Blaster seems bunk get the Pasco or Lasco puller. Pretty good, the ferrules usually come off it easy but if not u just spin the tool all the way open and it pops right off takes 5 seconds. Few tips, ream the pipe, dry the pipe and put a little grease, spin the tool not the nut it will pull much better. If it is crazy tight stop or the tip will get stuck move to plan B, which might be the ferrule cutter tool I don't have. Keep up the good work 👊
@sittingbull161 i got the saf t cut. I had the Pasco puller given to me and I tried it once and threw it away. Maybe they gave it to me because it was broken I don't know
Aw hell what a terrible thing to happen but especially right before Christmas!!! What can be done about the pipes rotted you saw through the cam? Not sure what the access points are but I guess they just need to be replaced, or better yet if they can be relined without having to tear things up?
Was this a weekend call ? I seem to have the worst calls on the weekends. Never fails Half the time I need something from the supply house and they close at noon on Saturday and the call comes in at 1:00 PM
Damn. It’s never a good time for a sewage backup. “The Nightmare Before Christmas” They’re pretty fortunate you were there to clear it. All the best dude!
Ok when you were using the dremel and grabbed the band and burned the shit out of you finger I spit beer clear across the room. 30 years doing this crap and I still do stupid stuff 😅
I installed a new toilet seat. I know your struggle. I bought a fancy one that can be removed pushing a button but I had gotten elongated instead of oval but in my defense the toilet bowl is longer than it is wide so it looked elongated to me. So I order a different seat on amazon and as I'm opening it I notice that the hardware bag is open and that one of the two mount bolt/nuts is missing. Even the one plastic bolt/nut that came with it didn't work. I'd tighten it and the nut would just pop off. So I used the fancy metal/rubber hardware that came with the fancy seat but the new seat has a proprietary system where the bolt kind of locks in some grooves so it wasn't ideal but I just tightened the hell out of it and the seat is solid. I also noticed that the seat mount hinge was damaged on one side on the new seat. It's harder to open/stiff and it makes a grinding noise but fuck it, I can live with it. I did take the hinge apart and spray in wd40 but no luck. I think the soft close mechanism is messed up. The hinge on that side also has a big gap compared to the other side. I'm not going to return the fancy $60 seat without the hardware and screw someone like I was screwed, though the plastic screw/bolt crap wouldn't have worked anyway. One day someone will need an emergency elongated toilet seat and then I will be the hero. Until then it will be a heirloom of my house, passed down from one generation to the next until it is called on to fulfill it's destiny one day.
Blaster seems bunk get the Pasco or Lasco puller. Pretty good, the ferrules usually come off it easy but if not u just spin the tool all the way open and it pops right off takes 5 seconds. Few tips, ream the pipe, dry the pipe and put a little grease, spin the tool not the nut it will pull much better. If it is crazy tight stop or the tip will get stuck move to plan B, which might be the ferrule cutter tool I don't have. Keep up the good work 👊
@sittingbull161 i got the saf t cut. I had the Pasco puller given to me and I tried it once and threw it away. Maybe they gave it to me because it was broken I don't know
lol love that you include all the bumps along the way , that is some of the most interesting content. Thanks for sharing
BEEN THERE, DONE THAT, everything gets funky for sure, but YOU got funkier and nailed it, thxs for sharing( i was worried you was going to explode)
that was a good one! Happy holidays bro
That drain is obviously tired of those people's crap!!!!!!
Oh man... That is a pretty awful situation for a family with small children / babies. Glad you were able to help them.
Nobody cares whether she's a single mom or not just fix the crap
I agreed with you 💯.
Aw hell what a terrible thing to happen but especially right before Christmas!!! What can be done about the pipes rotted you saw through the cam? Not sure what the access points are but I guess they just need to be replaced, or better yet if they can be relined without having to tear things up?
@@ShutoStriker maybe reline
Good stuff dude. Poop fingerprints all over the place 😂
"why do you wear gloves" now becomes "why do you wear a Hazmat suit?" Sorry to see during the holidays! Happy you help them.
Single mom doing the best she can 🥵
Was this a weekend call ? I seem to have the worst calls on the weekends. Never fails Half the time I need something from the supply house and they close at noon on Saturday and the call comes in at 1:00 PM
@@williamloder9194 weekday
almost always a clean out somewhere......ive found then under carpets ...bark mulch you name it...nobody ever marks them and nobody remembers
'SAVIOR'
Damn. It’s never a good time for a sewage backup. “The Nightmare Before Christmas” They’re pretty fortunate you were there to clear it. All the best dude!
And you want to become a plumber? 😂
Ok when you were using the dremel and grabbed the band and burned the shit out of you finger I spit beer clear across the room. 30 years doing this crap and I still do stupid stuff 😅
Wow interesting thanks as always love the insights
Yikes!! What a mess. Plumbers really earn their money.
Thanks for sharing.
Where are you located?
@@buterdhams LA
Definition of a shit show bro. Great job staying level headed.
I love single moms
Gotta get yourself some standards
Great video!
Get the saf - T - kut angle stop tool
What’s the point of adding single mom in the title??
Ratchet 5/16 socket
I use my Cheney locks on the Ferrell blaster bro 😂
I use the pasco puller, way better with an impact
wow kinda stressfull going out on those ones for me anyway
I installed a new toilet seat. I know your struggle. I bought a fancy one that can be removed pushing a button but I had gotten elongated instead of oval but in my defense the toilet bowl is longer than it is wide so it looked elongated to me. So I order a different seat on amazon and as I'm opening it I notice that the hardware bag is open and that one of the two mount bolt/nuts is missing. Even the one plastic bolt/nut that came with it didn't work. I'd tighten it and the nut would just pop off. So I used the fancy metal/rubber hardware that came with the fancy seat but the new seat has a proprietary system where the bolt kind of locks in some grooves so it wasn't ideal but I just tightened the hell out of it and the seat is solid. I also noticed that the seat mount hinge was damaged on one side on the new seat. It's harder to open/stiff and it makes a grinding noise but fuck it, I can live with it. I did take the hinge apart and spray in wd40 but no luck. I think the soft close mechanism is messed up. The hinge on that side also has a big gap compared to the other side. I'm not going to return the fancy $60 seat without the hardware and screw someone like I was screwed, though the plastic screw/bolt crap wouldn't have worked anyway. One day someone will need an emergency elongated toilet seat and then I will be the hero. Until then it will be a heirloom of my house, passed down from one generation to the next until it is called on to fulfill it's destiny one day.
Damn I miss plumbing
Your furrel puller sucks! I use simply hand unit works perfect each time.
tv on all day.....watching garbage and thinking they are so cool. "Is there a cleanout here somewhere?. Tenant..whats that duh.???