Frequency matching an iron 2020
Вставка
- Опубліковано 8 вер 2024
- McGolf had a Golf Bomb go off again, meaning a lot off work. Today we are frequency matching a set of Wilson D7. I show you the technique to match your irons
For Golf Club Repair Tools, Golf Fitting Tools and Select OEM’s
Please see the link below.
www.amazon.com...
If you require Golf Club Repairs or would like to schedule a fitting for your best golf or have a question Please contact us at:
mcgolfshop@roadrunner.com
clubmaker@mcgolf.net
For more info please follow us on
Twitter
Instagram
IAMMCGOLF
Thanks so much for all the great content. I am in the middle of setting up my shop and still have so much to learn. You have been making my journey so much nicer thanks again
Enjoyed this much. Nothing beats experience and craftsmanship like yours. 👍
Reinforcing your prowess at fitting and building, I am awed!
Excellent Topic! Frequency matching shafts is a well UNDER USED and important process in club building!
Another great video! I love watching your vids.
PS- I really like the new intro
Awesome info and content. Stay healthy.
Great video thanks Peter
10/10. Enjoyed it
I really like all of your content, but for me at times the details fall just shy. A few questions if I may, Jim. When you trim the tip then remark the new shaft length, maybe mention you are placing that new mark at the butt end, I assume, at the new length in the vice. Also, anyone who has used a spine finder would have felt the stiffness variation. Surely once you find the right frequency and then spine and FLO the frequency is going to change. In my head, it would. Is this the case as I have never used a frequency machine to test this. Thanks again for your content. I love club building and tinkering with my own equipment.
Do you ever build to a MOI specification? What are the pros and cons to building a set using MOI vs SW?
To properly CPM/frequency match each club must the shaft be parallel tip or tapered...also were are the CPM numbers come from on a shaft...Butt/middle/tip....I'm looking at a mid-high to a high launch shaft....a builder from another site said it came from butt end and that seems odd.
When you trim for frequency and then length how do you arrive at the correct length with the correct frequency. i,e, what do you do first? I would assume you trim for frequency, but if you do that, how do you arrive at the correct length ?
Great video Jim. If you have to build with 355 taper are you still able to frequency match or are you just stuck with what you get ? Thanks for the great videos
I was hoping he'd show the Srixon's for this reason.
Your stuck
@@McGolf unless you'd bore the club out to handle a parallel tip correct?
Chad Michael correct
@@McGolf thank you for the answers and the great videos.
I'm in the dark. I didn't get the idea of it too well. You're shortening the shafts to increase the frequency. What if the frequency is too high to start with. Get a longer shaft and cut it down? See? I'm wobbly on all this. Maybe you could explain stuff on your next vid. Thanks, I just subscribed and liked and share 2 of your videos.
i am not familiar with frequency matching and i would appreciate a little context. what number are you reading from the machine and what number are you matching with the chart? and how do you know how much you have to cut off? i am confused. thank you.
JMC, Can an amateur like me get the Frequency for the shafts? How and what do I need to have to get the job done?
Great Video, question about Swing weight sensitive. Do you add the amount of weight to head/Tip weight and then match the needed frequency? Thank you
Yes
Hi. How do you determine the CPM slope between each club. Do you base the flex you want off of FCM chart? For example, you want this person's irons to play as close as possible to 6.0 FCM. To find the slope of the shafts, don't you need the 3i and 9i? Do you tip those shafts to recommended specs to be able to get CPM measurement to correctly determine the slope?
the slope is dependent on the CPM you want between clubs. Typically the slope for rifle was 4.5. Mine is 4.0 to soften the club a bit.
Hey Jim, on graphite shafts is determining spine alignment necessary? I know flo is important in the build process. Great vids. Enjoy every one of them.
I start with finding the spine then Flo, however some companies mark shafts to give you a clue where to start if not spining
@@McGolf Hi! I can't understand why i have to find the spine and put it at 12 if after i need to find the FLO alignment (and use it to built the club, at 12). Thank you! stay safe!
@@nicolabarbolini7189 think of like this, Spine is finding the right church where FLO is finding the right pew. the spine gets you in the general area and the FLO takes into account the actual head geometry.
@@McGolf Fantastic! Thank you!
Do you have a website where I can get information on sending you my Mizuno Mp 5s to have you add a degree of loft to each club and put on a new set of midsize grips ? Or do you only build new from your inventory?
Mcgolfshop@roadrunner.com
Hi McGolf, is there somewhere I could get a frequency chart for the flexes, I'm looking at getting a frequency machine at some point ?
Thanks Steven
Google it and there are tonnes out there. Good Luck
Normally it will come with one. Golfworks has them too
You maybe missing a few steps for Freq matched shafts, maybe talk to Golfworks down the road from you.
I'm planning on doing an iron shaft swap for the first time... Should I find the hard spine and flo?
I’d say yes
@@McGolf okay thanks I'm set up to spine right now looks like I'll try to flo as well
How do u know how much butt shaft sticks out of the frequency machine?
The designated length is at the end of the club
Do ever MOI match? What are your thoughts
No, I know how, just haven’t taken to it or have the gear
How do I get hold of copy of your build chart for frequency matching please
Do you get one with a Goldsmith Analyzer????
Golfworks has them
@@McGolf thanks M8
Which vendor do you purchase the clubheads from?
Wilson , New Level, mizuno. Wishon
McGolf Custom Clubs - Thanks!
Is order by catalog only? Or do they have online options to purchase Clubhead only.
Didn’t see any options online to purchase Clubhead only.
I don’t have one I’m under contract not too with my companies and I don’t want to jeopardize it
McGolf Custom Clubs No problem... thanks
Where do I get a frequency chart and what are the frequency gaps supposed to be in a sit irons
I tried emailing u email is failing
Mcgolfshop@roadrunner.com
@@McGolf I've tried that e-mail it's failing I'll try again I'm looking for irions jpx 825 pro mizunos 4irion to pw 2012 right hand true temper S300 golf pride grips half dry/wet medium this something you can get hold of as in Australia I can't get jpx 825pro as I have a , set of jpx pro 825 I want another set