Should I join VLSI TRAINING institute | it's all about VLSI training | MUST watch for VLSI aspirants
Вставка
- Опубліковано 5 вер 2024
- Lesson-1 Why verilog is a popular HDL • #1 Why verilog is a po...
Lesson-2 Operators in verilog(part-1) • #2 Operators in Veril...
Lesson-2 Operators in verilog(part-2) • Operators in Verilog (...
Lesson-2 Operators in verilog(part-3) • Operators in Verilog( ...
Lesson-3 Syntax in verilog • #3 Syntax in Verilog ...
Lesson-4 Data types in verilog • #4 Data types in veril...
Lesson-5 Vector and Array in verilog • #5 {Error:check descri...
Lesson-6 Modules and port in verilog • #6 Module and port de...
Lesson-7 Gate level modelling in verilog • #7 Gate level modelin...
Lesson-8 Dataflow Modeling in verilog • #8 Data flow modeling...
Lesson-9 Behavioral Modeling in verilog • #9 Behavioral modelli...
Lesson-10 Structural Modeling in verilog • #10 How to write veri...
Lesson-11 always block in verilog • #11 always block in V...
Lesson-12 always block for combinational logic • #12 always block for c...
Lesson-13 sequential logic in design • #13{Mistake:check desc...
Lesson-14 always block for sequential logic • #14 always block for s...
Lesson-15 Difference between latch and flip flop • #15 Difference betwee...
Lesson-16 Synchronous and Asynchronous RESET • #16(MISTAKE-Read Descr...
Lesson-17 Delays in verilog • #17 Delays in verilog ...
Lesson-18 Timing control in verilog • #18 Timing control in ...
Lesson-19 Blocking and Nonblocking assignment • #19 Blocking vs Non Bl...
Lesson-20 inter and intra assignment delay in verilog • #20 Inter and intra as...
Lesson-21 Why delays are not synthesizable • #21 Why delays are not...
Lesson-22 TESTBENCH writing in verilog • #22 How to write TESTB...
Lesson-23 Multiple always block in verilog • #23 Multiple ALWAYS bl...
Lesson-24 INITIAL block in verilog • #24 INITIAL block in v...
Lesson-25 Difference between INITIAL and ALWAYS block in verilog • #25 Difference between...
Lesson-26 if else in verilog • #26 if-else in verilog...
Lesson-27 CASE statement in verilog • #27 "case" statement i...
Lesson-28 CASEX and CASEZ in verilog • #28 casex vs casez in ...
Lesson-29 FOR loop in verilog • #29 "for" loop in veri...
Lesson-30 WHILE loop in verilog • #30 "while" loop in ve...
Lesson-31 FOREVER in verilog • #31 " forever " in ver...
Lesson-32 REPEAT in verilog • #32 " repeat " in veri...
Lesson-33 GENERATE in verilog • #33 "generate" in veri...
Lesson-34 FORK-JOIN in verilog • #34 " fork and join " ...
Lesson-35 named block in verilog • #35 Named block in ver...
Lesson-36 TASK in verilog • #36 (MISTAKE-Read Desc...
Lesson-37 FUNCTION in verilog • #37 (MISTAKE-Read Desc...
Lesson-38 WIRE vs REG in verilog • #38 Wire vs Reg | when...
Lesson-39 FSM-MEALY state machine in verilog • #39 Finite state machi...
Lesson-40 FSM- MOORE state machine in verilog • #40 Finite state machi...
" Should I join VLSI TRAINING institute " it's the most confusing thoughts to a VLSI aspirants and a B.Tech or M.Tech freshers. Many freshers are not sure whether to make a career in VLSI field and if they want a career then how should they achieve their passion or pursue the love for core Electronics.
so if you want a career in VLSI field and you are a freshers and you have a thoughts of joining VLSI training centre, then you must watch this video till end. After watching this video , all your confusion will be vanished.Enjoy this insightful tutorial about VLSI TRAINING centre.
Do LIKE, COMMENTS and SUBSCRIBE 🔔 this channel.
It's absolutely true. Thanks for sharing such a valuable content . A must watch for all freshers , planning to join VLSI TRAINING.
You are doing a wonderful job for VLSI job seekers. All your contents are superb. This is the best VLSI channel in UA-cam and to my knowledge it's the only channel which gives knowledge about VLSI field. Thanks a lot.
Thanks for all your inspiring words
Really ,a must watch for all. Thank you so much. Thanks for making such a wonderful content.
Genuine guidance and training in front end - verilog uvm systemverilog - Semi Design
As u said sir that if u didn't got placement in VLSI after joining courses, same thing happened with me that all my course mate got internship due to no placement. I was taken courses in MOS chip institute.
