Cool dipole! I saw a guy comparing the quality of different wires and metals for antenna and the bare copper was the best! I grew up in Bulgaria and can understand about 80% of what you say 😀! Cheers zdravo brate!
J'ai très apprécié cette antenne pour ma part j'ai de bons postes CB rec auprès en braderies et une belge très grande. Avec de petites CB de St Malo dans une après midi j'ai capté des pays scandinaves et l'Allemagne. Je sais faire des postes à galène et des petits émetteurs go et FM. J'ai récupéré des jeux de construction de postes radio en tous genres de boîtes alsaciennes. A bientôt sur UA-cam. Dominique Chartier.
bonjour , votre vidéo est très intéressante . Mais ,il n'y a pas la possibilité de traduire vos commentaires en Français . C'est très regrétables parce que l'on ne comprend pas les indications techniques nécessaire à la construction de cette antenne .Pourriez-vous faire le nécessaire afin que nous puissions avoir la possibilité de la traduction ? Merci .
@@metinmetin8009 The final antenna dimensions according to the indoor environment is 2.57 meters and the SWR is 1: 1.04 at 27.005 MHz. The length of the RG-58 cable greatly affects the SWR itself. I performed the measurements myself with a standard SWR / PWR meter and a NanoVNA Vekrot analyzer.
Hey Randy Jones. Plans and construction videos for a simple 11 meter dipole antenna are everywhere on the internet, including UA-cam! Take a moment and do some research for yourself!
Ja licno koristim u Horizontalnoj jer mi tako odgovara za lokalni repetitor i ako svi u lokalu radimo sa vertikalnom polarizacijom. ja nisam imao aluminijum pa sam koristio bakar i odgovara mi zato sto mi je dipol pod krovom, imam dosta gubitaka samom tim sto je ispod krova ali zavrsava posao za koji sam ga pravio :) Znaci sve zavisi od tvojih potreba i zelja.
Teoreski mozes ali dipol u zatvorenom prostoru se drugacije ponasa nego kad je na otvorenom.u prevodu drugacije rezonuje (zraci) samim tim mora da mu se nasteluje SWR prema okruzenju i preprekama. meni je trenutno duzina jednog kraka 2.57 za zeljenu frekvenciju 27.005 mhz i SWR mi je 1 : 1,04 .
I made a similar antenna from aluminum tubing. Stands up to weather better than copper tubing (more rigid) and if buying the tubing from a store (I got mine from DX Engineering), it cost less! I have one that has been up for 10 years now and still looks and works great! The only thing I did after assembly and tuning was to spray with clear automotive Lacquer, 5 coats! I also used Penatrox A on all connections and joints (prior to spraying) (the antenna is made from telescoping sections of tubing and is tuned by sliding the outer elements in or out like a loaded mobile antenna. 73, de N1WOM
Napravio sam sličnu antenu od aluminijskih cijevi. Podnosi vremenske uslove bolje od bakrenih cevi (tvrđe) i ako ih kupujem u prodavnici (ja sam nabavio svoju od DX Engineeringa), koštaju manje! Imam jedan koji postoji već 10 godina i još uvijek izgleda i radi odlično! Jedino što sam uradio nakon montaže i podešavanja je da sam naprskao prozirnim automobilskim lakom, 5 slojeva! Također sam koristio Penatrox A na svim priključcima i spojevima (prije prskanja) (antena je napravljena od teleskopskih dijelova cijevi i podešena je klizanjem vanjskih elemenata unutra ili van kao napunjena mobilna antena. 73, de N1WOM
Тези тръби са много дебели!!! Ще ти трябва тунер, за антената за съгласуване с предавателя, изходното стапало!! Така си мисля аз! Тръбите трябва да са железни или мед но с диаметър 5мм до 8мм.
