I absolutely love your videos and the genuine person you are. Your content is raw and the scenery is beautiful and the boats are sick! Keep up on the projects!
Ever consider a Boat Vibes shirt w/ a cartoon image of yourself rocking the sunglasses & flipped up hat bill on the back of the shirt? It would be hilarious! I’ll place an order now!
Legit video bro. Thanks for the heads up on the signs. Us west coast boaters don't see that kinda stuff. Videos are getting better and better. Keep it up!
Love all your videos man and so waiting for the big Donzi to return but love your Checkmate too. Where was that ramp you launched from at the 1 minute mark?? Thanks
I don’t use a torque wrench for the prop nut but I do use the spacer with the tabs to lock the nut in, Love the vids and that your partner in crime is with you and she enjoys boating, my wife and I do everything together. Love the shirt how do you get one! Have a safe and fun weekend you two!!
Your vids are great, just a normal boat guy, keep it up..I worked at mercury racing shop, your 250 should have easily turned that 24, we've ran 26 and 28s, something is not right, cleaver is wrong prop, you need bow lift not stern lift. For your safety get a nosecone gearcase so you don't have a blowout bro, plus it's faster too..Just free advice..lol
Thank you man I figured out today my issue, fuel pressure is at 50psi the whole time. I just ordered a new fuel regulator, in this video guardian was limiting me because of the oil tank it did not beep but will limit me. I disconnected the tank and then connected the two wires together. Also my buddy let me use his regulator that I know works. The boat ran amazing! It was a quick run but it definitely made a difference. Everyone keeps telling me about a nosecone I might have to do it soon.
@@boatvibes We disconnected the oil stuff and just mixed, less headaches. The nosecone will give you better handling, more lift, noticeable better performance. We used Bob's seeing your skills, you should be able to do it yourself. Yup low fuel pressure will do it, I could hear the labor on video. If you get a chance try a Trophy plus, great holeshot and lift, might be 2 to 3mph slower than a mirage. Keep the videos coming bro, fun to see👍👍 just don't end up on chit show...lol
Hey danc0068, I have a few questions for you! I just mounted a 2001 300x onto a 20 foot Arriva "Ski" open bow, with a 5 inch jack plate/set back (needed to accommodate a 25" shaft). I have no idea what to expect, super excited to get 'er wet. Still working on gages and wiring. I think it weighs 2300 pounds total, I'm at 6400' elevation. I just took a 1991 Yamaha 225 off it; the Yamaha is very reliable, but only has 91 psi compression (this Yamaha will go on a 1978 16' Cee Bee Avenger, again, no idea what to expect, but I will wear a life jacket and maybe a helmet 🤣). This "new" merc has 150-152 psi... I'm hoping for 70+ with this new package. Any suggestions on where to start with prop, style and pitch? Do they make a "nose cone gear case" for the merc 300x? Or do I need to find an after market one? Would nose cone gear case make a big difference in my application? I've owned this boat for 20 years, I love it, but I scrapped the Force 150 (39 mph), next I tried a 2001 Merc 150 (50mph), a 1991 Yamaha 225 (51 mph) and now this big Merc 300x, all in pursuit of 70 mph. I'd love any input. Any thoughts on the Yamaha/Cee Bee project? Thanks!
@@bcbarc7044 I believe it's a heavy boat and needs bow lift. I'd try a 4 blade trophy, or a bravo..Trophy will give you lift. If you can find a big hub laser ii.
As always Nice video You should throw up a map real quick at the end of every video to show you go In the water People could get better understanding how well you know that water. Also you could show mpg’s
Do u know if u happened to be on the chit show since u came out of Blackpoint Marina? And I’m pretty sure u know what the chit show is with good ole Alfred and his channel! Was he there that day filming when u took out the checkmate? And just curious have u tried a Cleaver propeller? And what size mercury is that? U need to try and find a 250 Pro XS outboard!!!! Those motors are freaking bullet proof!!!
No he was not there that day. I haven't had a chance to try Cleaver prop. I have a 2003 250 efi in my opinion this engine is more bulletproof than the pro access because it doesn't have the extra injectors and the compressor. By the end of the year I'm going to be putting a brand new 300 Pro Xs on the checkmate
@@boatvibes oh heck yeah, that will be badass big man!!! And yeah all my buddys that had bass boats all had that pro Xs and never had a lick of trouble out of them that’s just why I mentioned that motor. So the new 300 pro XX ur going to do is that the new v8 version or are u going to stick with one of Mercury’s 2 stroke motors?