Wow, never thought about this.its very deep.Thanks
Many many thanks for this knowledge. Very helpful
Sir what you said is definitely true but I want to know one thing the big tech giants in HW industry such as Qualcomm or Intel mostly selectes from big IITs and nits so doing mtech may be worth on condition they are from top iits and nits
As I don't think these vlsi training institutes directly have their placement assistance to the companies such as Qualcomm or Intel
Yes,you are absolutely correct. But if someone get placed through vlsi training centre placement then after 3-4 years they can easily move to companies like Intel, Qualcomm and may be with the more package than a m.tech students from IIT or NIT.
Few companies do outsourcing their employees(while they are freshers) to companies like Qualcomm,Intel after giving 3-4 months training means they will go to these companies and work there and not in the parent company.
Joining small company has its own advantage and prepare someone for something big.
Thank you for infirmative video brother, please suggest the course which is better either in front end or back end...
And also suits to female.
Both front-end and back- end profile are for female and male. So you can choose either one without worrying much. Try for a company having great work culture.
Front -end itself is very big profile. You can watch my front -end video to know more about it.
Hi,
I have 6 years of teaching experience as assistant professor in Electronics and communication department. Because of personal reasons I quit my job in 2018 and since then I started business in non technical field . As an assistant professor I have always loved teaching electronics subjects and now I really want to get into VLSI industry. I am interested in physical design, I was thinking of taking up course on full custom ASIC design. It's quite expensive.. Is it worth it? Or do you suggest something else? I am 36 years old, currently placed in Bangalore.
Thanks in advance.
Hello,
Glad to hear, you believe that you deserve better.
You can enter vlsi industry if you have someone known who can give you reference or through campus drive or walk in.
VLSI training centre might give you an opportunity but it's not 100% sure. So even if you want to join then make sure ask all your query as you pay a lot of money. Your teaching experience will be a biggest advantage for you if you get a job interview.
Today's VLSI industry is more like a software job means they follow software culture. It's no more a special job( as it was few years ago) because this market has been saturated in India. What I meant is one shouldn't regret coming into this vlsi domain thinking it's different than other job. But yes, it's true that future is very good once someone get experience, but only for hardworking individual.
Full custom Asic is a very good option but in India it has very less opportunity and again freshers usually don't choose this field.
System verilog based verification has more opportunities than other field in India but physical design also a good option but only when you do this course from any branded training centre.
Thank you so much for your response 🙏 I appreciate your commitment..Will get back to you for more details..
Your videos are of great help..Keep up the good work 👏👏😊😊
@@poori85
May you succeed dear....
Did you take any VLSI training from a institute?
Sir, I'm 2021 btech passed out (eee) with percentage of 54% from tire-3 collage . I have full interest in learning analog layout, is that a good career option for me do I get a job after learning analog layout 🙏
Yes. If you get proper training and do hard work then definitely you can get a job in analog layout field. Your love for the subject interest is more than anything. Analog layout profile can provide you a great career option if you develop interest in it.
Thank you sir 🙏
Thanks for the information. It was very helpful.
Sir I can get vlsi mtech in lower mid NITS. How should I study for design verification job.
I know that C/C++, one scripting language, verilog, system verilog, uvm and amba.
Any suggestions?
Honestly speaking, Verification is not exactly a vlsi hardware related job, it's pure vlsi software job. It's more like software coding.
If you get vlsi job from campus placement then the job that will be assigned to you is random. It may be Verification also.
If you try outside college campus then you can get in 2 ways
1) through reference, if someone is working in verification
2) vlsi training, only in reputed institute.
As per information you provided, you have basics knowledge to get verification job. It's enough. During verification job interview they expect freshers to know digital logic concepts, most important is FSM design, System verilog is a great advantage, C++ is bonus. These are the concepts they expect from you, nothing much.
So what you need is a opportunity.
NITS brand will help you to get a job/internship.
My last advice is don't be so choosy that you want only verification job. Whatever profile you get just accept it. If you really want verification job then after joining any company you can very easily switch to that job.
Which specialization should I choose...
1 vlsi design
2 microelectronics and vlsi
3 embeded
If it's IIT or NIT then Microelectronics and VLSI design
else
Embedded
Either prefer to do mtech or vlsi training institute after 6 year gap....
Sir I persuade my btech on 2013 and I got married all these years I am idle like homemaker can I join for vlsi course to kick started my career one of my friend told he will be offering the job for sure but I am confused whether I can able to learn the course or not pls do reply sir
You can enter vlsi industry and your B.tech passed out year won't be a problem only when you prove your worth during interview. If you think you deserve better than you attact it.
