Make a Smart glasses using ultrasonic Sensor and arduino nano || inspired award winning project 🥇
Вставка
- Опубліковано 21 жов 2024
- How to make a Smart glasses using ultrasonic Sensor and arduino neno
Components used
Arduino neno
Buzzer
Ultrasonic Sensor
9v battery
Battery clip
Push button
Glasses
Jumper wires
Code :
drive.google.c...
Is the negetive wire of the battery clip is first connected to switch and then other negetive wire to other end of the switch and then to the arduino nano?
Please reply fast.
🎉Amazing, it helped me for my project. Keep it up bro😊
was it working ? after you tried making it ?
This is the best video I've seen on this so far! I don't know why it's not ranking number one on UA-cam search
I agree
What did you do with the button on Battery Wires. What are the wirings for the negative wire, how do I attach it?
Hı friend. Thanx for the project. Can i use a mini vibration motor for this project?.. And can you send me the codes for the vibration motor?..
Thank you sir very useful ❤😊
Is the positive wire of the battery clip first connected to another wire and then to the arduino nano?
what did you do with the button on battery wires. what are the wirings for the negative wire, how do i attach it?
please reply this comment
😊😊
Good bro
Bro mine switch only work only when i press it and does not work when i stop pressing it .
I want the switch works the same way you shown in the video.
Can you help me plzz!
Nice
Agar iski bettery ka.charge khtam ho gya to kese change karenge
what did you do with the button on battery wires.
Bro what is the cost of this whole project
Around 3000 pkr
Hii can i use female-female wires for this??
Yes, of course
The code uploading takes for ever. Help me!
Same!
Me too same problem
Please configure the Arduino ide and make sure you are connected the Arduino port correct
Same
bhai sab thikk chal raha hai but buzzer continuously baj raha hai so please give me solution fast
Please make sure the buzzer wires is properly connected
It's working now thnx ❤
Very nice 👍👍
Konsi battery theek rahegi 9 volt or Lithium polymer battery 3.7 volt
Aur button dusra use kar sakte hai??
And still didn't get the battery and butoon connection
G han ap koi sai bi battery use kar skty hoo or rahi baat button ki wo bi ap koi sa two terminals wla lga skty hoo baki connection sra sme hi rhy gaa
Can someone help me why my ultrasonic sensor works only if the port is connected to the laptop and not actually works in switch/buttons (I already uploaded the code in adruino)
this is the same problem as mine
Same
the switch buttons are most likely not connected properly.
I dont have header pins. Will aurdino nano work without it
Yes it work if you connect with soldering iron
After connecting clip to the battery 11:21 what is that extra 2 wires connected at the end of the clip bro . Please reply fastttt broo
Bro its much simple you said when i attach the battery clip where i connect the 2 wires the negative one is connect to the gnd pin or arduino and positive is vin
Is the button normally closed or does it simply return to its position?
hello I carried out the same project as you but mine does not work without the cable connecting the Arduino card to the PC, even after uploading the program.
Same problem. Did you fixed that problem?
@@Lost_Soul619did you fixed?
@@Horlicks_dappa nope bro. Don't follow this video. There's lots of errors. He used 9v battery for arduino nano,which is too much. If you want to do this project you will need 2 lipo battery (3.7v) or you can use converter. Though i tried 2 lipo battery process and commoned them. Still it's not working properly. You will need 5-6v supply which is suitable. I tried it with dc power supply from lab. And it's working under 5-7v range. You can try at your own risk. First try with 5v converter.
@@Lost_Soul619bro i actually brought all items in this video for my science project can i do this??
@@Lost_Soul619btw can you provide the link for 5v conventer??
Bhai iska weight kitna hoga
What happens if battery got over
Why the code is not visible...please help me
Nice ❤
Code is not uploading! It says uploading but I waited more then 2 hours but it didn't work.
Same
Please configure the Arduino ide and make sure you are connected the right Arduino port
This project is not working or fake
What do you mean?
What after battery over 😢
How to recharge
Please reply
This battery is not rechargeable battery
Bro after disconnecting the arduino cable it's not working. Can you help me to solve this issue?