@@boatvibes just out of curiosity, will that new v8 weigh down the back to much? I don’t know what the differences in weight would be between that optimax I have on there and the new v8? And hell if ur going to do the new v8 why not just do a new 300R instead of the pro xs or a 250R? I believe they make a 250R. But that thing is going to shoot out of the water with one of those new v8 motors on the back!! I can’t wait for u to do it big man!! And what’s the update on ur dads motors being rebuilt, are they done yet?
i thought i seen you on wavy boats video of the miami haulover inlet but it was another checkmate, i thought checkmate was what you called your boat not the actual brand haha im an idiot
I have to go see it, I love seeing other checkmates in south Florida. I will definitely not take my checkmate out of Haulover lol. Maybe when I have 100k subs 😂😂😂
So what did it run? See you took the channel name off the boat too. You don't have a navigation app on that fancy tablet? 🤦♂️ Don't know how you can tell its getting shallow, water that clear all looks shallow..lol. oh yeah, forgot to grease your shaft.😆😆
I have not found a app that I like to use. I knew there was a shallow coming up so I was looking out for it. My big polarized glasses helped out a lot with that
@@boatvibes don't know much about them FI mercs, can't offer any suggestions. You said you changed the alt. so you should be getting enough juice, is the pump going out maybe?
I absolutely love your videos and the genuine person you are. Your content is raw and the scenery is beautiful and the boats are sick! Keep up on the projects!
Thank you for the kind words brotha 🤙
Ever consider a Boat Vibes shirt w/ a cartoon image of yourself rocking the sunglasses & flipped up hat bill on the back of the shirt? It would be hilarious! I’ll place an order now!
I'm going to make that happen I want that shirt 😎😄
@@boatvibes Hope to see them on a Boat Vibes merch store. When ur big time famous just remember us little guys 😂
That is so great brother! Congrats and thank you for sharing
What an awesome boat it looks good in the raw, but I sure it will look fire when you are done with it!!!!! Can't wait to see it!!!!
Legit video bro. Thanks for the heads up on the signs. Us west coast boaters don't see that kinda stuff. Videos are getting better and better. Keep it up!
Thank you man 🤙
Another great video man!
Dude, how you out on the water all the time. lol That's bad ass! I can't even go fishing twice a year
Best vibes only! Wishing you and the fam and safe and fun Memorial weekend!
Thank you brotha!! Enjoy your weekend 🤙
I love this guy. Guy's it is what it is
Love all your videos man and so waiting for the big Donzi to return but love your Checkmate too. Where was that ramp you launched from at the 1 minute mark?? Thanks
Thank you man that was Black Point Marina. I will be making a Donzi ZRC update video soon
Checkmate looking clean without the bumpers 👍
What app are you running on the iPad?
Have you tried a 30 ET Lightning on your boat yet? I run one on my 300 and its a great prop IMO. Mind you I run it on an 21 MTR.
I don’t use a torque wrench for the prop nut but I do use the spacer with the tabs to lock the nut in, Love the vids and that your partner in crime is with you and she enjoys boating, my wife and I do everything together. Love the shirt how do you get one! Have a safe and fun weekend you two!!
Thank you man 😎 yes we are always together also. Soon I'll be posting up the shirts I have designed .
What year? HP? Prop? And of course top speed? I. about to pick o r of these up this weekend.
Niceeeee! Must be nice to boat daily
Broo i just bought a 10" jackplate for my 1986 starflite is that good with a Yamaha 220hp Special and chopper yamaha drag 24p?
Going to get a deep v go fast soon?? Love the vids
My next go fast project will be a twin V 😎😸
It’s a locknut. You’re fine. And it you’re worried just put it in gear to tighten it if you can’t find a block or something
Have you ever thought of rigging an awning on the Checkmate?
Yea just crank it down you don’t need no torque wrench, I wedge a piece of wood between the prop and the cavitation plate
Your vids are great, just a normal boat guy, keep it up..I worked at mercury racing shop, your 250 should have easily turned that 24, we've ran 26 and 28s, something is not right, cleaver is wrong prop, you need bow lift not stern lift. For your safety get a nosecone gearcase so you don't have a blowout bro, plus it's faster too..Just free advice..lol
Thank you man I figured out today my issue, fuel pressure is at 50psi the whole time. I just ordered a new fuel regulator, in this video guardian was limiting me because of the oil tank it did not beep but will limit me. I disconnected the tank and then connected the two wires together. Also my buddy let me use his regulator that I know works. The boat ran amazing! It was a quick run but it definitely made a difference. Everyone keeps telling me about a nosecone I might have to do it soon.
@@boatvibes We disconnected the oil stuff and just mixed, less headaches. The nosecone will give you better handling, more lift, noticeable better performance. We used Bob's seeing your skills, you should be able to do it yourself. Yup low fuel pressure will do it, I could hear the labor on video. If you get a chance try a Trophy plus, great holeshot and lift, might be 2 to 3mph slower than a mirage. Keep the videos coming bro, fun to see👍👍 just don't end up on chit show...lol
Hey danc0068, I have a few questions for you! I just mounted a 2001 300x onto a 20 foot Arriva "Ski" open bow, with a 5 inch jack plate/set back (needed to accommodate a 25" shaft). I have no idea what to expect, super excited to get 'er wet. Still working on gages and wiring. I think it weighs 2300 pounds total, I'm at 6400' elevation. I just took a 1991 Yamaha 225 off it; the Yamaha is very reliable, but only has 91 psi compression (this Yamaha will go on a 1978 16' Cee Bee Avenger, again, no idea what to expect, but I will wear a life jacket and maybe a helmet 🤣). This "new" merc has 150-152 psi... I'm hoping for 70+ with this new package. Any suggestions on where to start with prop, style and pitch? Do they make a "nose cone gear case" for the merc 300x? Or do I need to find an after market one? Would nose cone gear case make a big difference in my application? I've owned this boat for 20 years, I love it, but I scrapped the Force 150 (39 mph), next I tried a 2001 Merc 150 (50mph), a 1991 Yamaha 225 (51 mph) and now this big Merc 300x, all in pursuit of 70 mph. I'd love any input. Any thoughts on the Yamaha/Cee Bee project? Thanks!