Fill your year gap with knowledge, positivity,self motivation etc.
you need to work hard, learn basic concepts like verilog coding, C , digital logic design, whatever your area of interests are. Prepare yourself.
If someone is providing an opportunity then you must respect it and work for it.
It's not about the opportunity but it's all about your attitude towards learning new things, explore possibilities, doing hard work and achieve your goals.
VLSI industry provides a great career for hard worker, self Learner, knowledge explorer. Hope you are one of them.
Today's VLSI world is more like software field. VLSI job culture is more like software job culture. So vlsi is no more special but it's just another type of job available like any other job.
So be sure what you want and how you see yourself in the near future.
You are most welcome to ask any query you have.
All the very best.
Sir 12th mark is around 56 percent so how much it affects for placement, Acdamic marks is 60 percent >. Sir please reply 🙏
There are many companies who don't bother about your marks except your knowledge. But yes there are companies who ask for min 60% but these are the not only companies.
This is also true that people regret scoring less marks in 10 and 12 when you are better than others but being rejected only because of marks. So have patience and work hard. APNA TIME AAEGA.
So my suggestion would be replace your 12th percentage with your knowledge or experience so that you will be judged based on your knowledge and not marks.
Once you get min 1 year experience no one will ask you marks again.
@@ComponentByte thank you sir for reppy are the best consular. Thank you very much sir .
sir is writing gate exam and doing mtech or directly from btech we can prefer vlsi training which one is better ??does clg matters for getting job or skills??
Except in few new IIT and few NIT and some premium institute, pursuing M.tech VLSI is just a degree, no or less placement. So my suggestion would be - go for a vlsi training if you are financially stable and if you have patience and if you are a hard-working individual because vlsi job requires lot of learning and hardwork.
@@ComponentByte Thanks for your information actually i am in btech 3 rd year i want to do some ground work in vlsi and embedded systems that is useful
Embedded system will be useful for both vlsi and embedded career because coding skill is essential for both types of job
Thank You Bhai!!!
Welcome. Wish you a happy learning.
Hii sir please suggest me a good VLSI center in noida ....
To my knowledge it's CDAC Noida and DKOP LAB. Thanks.
Sir I have 2 qns...
1. I'm in 4th yr of my b.tech ece and planning to take a drop for gate...so which will me more benificial?? Gate or training institute?
2. Is there any good institute in west bengal??
1. Gate is all about your belief (but not over confidence) on yourself whether you can do it or not . It's only possible when you have strong determination with not ignorant of pros and cons. If you go for GATE , you must know other side of story also like GATE success rate, what exactly you want from it whether job or m.tech, if couldn't qualify then what ? How much time you can spend for it ? you must have back up plan. I am not scaring you but I am telling the truth which many ignore. I am not against GATE because I myself has done my M.tech after GATE Exam.when I qualified that time it was only for M.tech and never for JOB. For me, GATE is a kind of rat race which many run after.
If you are financially stable, have a dream to achieve something great academically or can crack IIT M. tech. then go for it.
But if you are not interested at all in higher study and don't want to spend more time to get a job then you can go for VLSI or embedded training. Work hard and you may get a job. Most of the M.tech colleges teach garbage in M tech except very few.
2. To my knowledge no training centre in West Bengal. You have to go out to places like Bangalore, Hyderabad etc.
@@ComponentByte Thanks a lot sir...it was really helpful for me...
One more qn is there any vlsi based company in bengal?? Where can i join after gather some experience from other companies?? Or join as a fresher...?
I'll looking for yr ans sir❤
Sankalp semiconductor is a very good vlsi company based in west bengal. They sometime recruit from small reputed institute, few years back they were even conducting Off campus for B.tech freshers. You need to explore a little more about it.
@@ComponentByte Thank you soo much sir..🤗❤
Sir I completed my b.tech (electronics)2020.i was weak in basics subjects which is reason for not qualifying gate though I attempted 3 times ,if I take vlsi training would tell from basics and what are chances of getting job if vlsi training was take?
If you take VLSI training and if it's RTL design( or ASIC DESIGN) or verification then they will teach only basics of digital electronics and may or may not about CMOS Design. These knowledge you might have already. So don't worry about subject , any one can learn. But the important part is Coding skill which someone has to understand the flow and practice it to master it. Coding is a skill and a skill can be developed with constant practice. GATE demotivates many and GATE is not all. Beyond GATE there is a beautiful experience. if you put little hardwork in VLSI training and if the training is from some reputed organization which provides placement opportunities then no one can stop to get into VLSI field.