Hey Dave. Don't you think to start with he should put a reflector, 5% longer roughly 9' from his dipole and direct his signal? Then he could make a director 5% shorter and and put it 9' from the dipole element the other way and focus his signal a little more. I wonder which polarity he would choose? Remember Dave we all must start somewhere. Thanks Dave
Suggest starting with a dipole. Horizontal or vertical polarization. Use PVC pipe cemented into a PVC electrical box. Use copper grounding wire from the electrical box down the center of each PVC pipe. Install a feed line connector in the cover of the box. Trim copper wire for best SWR. Start with the above, test and experiment and once comfortable add a boom with reflector and director with similar construction.
katastrofa. ovo je antena za one na ugljanu. mogao si i trebao si dati malo truda i napraviti kako spada. sve ok ali ???? drvo i vezice...hej .kad padne kiša ovo je u kratkom spoju a o vjetru da ne spominjem. ali eto bar imaš volje.
Cool dipole! I saw a guy comparing the quality of different wires and metals for antenna and the bare copper was the best! I grew up in Bulgaria and can understand about 80% of what you say 😀! Cheers zdravo brate!
Zdravo Momak< Hvala te cuj Aluminiju je bolje nije tesko kao bakar, Lepo isto kad sum ja bio nismo mogle da imamo CB kao te danas. Pozdrav Ljubisa
Awesome and simple , thanks for the video
We need the swr readings too😊
J'ai très apprécié cette antenne pour ma part j'ai de bons postes CB rec auprès en braderies et une belge très grande. Avec de petites CB de St Malo dans une après midi j'ai capté des pays scandinaves et l'Allemagne.
Je sais faire des postes à galène et des petits émetteurs go et FM.
J'ai récupéré des jeux de construction de postes radio en tous genres de boîtes alsaciennes.
A bientôt sur UA-cam.
Dominique Chartier.
How many cm the stick, and the spasi of iner to outer, positive to negative
Добрый день, друзья, как долго вы измеряете каждую трубку и длину? Большое спасибо за информацию.
bonjour , votre vidéo est très intéressante . Mais ,il n'y a pas la possibilité de traduire vos commentaires en Français . C'est très regrétables parce que l'on ne comprend pas les indications techniques nécessaire à la construction de cette antenne .Pourriez-vous faire le nécessaire afin que nous puissions avoir la possibilité de la traduction ? Merci .
Muito bom amigo bom qso ai na banda 27 mhz
How meny mm are the copper
S'il te plaît moi je veux créer une Antenne TV uhf longue portée comment faire sa
Sehr gut gemacht 👍👍
Good work
Hi dr op. Nice build! Is thera a video where you're testing the dipole?
Hi left 2.75 cm rayt 2.75 cm ??? 73
i will upload one short video soon :)
@@metinmetin8009 The final antenna dimensions according to the indoor environment is 2.57 meters and the SWR is 1: 1.04 at 27.005 MHz. The length of the RG-58 cable greatly affects the SWR itself. I performed the measurements myself with a standard SWR / PWR meter and a NanoVNA Vekrot analyzer.
@Pablo Estafez Hi there... Because on that way you can change length of pipes and set best SWR for desire frequency on that way...
Complimenti,perfect, semplice
Size
kako si rijesio 50R prilagodjenje ?
Boa tarde amigos, quanto tempo vocês medem cada tubo e o comprimento? Muito obrigado pela informação.
Vc usar ai para canal 5/40 comprimento e de 2.63 cada lado
antenamu itu sudah bisa untuk komunikasi paling jauh berapa KM
I WISHED YOU MADE ONE IN ENGLISH
each element 2.6mtr done
@@DOMTHESAUSAGE not using balun ?
@@fastren1 no just coax choke
@@DOMTHESAUSAGE thanks dom..
Hey Randy Jones. Plans and construction videos for a simple 11 meter dipole antenna are everywhere on the internet, including UA-cam! Take a moment and do some research for yourself!
No puedo traducir al español
I’m sorry but I don’t know what language you were speaking it would’ve been nice for you to have made one in English thank you
This is Serbian language.73
Zdravo. Ja sam je napravio od aluminijumske cevi. Da li je bolje da bude u horizontali ili vertikali?
