaha
hello, I followed your steps, but when connecting to pronterface I get this message "Error:MAXTEMP triggered, system stopped! Heater_ID: 0 Error:Printer halted. kill() called! " and the connection fails. Can you tell me what my problem is
Hello, i upgraded my ender 3 melzi mb to mks gen l v1 0 +3x tmc2208 + lv8729 +external mosfet with marlin bugifx everyrhing is fine except extruder fan not working automaticly at starts or extruder printing 205c pla, i got clogged first time i can set 255 mauel its working and peinting no issues how can i set autostart it with printer on and which version best 1.1.9 or bugfix ?
In Slic3r go-to printer settings tab and set custom gcosed for start gcodes. Or on filament settings tab select cooling. When you slice your model for printing it will be wrapped up in gcode file.
@@EdwardBraiman with gcode part cooling fan starts which layer i selctee exqmple layer 2, i dont use at the same time com port let only one program i know that but formly with melzi board when i turned on printer extruder fan started too, i ll dig it maybe there is marlin config for it
Thanks for your help on this video. Great to have a wide range of subtitles that helps us who English is not our first language to understand what you are doing 👍👍
You're welcome.
hi - thank you for sharing this! Can you tell where the fan of the extruder cooling is? you show the fan of the nozzle cooling - right?
Fan cooling on this video is dated as Marlin firmware has evolved to many things that can be cooled.
Hi Ed, Great Great tutorials. I've just one question . For us who have the MKS GEN L 2.1, the exact same pin out as this 1.0, how do we program de second fan to cool down the second extruder?
If the pins are the same as MkS Gen L v1.0 you can use a fan extender.
Note fan extender is rated for 12v.
@@EdwardBraiman That's a good idea. Thanks
thanks for the help. FAN connected was 12v is it possible to connect 24 V fans and 24 v power. ? keep up the great videos
Normally fan type is dictated by power supply.
Love your videos on the MKS Gen L. Do you know if it is possible to run a thermocouple instead of a thermistor? I want to push my ender 3 pro to run nylon. I was thinking about using an spi K-type daughter board. Thoughts??
Thank you for doing that video, they are a great help.
You're welcome.
Edward: I’ve seen a couple of your tutorials on setting up the fan to turn on and off using type-in commands. How do you set the fan (D9) up so that it turns on automatically when you turn on the power supply?
You can activate fan via Slic3r command or in Pronterface with the command for starting print. Basically it's normally encapsulated in gcode file.
Nice Walk through!
Thanks for sharing 😀👍
You're Welcome, granted had to record again and again each step several times because of the mistakes in explaining.
Can you make a video showing the different jumper configurations on this MKS Gen L board for TMC2208 and TMC2130 drivers? I have not found one that shows what and how those jumpers affect stepper motor performance. Thank you!
I'm planning on doing videos soon just trying to understand the datasheet better for tmc2130.
@@EdwardBraiman Thank you. Can't wait to see them. I've subscribed and hit the notify bell so I don't miss them.
Tja allt väll med dig. Tack för all detta information jag har fått från dig.
Jag har en fråga hur mycket kan om ac servomotor?
Well, all right with you. Thank you for all this information I have received from you.
I have a question how much can the AC servomotor?
What would you like to know about the Servo motor? Do you mean how much voltage? 5 Volts
Swedish:
Vad skulle du vilja veta om servomotorn? Menar du hur mycket spänning? 5 volt.
Edward Braiman Yes, I think you were Swedish because there was a Swedish text, but it was UA-cam translation. Sorry
Edward Braiman It stands as you translate
Some people think I'm German because of my surname. When I was a student in highschool we had a student exchange with City of Bremen. My math teacher used to spend 15 minutes of our precalculus class talking about the exchange. So when I request to talk about math, she requested that me to wait until she finished. Funny fact was she pronounced Breman in English rather than the way it sounds in Germany, which is Braiman. Never had the heart to correct her German in math class and she never made the connection.
Edward Braiman Yes, I know the city and I actually think you are German living in Sweden, that's why I write in Swedish to you. funny teacher you had hahaha
hello, I followed your steps, but when connecting to pronterface I get this message "Error:MAXTEMP triggered, system stopped! Heater_ID: 0
Error:Printer halted. kill() called!
" and the connection fails. Can you tell me what my problem is
Probably either thermistor not plugged in or broken.
Hello, i upgraded my ender 3 melzi mb to mks gen l v1
0 +3x tmc2208 + lv8729 +external mosfet with marlin bugifx everyrhing is fine except extruder fan not working automaticly at starts or extruder printing 205c pla, i got clogged first time i can set 255 mauel its working and peinting no issues how can i set autostart it with printer on and which version best 1.1.9 or bugfix ?
In Slic3r go-to printer settings tab and set custom gcosed for start gcodes. Or on filament settings tab select cooling. When you slice your model for printing it will be wrapped up in gcode file.
@@EdwardBraiman but not part cooling fan i can use like ur told, front fan which cooler the extruder aliminum block its not autostart now
Does it not work with gcode command? Or are you referring to the fan extender on servo pins?
Are you using Pronterface with Slic3r?
@@EdwardBraiman with gcode part cooling fan starts which layer i selctee exqmple layer 2, i dont use at the same time com port let only one program i know that but formly with melzi board when i turned on printer extruder fan started too, i ll dig it maybe there is marlin config for it
Hello sir,
What is the purpose of having two hotends?
The purpose of two or more hotends is to print multiple materials.
@@EdwardBraiman Thanks.