Sir, Is DKOP labs good for training and placement? I am ece graduate (NITK) 2020? Should i consider their job oriented training in vlsi ?. Please tell .
Sir u am btech 2017 pass out in ECE I want to join VLSI training center plz suggest me sir.....
it's also very important to choose a VLSI field like verilog, System verilog, analog design, physical design etc than to choose a VLSI training centre.
My first preference is always CDAC(govt).
Next are NIELIT CALICUT(govt), veda IIT,maven silicon,rv VLSI . These are few names famous for VLSI training.
But my suggestion would be before joining any training centre visit the training centre and get the details like placement opportunities, if you have any academic related issues like B.tech percentage,year gap etc. It's far better if you somehow manage to talk with the students of already undergoing training in the centre(As you will be paying a huge amount of money, it's better to ask all your query to training centre). No training centre can assure you 100% placement so choose wisely.
There are many many small training centre, may be they are best interms of teaching but due to their marketing strategy many don't know about them. One such is Nano CDAC Hyderabad (it's not cdac) and many in Bangalore City.
Finally, it's your hardwork and curiosity to learn new knowledge that helps you to get your dream job. Definitely , training centre helps to achieve it.
Sir
Can you tell me top 10 VLSI training Institutes with best teaching and placements in Bangalore
Hey bro I am selected in IT industry, i have wish to pursue my career in VLSI. I don't have enough money to spend after completing one year gap will getting into institutions will I get placed in vlsi companies?
1 yr gap will never be a problem.
Join IT industry and if possible after some time, take vlsi coaching on weekend or in your free time or after working in IT industry for 1 to 2 year, if you will have desire to join vlsi industry then you can leave IT field and permanently go for VLSI. if you have any friends you can ask them for VLSI job reference even after having some experience in IT industry.
you must be financially stable before taking further decision so my suggestion would be join IT industry and have some experience.
@@ComponentByte i have not completed my college yet, i was rejected at final interview of validation in microchip and verification in ignitarium!!!.
I am praying i hope I will get another chances. That's why I am studying your content here!.
Got it.
Then definitely you have great chance to get a VLSI job in near future.
Try for vlsi job , anyhow you have backup of IT job.
My suggestion would be, don't be choosy means don't force yourself for only VLSI job and don't even think to leave IT job for the sake of vlsi job training . Try for it till your IT job joining date comes.
Bro....i passed my btech in 2015 and worked for 3yr as industrial automation engineer...but i want to switch to vlsi....can i get a job in backend after my completing vlsi course..??
Yes. If you do VLSI training from reputed training centre and the center provides you the placement opportunities and if you crack the interview then definitely you will get a job. What I mean is your 3 years experience will be counted as your strength and only thing they might ask is why you need to change your job profile and if you explain them successfully then they will check your VLSI subject knowledge and now you have to prove yourself that you deserve to be in VLSI Industry. Hope you got it what I meant. So yes you can get a job in VLSI industry but with your hardwork . Wish you a happy learning.
@@ComponentByte thanks alot.... I'm too much interested but Financial situation is too bad so can't even think about this
What all knowledge we shud have to get placed in vlsi company?
It depends on the job profile you are looking for and their requirement.
If it's digital design then one must know basic digital electronics knowledge, verilog, FSM , FPGA
If it's verification field then System verilog, digital knowledge, oops concept.
If it's analog field then analog Electronics, CMOS, transistor, capacitor etc.
So it depends on what the specific company is looking for.
Thanks.
Thanks for sharing much need of this topic ❤️
Could u tell me which is best centre in banglore for VLSI offline training
Thanks you so much bro ❤️🙏
Welcome ! Wish you a happy learning and a great career.
Does stammering matter in placement after doing courses from these institutes.
Absolutely No. If attitude/knowledge dominates over stammering then no one can deny a job.
Please answer my question I have civil engineer graduate can I entered VLSI field
Yes and NO.
No , because you are from CIVIL branch and company won't allow civil students for VLSI job.
Yes, if you have very good reference. If someone is ready to offer you job and the condition is you must have VLSI related knowledge which can be earned from VLSI training centre or from any other sources.
Thanks.
Very informative!👍
Sir i got placed in a semicunductor company as s FAE.. i want to be a vlsi engineer....how can i switch from this company to another company..
If you have not gone through this link then please once read it. Then you ask me what exactly you want and I will definitely answer.
www.electronicsforu.com/career/field-application-engineering-technical-sales/2/amp
@@ComponentByte sir what should i do after joining as a FAE in semiconductor company for my best carrer growth....plzzz suggest
One can have great career as FAE than VLSI engineer.