BRO I WANT THE CODE , IN THE LINK IT IS SHOWING THAT THE CODE IS NOT AVAILABLE
@@funnyyt757
const int trigPin = 3;
const int echoPin = 2;
const int buzzer = 5;
long duration;
int distance;
int safetyDistance;
// Adjust this value to change the speed of sound for your environment
const float speedOfSound = 0.0343; // 343 meters per second (default)
void setup() {
pinMode(trigPin, OUTPUT);
pinMode(echoPin, INPUT);
pinMode(buzzer, OUTPUT);
Serial.begin(9600);
}
void loop() {
digitalWrite(trigPin, LOW);
delayMicroseconds(2);
digitalWrite(trigPin, HIGH);
delayMicroseconds(10);
digitalWrite(trigPin, LOW);
duration = pulseIn(echoPin, HIGH);
// Calculate distance using the adjusted speed of sound value
distance = (duration * speedOfSound) / 2;
safetyDistance = distance;
if (safetyDistance
Hello
My sensor was not working and I have copy your code and same as you have said I have done but my sensor and buzzer was not working
Please help me
Check your sensor is it ok
@@thewiredworldofqasim yes my sensor is ohk but still not working
I have tried twice time but continuesly buzzer buj raha hai ya toh pura band ho ja Raha hai
Please help me out
Hi, I dont know why but the code it taking forever. I had waited more then an hour but still says uploading. My internet speed is good enough too. Its more then 80 MBPS but still taking forever the sketch to upload. Bro help me!
Please configure the Arduino ide and make sure the Arduino port is correct attach
@@thewiredworldofqasim THX
Which jumber wire used bro
About your requirement but i used female from one side and other side is join with soldering iron
TQ bro
hello pls help us this is the thesis by my dAughter the need the code pls
The project is not working. I also Upload the code.
Tell me the problem which you face
BRO IN GOOGLE DRIVE THE CODE LINK SHOWING NOT AVAILABLE
Name
Please send the code😊
Need code 😂
The code is working bruh its super bruh
Bro please send me the code too ..
Code link does not open.please send me this code.
drive.google.com/file/d/1pajXuIAFeWmo_LnfdEhKKf_ffazrYgYF/view?usp=drivesdk
const int trigPin = 3;
const int echoPin = 2;
const int buzzer = 5;
long duration;
int distance;
int safetyDistance;
// Adjust this value to change the speed of sound for your environment
const float speedOfSound = 0.0343; // 343 meters per second (default)
void setup() {
pinMode(trigPin, OUTPUT);
pinMode(echoPin, INPUT);
pinMode(buzzer, OUTPUT);
Serial.begin(9600);
}
void loop() {
digitalWrite(trigPin, LOW);
delayMicroseconds(2);
digitalWrite(trigPin, HIGH);
delayMicroseconds(10);
digitalWrite(trigPin, LOW);
duration = pulseIn(echoPin, HIGH);
// Calculate distance using the adjusted speed of sound value
distance = (duration * speedOfSound) / 2;
safetyDistance = distance;
if (safetyDistance
Bro this is the code
int trigpin=12;
int echopin=11;
int traveltime;
float pingtraveldistance;
float targetdistance;
int buzzer=9;
void setup() {
// put your setup code here, to run once:
pinMode(trigpin,OUTPUT);
pinMode(echopin,INPUT);
pinMode(buzzer,OUTPUT);
}
void loop() {
// put your main code here, to run repeatedly:
digitalWrite(trigpin,LOW);
delayMicroseconds(10);
digitalWrite(trigpin,HIGH);
delayMicroseconds(10);
digitalWrite(trigpin,LOW);
delayMicroseconds(25);
traveltime=pulseIn(echopin,HIGH);
targetdistance=(traveltime*0.034)/2;
digitalWrite(buzzer,LOW);
if (targetdistance
kia os ko ye pehnang sy os ko meri feeling sens ho gi ?