@@bcbarc7044 I believe it's a heavy boat and needs bow lift. I'd try a 4 blade trophy, or a bravo..Trophy will give you lift. If you can find a big hub laser ii.
@@MnDan Awesome, thank you!
Go ahead and stick you a brand new Mercury 300 on it bro! 😎 You better be careful at Black Point! You’ll end up a super star on the Chit Show! lol 😂
Was thinking that myself, isn't that where Alfred hangs out?...lol
@@jeffh5886 That’s rite! Across from the boat ramps in the mangrove! He will put that zoom zoom zoom on you! Wait for it! lol 😂
Lol once I put my new pro xs on it I'll launch from there on purpose to come out on his channel lol
@@boatvibes Can’t wait! lol 😂
As always Nice video You should throw up a map real quick at the end of every video to show you go In the water People could get better understanding how well you know that water. Also you could show mpg’s
Definitely sounds like a good idea thank you for your input 🤙
Do u know if u happened to be on the chit show since u came out of Blackpoint Marina? And I’m pretty sure u know what the chit show is with good ole Alfred and his channel! Was he there that day filming when u took out the checkmate? And just curious have u tried a Cleaver propeller? And what size mercury is that? U need to try and find a 250 Pro XS outboard!!!! Those motors are freaking bullet proof!!!
No he was not there that day. I haven't had a chance to try Cleaver prop. I have a 2003 250 efi in my opinion this engine is more bulletproof than the pro access because it doesn't have the extra injectors and the compressor. By the end of the year I'm going to be putting a brand new 300 Pro Xs on the checkmate
@@boatvibes oh heck yeah, that will be badass big man!!! And yeah all my buddys that had bass boats all had that pro Xs and never had a lick of trouble out of them that’s just why I mentioned that motor. So the new 300 pro XX ur going to do is that the new v8 version or are u going to stick with one of Mercury’s 2 stroke motors?
The new v8 😎
@@boatvibes just out of curiosity, will that new v8 weigh down the back to much? I don’t know what the differences in weight would be between that optimax I have on there and the new v8? And hell if ur going to do the new v8 why not just do a new 300R instead of the pro xs or a 250R? I believe they make a 250R. But that thing is going to shoot out of the water with one of those new v8 motors on the back!! I can’t wait for u to do it big man!! And what’s the update on ur dads motors being rebuilt, are they done yet?
Good vide
Boat looks way better without the youtube decals on the side!
I agree, but I have to promote the channel. I'm thinking of making a big flag. And taking it with me whenever I go out on a boat
@@boatvibes That sounds like a way better idea. goodluck bro.
i thought i seen you on wavy boats video of the miami haulover inlet but it was another checkmate, i thought checkmate was what you called your boat not the actual brand haha im an idiot
I have to go see it, I love seeing other checkmates in south Florida. I will definitely not take my checkmate out of Haulover lol. Maybe when I have 100k subs 😂😂😂
@@boatvibes yea check out his recent video lol i claimed it was you but then realized it wasnt haha, the memorial day video he just released
@@boatvibes ua-cam.com/video/egwRmwIwicQ/v-deo.html 1:27
I have seen that boat posted for sale on offer up, that hull is a little bigger then mine. Thank you for making it easy for me to see it lol 🤙🏽
@@boatvibes no worries man
Gotta like the video before you even watch it 🤙
Thank you for the love man 😎
Yes you are the only one the rest of us use a torque wrench to do things right what an amateur
Sell some shirts
So what did it run? See you took the channel name off the boat too. You don't have a navigation app on that fancy tablet? 🤦♂️ Don't know how you can tell its getting shallow, water that clear all looks shallow..lol. oh yeah, forgot to grease your shaft.😆😆
It only did 61 😥 nothing to brag about. Something is going on with my fuel system. Lol I'll grease it up next time 😄
I have not found a app that I like to use. I knew there was a shallow coming up so I was looking out for it. My big polarized glasses helped out a lot with that
@@boatvibes don't know much about them FI mercs, can't offer any suggestions. You said you changed the alt. so you should be getting enough juice, is the pump going out maybe?
@@boatvibes yeah man, got to have the polarized glasses out on the water.👍
That’s the next thing I am looking into, I am taking off the vet tank sometime next week and going through everything once again 🤦🏻♂️