FAE gain more product related technical knowledge over the year.
If you want to remain as FAE then
Try for product based company like NI,AMD,KEYSIGHT,XILINX etc . Here salary is very good with very good chances to go up in position but there will be frequent journey to visit different places for your company products. You can even become technical manager of the company .
If you want to change to vlsi engineering work than you have three option.
1) search for new jobs with your FAE experience.
2) as an FAE when you visit different technical places, make good connection with the person you will be dealing with. If you help them to achieve their job then they will definitely help you to achieve yours. A great connection is the best source to get a VLSI job. Sometimes you will be having more knowledge at particular things than VLSI engineer.
3)As you will be part of some technical place make sure you know the people very well where you work. Believe me when you are technically sound even your own company won't deny a job when there will be vacancy for vlsi engineer. So make good connection both in your own workplace and the place where you will be visiting .
The best part is, after few, say 10 to 15 years of experience in VLSI domain, vlsi engineer becomes a technical manager. So they just manage engineers and they mostly don't do engineering work same like FAE.
One guy , passed out from BITS Pilani, working in NATIONAL INSTRUMENTS as FAE was visiting the place where I was working. He had a very good technical and communication skill. His salary was very much than my project manager.
So work as FAE till you get new job or if you like than continue it .
Hope it helps.
@@ComponentByte thank you sir ....very useful reply by u sir .❤loved to watch your channel .
i am 2020 passout, and i have a gap of 2 year, during which i was preparing for govt. job but now i want to join a VLSI company through training. My question is will 2 year gap can cause a problem in placement because i don't gain a experience or any certificate during this years. Would i fit in placement criteria for company.
Your 2 year gap won't be a problem but they will ask you the reason for your year gap and if you will be able to handle the situation that time then you win for sure. Tell them you were preparing for GATE and everything will be OK. But try to learn as much as vlsi knowledge as you can and with this knowledge you can fill your year gap. So don't worry , concentrate on maximum learning and you will be always on safe side.
@@ComponentByte thankyou 🙏
Will maven Silicon will be good for VLSI training?
Most probably MAVEN will provide a job interview to it's training students. This job opportunity is more important than a job. Some may not get training opportunities for various reason. So yes , if MAVEN is providing placement opportunities then it's a good VLSI training centre.
VLSI training centre are evaluated not on its quality of education but it's placement opportunities
exactly same situation. Did you join in any training ?
Thanku sir,
I request to you plese provide roadmap of vlsi,and suggest for where i learn vlsi bcz my state not have a vlsi institute,i am hungry vlsi design and try take some nptel couces but nptel not give industry level knowledge 😅,at a time i am b tech fresher ,plese help me🙏🙏🙏🙏
Definitely I will help. I have created this channel to share my knowledge and help freshers, so they don't take wrong path. If you want you can send your mobile number to the given email id and I Will call you when I will get free time so that we can have small conversation.Thanks.
email2vesystem@gmail.com
Sir I completed BE electronics , I learn VLSI course, which institution best and 100% job placement, because , if any fresher training job plz tell me sir, I will do
CDAC is always a best option for VLSI training. You can explore more about other training centre like MAVEN SILICON, VEDA IIT, NIELIT CALICUT.
Kya bade bade companies bhi VLSI training daykar job deytay hai kya
No. Whether it's big or small company they won't give training (except those take money and give job). If someone doesn't have VLSI knowledge then he or she won't attend interview.
Which is the best training institute..pls guide...for online purpose...as offline classes are in Bangalore and Hyderabad only
Maven silicon provides online classes . No idea about others.
But I will never recommend online vlsi classes to anyone.
Bhai , can you give me your Instagram I'd or LinkedIn connection?
I want to discuss something!
Sir, i want to work in vlsi field. but i have completed my PG in 2013.. its long gap..
how can I enter into this field... what r the knowledge I should develop.. is it possible to work in this field..
Yes, it's possible to work in vlsi field. But knowledge like verilog coding, basic of C is always advantage, digital electronics knowledge is must. These requirements are for RTL design job
But if you are interested in analog vlsi design then analog electronics knowledge is must.
If you choose verification field then system verilog and C++ is must.
So different vlsi fields like DFT,LAYOUT, PHYSICAL DESIGN,MIXED SIGNAL DESIGN requirements are different .
If possible join any vlsi training centre which offers job assistance because off campus placement is almost NIL.
So first choose the field that you want to work in.
Thanks
Aap detailed explanation nahi Kiya hai about if I'm gonna join institution for career. I'm in similar position, someone guided me to join in this for career. Should I join. Is it worth it or not
Sorry, didn't get your query.