Us ka liya ma ik sensor tayar kar raha hoon kuch saal lag jayan ga muger possible ha ya karna 🤣🤣
Han han ho jaye gi sense😂😂
Sir please send smart glasses code sir 😢😢😢 please urgent sir 3/1/24 this date science day will be conducted sir😢😢
Can you give me access to the code? I am only allowed to do so with your permission
I can't access the code bro. Can i have another one? Reply asap. Tnx!
drive.google.com/file/d/1pajXuIAFeWmo_LnfdEhKKf_ffazrYgYF/view?usp=drivesdk
Is this rechargeable
No
How can i send code in it 🤔
In comment
How to upload code link
Simply copy the code from the link in the description than open the code in computer using Arduino ide and select the port and then upload it
Plz share the code
Bro please send me the code link ,
The link which you have provided in the comments we are not able to access it . please send the code libk bro
drive.google.com/file/d/1pajXuIAFeWmo_LnfdEhKKf_ffazrYgYF/view?usp=drivesdk
How to connect button to battery
Bro connect the wire to the battery then take the wire from one terminal of the battery and connect to the one side of button and then add more wire to the other side of the button the connect to either the gnd or vcc to the Arduino must choose one and after that the second wire of the battery is also connected to the remaining point of either gnd or vcc please choose one of those ( if you don't understand feel free to comment again) 💓💓
BRO I AM UNABLE TO UPLOAD THE CODE PLEASE CAN YOU HELP ME
First open the code to Arduino ide then plug in the Arduino usb cable to systen the select the Arduino nano port after all upload the code i think it can help you!
In which app the code will open
There is Arduino ide software from google install the app then this code is opened
How to upload code link 🤔
Is the code still right?
Yes. There is a fully functional if you need i will send you
drive.google.com/file/d/1pajXuIAFeWmo_LnfdEhKKf_ffazrYgYF/view?usp=drivesdk
Bhaiya coding bata do. Please help me 🥺
Bhai mara code upload nahi ho raha ha please bata do kaise upload hoga please mara papa mugha marangha ma code upload kar raha hu per error dikha raha ha kliski ak alag sa veido bana do please nahi to ma apko badua dungha aur fir apka you tube channel band ho jhagya please please please please please please please please please
Ooh bhai simple ha sara kuch easliy code upload hoo jta haa video sai sa dkhoo
You must display a diagram for it!!
Sorry! I don't have diagram.
Where is the codee
drive.google.com/file/d/1pajXuIAFeWmo_LnfdEhKKf_ffazrYgYF/view?usp=drivesdk
Please send the code for my science day project
drive.google.com/file/d/1pajXuIAFeWmo_LnfdEhKKf_ffazrYgYF/view?usp=drivesdk
Bro this code is not working
const int trigPin = 3;
const int echoPin = 2;
const int buzzer = 5;
long duration;
int distance;
int safetyDistance;
// Adjust this value to change the speed of sound for your environment
const float speedOfSound = 0.0343; // 343 meters per second (default)
void setup() {
pinMode(trigPin, OUTPUT);
pinMode(echoPin, INPUT);
pinMode(buzzer, OUTPUT);
Serial.begin(9600);
}
void loop() {
digitalWrite(trigPin, LOW);
delayMicroseconds(2);
digitalWrite(trigPin, HIGH);
delayMicroseconds(10);
digitalWrite(trigPin, LOW);
duration = pulseIn(echoPin, HIGH);
// Calculate distance using the adjusted speed of sound value
distance = (duration * speedOfSound) / 2;
safetyDistance = distance;
if (safetyDistance
This code is not
Okiee
Please help by sharing product link
Brother i don't buy these products from online soo i don't have any links for these products ☹️☹️
Pls give Circuit diagram
There is no prototype for this project
Pleaseeeeee helpppppp
Iska code kya hai
drive.google.com/file/d/1pajXuIAFeWmo_LnfdEhKKf_ffazrYgYF/view?usp=drivesdk
I will subscribe ,but u should send me the code
Ok i will send you the code
drive.google.com/file/d/1pajXuIAFeWmo_LnfdEhKKf_ffazrYgYF/view?usp=drivesdk
not working you liar😡😡
Same problem @CookwithSuma