Thank you for your videos on snowglobe tumblers!!! I've tried before and gave up. After watching yours I tried again and made SIX!!! I used baby oil and ran out so used mineral oil. It's more expensive but glitter falls a little slower with it. :)
I wonder if putting a vinyl circle covering the bottom then drilling would help with the oily mixtures. Then when done with pouring in the mixture removing the vinyl to seal it. Have you tried that and if so did it work?
Thank you for the helpful video! Does the Elmer’s glue and water solution, does it evaporate quickly? I currently use 50/50 glycerin and water. But my tumblers seem to evaporate pretty quickly. Any tips?
Can you add more water to the glue mix if you want a bit faster flow? I made a cup with the water and glycerine and my glitter separated. I don’t like that?
Can you help…I made one with the vegetable glycerin and water but my glitter did not separate. They’re all stuck together in little clumps. Any idea what I did wrong? I did a 1:1 ratio.
Im actually kinda addicted with water glitter stuff like this but it's super hard to find a water bottle with double wall, which contain water inside the wall that sell in the market. I try to make it myself. But i can't seal it properly, and i don't know how to deal with resin too. Im desperate 😅
It's processed differently than bottled water (both are drinking water) but it's highly reccomened to used distilled water because of the way its processed (avoids molding)
Mini glue stick plug! GENIUS!
Thanks so much for this tutorial ❤
Thank you so much for this ! I’m always so undecided on what solution to make
Thank you for your videos on snowglobe tumblers!!! I've tried before and gave up. After watching yours I tried again and made SIX!!! I used baby oil and ran out so used mineral oil. It's more expensive but glitter falls a little slower with it. :)
I found this on tik tok and had to run and subscribe after following there. Ty so much for this tutorial!!❤
Aww thanks so much I appreciate you!
Thank you so much! Exactly the information I needed! Great tutorial
Thank you so much for doing this video I will definitely share it if anyone else needs help doing there cups.
Can you please advise how you would degas the tumblers? Thanks in advance!
Thank you this tutorial was extremely helpful.
Thank you! I’m just venturing into SG & having such issues with solutions.
Tip for the baby oil get a plastic Qtip cut off the ends and stick it in the little hole on the bottle and no more mess!
I wonder if putting a vinyl circle covering the bottom then drilling would help with the oily mixtures. Then when done with pouring in the mixture removing the vinyl to seal it. Have you tried that and if so did it work?
I put a sticker over it
Thank you 😊 great tutorial. Stay blessed 🥰
This video was super helpful thank you!! 💜
are those medium or slow flow?
Love this video!!! You just saved me money
Do you cover the hole when you degas for the glue/water solution?
I’m dealing with snow globe glass tumbler. The inside bottom popped off when i left in the sun. Should i leave a air bubble or no
Thank you for the helpful video! Does the Elmer’s glue and water solution, does it evaporate quickly? I currently use 50/50 glycerin and water. But my tumblers seem to evaporate pretty quickly. Any tips?
Hello I have enjoyed the tips! 😊what’s the best glitter to use?
Couldn't you mix the glitter in the solution before pouring it into the tumbler so the air doesn't get stuck in it?
You could try-- but trying to find a bottle or syringe to fit the glitter would be hard.thr bottles I use wouldn't fit
Do u put a layer of epoxy all over the cup to finish cup? The text u did was very helpful !💜
What is being used to wipe it down? Can I use 70% alcohol
if we want no flow at all, do we full all the tumbler of glitter or we should combined different types of glitter to achieve the no flow effect?
Check out my video on magic liquid!
Can you add more water to the glue mix if you want a bit faster flow? I made a cup with the water and glycerine and my glitter separated. I don’t like that?
Try adding water as well.
Does this ruin the non sweat purpose of the double insulation?
Yes
Can you help…I made one with the vegetable glycerin and water but my glitter did not separate. They’re all stuck together in little clumps. Any idea what I did wrong? I did a 1:1 ratio.
I found mine get clumpy using fine glitter so I just use chunky glitter mixes from michaels and I had no problems
Im actually kinda addicted with water glitter stuff like this but it's super hard to find a water bottle with double wall, which contain water inside the wall that sell in the market. I try to make it myself. But i can't seal it properly, and i don't know how to deal with resin too. Im desperate 😅
What do you mean by 1 part distilled water 1 part veg glycerin. Does that mean if I do 1 cup of distilled water I do 1 cup of veg glycerin ?
Yes 1 to 1 ratio means equal parts.
U proably could use a straw for the baby oil solution
Do you have to use glue?
I listed 3 options in this video 1 used clear glue 1 used baby oil and the other used vegetable glycerin
For the vegetable glycerin, you say “distilled water “. Is that different from regular bottled water that you drink?
It's processed differently than bottled water (both are drinking water) but it's highly reccomened to used distilled water because of the way its processed (avoids molding)
@@creativelyv thank you!
You said 1 3rds Elmer’s glue and 2 3rds distill water
Girl I don’t really think you’d do that.. but the initial thought was like 🙄🤔😳😳
Can you sell it to me please..
Custom orders can be requested through my insta or business email
@@creativelyvmay i know your insta? And how much the shipping cost to tokyo?
✌🏻✌🏻✌🏻✌🏻✌🏻✌🏻✌🏻🥰🥰🥰🥰
Use a funnel
It's personal preference I don't like it. But if you do that works