@@ComponentByte I'm a EEE graduate and my distant relative advised me to join in a vlsi institute for a good future. But I'm confused if I'm interested in that domain or not.
.
You've mentioned in 2:54 that to join a vlsi institute if I was passionate about it. But what if I join a vlsi institute only for a career/job ??
There are many who join VLSI coaching center just to get a job. Yes, you can always join and once you start learning either you will choose this as a career or regret having spent money and time. This is the truth. Hardly 1% b tech graduates know about VLSI technology just after their graduation and rest simply join coaching center like joining GATE coaching center because your friends are joining. So don't worry. If you are financially stable then you can join VLSI training centre and then work hard and get a job.
As you are from EEE background so better ask coaching center if you will be eligible for VLSI placement after training. I am not sure about EEE branch.
@@ComponentByte my distant who did vlsi training & advised was also a vlsi grad. And I've enquired from other institutes and they're accepting EEE graduates. thankyou for solving my query sir
Sir which institute is better for learning vlsi course in budget friendly?
There are 2 criteria.
If only interested in vlsi course and no placement then one may find many vlsi training centre with affordable price.
If want placement then definitely they will charge a lot.
1-Some time back vlsi guru was offering vlsi course in affordable fee.
2- check Nano CDAC, Hyderabad Ameerpet
Hi. I am 2020 passed out. Presently I'm working in an MNC company having 1 year experience. Planning to take vlsi training to enter into vlsi field. I'm a Electronics student. Suggest me that Is it a good idea to enter into vlsi field?
If you are financially strong then you can move. If you love your present job then no need to join vlsi as vlsi and software work culture are almost same.
If you don't know anyone in vlsi industry then it's hard to get vlsi job so it needs lot of patience and frustration(so you must be financially strong to support your family)if you do vlsi training and don't get placed(off campus drive is rare in vlsi industry). If you get placed through vlsi training centre placement then you are a lucky one (but once you join vlsi company you have to work hard and love your work to grow. It's so true that vlsi experience will no doubt gives you a great pay package and hard work is must in VLSI industry and deserving person can only survive in this field)
Now, yes , if you join any branded training centre and work hard then you can get vlsi job. But as you have a job so you need to think for a while to leave it as getting job these days are hard and that also vlsi job . I always recommend vlsi job to freshers (as no other option)and working people who doesn't like their job and if they are financially strong as we all know not getting placed after vlsi training/ mtech vlsi is big frustration and this may consume your time .
I m not scaring but this is the reality.
If are planning to join then visit that vlsi training centre and get all the details like placement opportunities and quality of teaching , have a chat with students undergoing training and then decide. All the best.
Thank you very much
Is MosChip Institute of silicon system is best to learn design verification course?
I have heard it's good for vlsi physical design. Please be sure to join only after visiting the place and better to have a conversation with ongoing verification trainee to know more about it. You have other option too
Hai sir.. I completed mtech in Vlsi in 2020. I'm very passionate to enter into vlsi field but there is less opportunities for fresher. I can't afford to join any coaching institute. I'm good at digitals, c , verilog HDL. I took online course on Digital methadalogy from maven worth 5k. Please suggest me what to do
First, join LinkedIn if you have not. Make good profile on LinkedIn and make connections. Make your skill visible to people working in VLSI industry.
Second, make a great CV, send CV to companies , even to startup. Most important is your patience. So keep sending and wait for the response.(many VLSI related companies are there in india)
Third, many times VLSI training centers also provide job opportunities like project trainee or lab assistant , if you find any, without thinking apply for it(CDAC,NIELIT are such two govt.organization)
Fourth, Apply for internship and not job . Mention in your mail that even if it's internship then also you are OK. Means you want experience and not money minded.
Fifth, if you get opportunity for company which is not exactly VLSI but related to it like PCB, Embedded then also join, because after experience you can always switch
Sixth, Don't stop learning, update your knowledge as per VLSI industry requirements.
Hope it helps.
Wish you a happy future.
@@ComponentByte firstly thanks for your kind reply. Yeah sir I'm in linkedin..I am make sure that I will follow all your valuable suggestions.
Sir, 🙏I'm really in need please help me.
I have 5years exp in software testing. I want to shift domain to VLSI. Can I take up CDAC VLSI course and do it ? Will I get placed. Please help me. Planning for 2023
Yes, definitely you can write . Your software job experience will help you during job interview for sure.
If you can qualify CDAC entrance then definitely you can crack vlsi job interview also. But your year gap might cause you a little problem as few companies put criteria like passing out year. But not all companies put such criteria.