Horizontal ti je bolje ako želiš DX radit..
Za krače relacije vertikalno
Ja licno koristim u Horizontalnoj jer mi tako odgovara za lokalni repetitor i ako svi u lokalu radimo sa vertikalnom polarizacijom. ja nisam imao aluminijum pa sam koristio bakar i odgovara mi zato sto mi je dipol pod krovom, imam dosta gubitaka samom tim sto je ispod krova ali zavrsava posao za koji sam ga pravio :) Znaci sve zavisi od tvojih potreba i zelja.
SWR?
1,04 : 1
@@cbradiokragujevac551 Thanks!
Show step four step
Je pense qu'un colier aurait suffit , superbe antenne que j'ai faite en alu , avec un petit boum et un réflecteur !
Quelle sont les dimensions des tubes? Merci
Mogu li staviti cijev fi 18 bez fi. 15 2.7m punu dužinu samo sa fi 18 ?? 73
Teoreski mozes ali dipol u zatvorenom prostoru se drugacije ponasa nego kad je na otvorenom.u prevodu drugacije rezonuje (zraci) samim tim mora da mu se nasteluje SWR prema okruzenju i preprekama. meni je trenutno duzina jednog kraka 2.57 za zeljenu frekvenciju 27.005 mhz i SWR mi je 1 : 1,04 .
Ive made this same antenna but from sewage pipe.
I made a similar antenna from aluminum tubing. Stands up to weather better than copper tubing (more rigid) and if buying the tubing from a store (I got mine from DX Engineering), it cost less!
I have one that has been up for 10 years now and still looks and works great! The only thing I did after assembly and tuning was to spray with clear automotive Lacquer, 5 coats! I also used Penatrox A on all connections and joints (prior to spraying) (the antenna is made from telescoping sections of tubing and is tuned by sliding the outer elements in or out like a loaded mobile antenna.
73, de N1WOM
Napravio sam sličnu antenu od aluminijskih cijevi. Podnosi vremenske uslove bolje od bakrenih cevi (tvrđe) i ako ih kupujem u prodavnici (ja sam nabavio svoju od DX Engineeringa), koštaju manje!
Imam jedan koji postoji već 10 godina i još uvijek izgleda i radi odlično! Jedino što sam uradio nakon montaže i podešavanja je da sam naprskao prozirnim automobilskim lakom, 5 slojeva! Također sam koristio Penatrox A na svim priključcima i spojevima (prije prskanja) (antena je napravljena od teleskopskih dijelova cijevi i podešena je klizanjem vanjskih elemenata unutra ili van kao napunjena mobilna antena.
73, de N1WOM
nice
Milliherz? 😵
You need a tripod.
What??
What?
English
Тези тръби са много дебели!!! Ще ти трябва тунер, за антената за съгласуване с предавателя, изходното стапало!! Така си мисля аз! Тръбите трябва да са железни или мед но с диаметър 5мм до 8мм.
Way to expensive. Poor design.. Use plastic pvc pipe with copper wire inside. Wood will rot and adds weight.
Hey Dave. Don't you think to start with he should put a reflector, 5% longer roughly 9' from his dipole and direct his signal? Then he could make a director 5% shorter and and put it 9' from the dipole element the other way and focus his signal a little more. I wonder which polarity he would choose? Remember Dave we all must start somewhere. Thanks Dave
Suggest starting with a dipole. Horizontal or vertical polarization. Use PVC pipe cemented into a PVC electrical box. Use copper grounding wire from the electrical box down the center of each PVC pipe. Install a feed line connector in the cover of the box. Trim copper wire for best SWR.
Start with the above, test and experiment and once comfortable add a boom with reflector and director with similar construction.
Hola
No entendí nada
😆
katastrofa. ovo je antena za one na ugljanu. mogao si i trebao si dati malo truda i napraviti kako spada. sve ok ali ???? drvo i vezice...hej .kad padne kiša ovo je u kratkom spoju a o vjetru da ne spominjem. ali eto bar imaš volje.