Sir which Institute is good for VLSI?? Please suggest me.
CDAC,
Maven
Veda IIT
It also depends on the the course you are interested in.
Sir what is the fee of best training institute .
around 70k , may be more.
@@ComponentByte sir I heard 1.10k in karnataka 😔 sir for ofline ,sir ye fee jayada nhi hai sir aap reply Karo
1.10K or lakh
Sir can you please tell me about vlsi best training center in Hyderabad ..nd also a doute for girls it is good job r not ..nd in VLSI how many courses are having which is best for girl ...?
Hope you know that the first programmer in the world was a female. So nothing such as girls or boys type of job. Girls are equal to boys in any job. So don't worry, VLSI job is for all. You can choose any field such as RTL or verilog design, verification, physical design,analog design,DFT,STA, TESTING etc. based on your interest. So finding and knowing your interest is more important than anything.
In Hyderabad,
CDAC is best(It has 2 branch in Hyderabad, in Ameerpet and one near Charminar)
Veda IIT
Institute of silicon system(Madhapur)
Nano CDAC(Ameerpet)
There are many, if you explore you will find.
But my suggestion will be if you are from Hyderabad then once visit those places, talk to them about placement, course fee, if possible talk with students taking training and if satisfied with everything then join.
Hyderabad is also very famous for embedded system training, incase you have other option.
Thanks
Sir I am from Hyderabad and one of the vlsi training with 100% placement bolo rahe hai aur bola rahe hai 14 year se hai how to know whether the training institute is true or not pls guide me
May I know the name of this training centre ?
If any vlsi batch is going on then go and ask those students about the quality of training and about the faculty also and you will have lot of idea. This is the best method.
Ask them previously visited company name.
@@ComponentByte sir the name of the institute is Vedic school of technology ok sir I will ask to the ongoing batch students and they also tell us that it will be like a school they were not allow the students who has not completed the previous model if they completed then they will teach them the next module thx alot sir
Same happning in MAVEN SILLICON LAB mentors are freshors
bro can i join in maven
Sir any training job plz tell me, I'm completed BE electronics in 2020, ,
No training institute can provide you full placement. It's their brand value and your hardwork which helps you to achieve your dream. Some training centre are CDAC,MAVEN,NIELIT CALICUT,VEDA IIT,RV VLSI , CVC Pvt . They have their pros and cons. So now find out which one is best for you as per your requirement.Thanks
Can I take maven silicon for online course? Is it beneficial?
I don't recommend anyone for online VLSI training unless someone is a working individual and she or he has strong connection in the vlsi industry to get a job .
Sir, I have completed my M.sc in Electronic Science in 2020.I really want to grow my career in the Vlsi field.In my state there is no such vlsi training institute. So,if you guide me what institution i should choose and how to go forward in this field it will be very helpful for me
If you want you can write GATE exam and then m.tech (and then PHD).its a best option only if all your circumstances support you.
You have option like joining govt. Places like DRDO,CSIR lab etc as JRF,SRF(they do VLSI project) and then VLSI company.
There are so many VLSI training centre but the one which provides placement and has brand value should be your first preference.
If govt organization then CDAC,NIELIT
If private then VEDA,MAVEN.There are many more(rv VLSI, silicon system,nano CDAC,VLSI guru etc). you have to explore which one is best. If you explore you will get more information.But I will always go with CDAC or NIELIT if I want to learn with placement opportunities.
choose wisely after long research and not in emotion. Again it depends on which VLSI field you want like RTL, LAYOUT, PHYSICAL DESIGN, VERIFICATION,DFT,ANALOG,MIXED SIGNAL.
At the end you have to decide . Hope it helps.
Thanks.
@@ComponentByte CDAC or nielit are best options.
It depends. NIELIT has one of the best VLSI and embedded lab. They have experienced faculty. They also provide m.tech through gate. But placement wise it's always CDAC . Because CDAC is a brand (it has good faculty and lab too). Many don't know NIELIT because of its location. There are many place where NIELIT is but the best one which provides VLSI training is Calicut, kerala.so location and brand matters a lot during placement.
CDAC also has many branch and not all centre provide placement. So one has to find the details about placement and quality of teaching before joining.
But I would go with CDAC (Hyderabad) for placement.
Where are training institute
Sir
Doing this training is easy or going to abroad and taking this course
So which study will be having more value
Vlsi training are on very specific field . Training gives you the entry pass to job opportunity. But truth is M tech courses are very different than what vlsi training centre teach you. Verilog is never taught or hardly taught during M.tech but you will have lab but training centre provides this course.
Physical design is completely different in training centre and M.tech will teach you algorithm while training centre students never heard about it. They learn just basic to get a job.
STA in Mtech and training centre are different.
VLSI DSP is never taught in training centre but in m.tech only
Analog design course is different in training centre and M.tech.
Verification is never taught in m.tech.
So what I am trying to tell is m.tech or ms is very much theoretical and research oriented. After m.tech If you get a job then you can Excel but
Vlsi training centre provides knowledge which is very specific and trains you to get a job without even teaching the core knowledge or real vlsi concept.
So for me higher education is more valuable than vlsi training only if you have patience and eagerness to learn.
If you are after job only and no motive to do higher study then vlsi training is best
If you are financially strong and want to explore knowledge then you can definitely go abroad. (people go abroad for PHD in VLSI field and it gives more value to their profile) so choose wisely.
@@ComponentByte thank you sir
Is MAVEN SILICON good VLSI training institute?
It has created its brand in the VLSI field over the years. The good thing about maven is many has taken training from this centre and have been placed with their hardwork and as they are part of some VLSI company so where ever they work, at least those companies know the name of MAVEN SILICON. So existence of maven is well known to VLSI job recruiter like CDAC. it helps maven to get VLSI companies for their placement. This is how VLSI company visits maven for placement. Maven provides you the opportunity and you have to work hard for that. Here I never mentioned about quality of training. Because that thing you can learn from internet with the help of tools provided by training centre. This doesn't mean they provide 💯% placement. There is always pros and cons. Hope you understood.Thanks.
@@ComponentByte thank you so much❤️
It is hard to take decision in life for engineering student
If you are a fresher (4th year ),then you mustn't be choosy means you shouldn't have the mindset to go for only one kind of job unless it's IAS,IES. Like so many are aimlessly preparing for GATE, they even prepare for 4 to 5 year without having any job. So these people are choosy( If you can't think beyond you will remain in the system)They simply end up wasting their valuable year thinking, end will be better but believe me end is almost same for all of us . you become happy when you make your life easy and grab the opportunity that comes your way.
If you are not meant for the job you are doing then definitely you will look for other and then another and this process continues until you you like the work you do or you do the work that you like.
If you realise at some point of your life that you deserve better then you will work for it. Even your previous experience will help you to find your dream work by providing you enough skill .
I believe, guidance is most for all engineering students.
Hello sir do you have any idea about this possibility technology they are providing VLSI course training, is it worth to join there?
Hello, never heard about it. Can you please provide me their website if they have any ?
Every branded VLSI training centre have their own website where they show their course details, placement etc.
Bhut bura laga raha hai or shrm bhi aa raha hai khud per, kyuki mere sath same to same hua hai but industry different tha.
Brother is it okay with joining with maveen silicon
Please give best answer .
I have heard many good reviews about maven . I have also heard bad thing. Maven is brand name and this name provides you job opportunities.At the end what matters is the job opportunities and if maven is able to provide that opportunity then there is nothing wrong in joining maven. Rest is your hard work matters. But again, do proper research before joining instead of the reviews received on Google. You should better contact someone who has undergone training in MAVEN so that you will get to know more about the quality of teaching.
Can you shed some light on gap years during placements..?
VLSI companies mostly don't mention year gap while give job notification so it's won't be an issue. But yes during interview they will ask about it. But again it doesn't matter much to them as they are interested in your VLSI skill and not the year gap. If You have year gap due to GATE coaching , lectureship, or any other job then it's an advantage but if you have done nothing in those years than try to fill your year gap with your knowledge. So don't worry about year gap much, your skill matters.No one gets rejected due to year gap.Thanks.
@@ComponentByte sir, what if the gap is almost 10 years? Will it make sense joining training institute?
Training centre always set criteria during placement to eliminate candidate so they won't be asked by candidate for job placement. But with 10 years gap,only one way to enter VLSI industry is to have a strong reference. If you have someone close in VLSI industry then you have more probability to get into VLSI or you must have a background like IIT,NIT degree. If you want to join training centre then better talk with training people and see their reaction.Hope it helps.Thanks.
Bro I am a diploma final year student. Is it possible to do private btech while doing training in Veda IIT..??
What is the length of the course of VEDA IIT.
I want take a vlsi course which are best institute now plz tells about this
There are many different type of vlsi courses . So which one you want to pursue ?
Sir ,is star vlsi banglore institute is good to join in physical design?
I have no much information about starvlsi. I tried to find out in Google but couldn't find proper information. Their website has some information regarding placement but one cannot assure about those data.
So my advice will be , please visit that institute, meet with people undergoing training and get to know what you want to know. This is the solution from my side as I can't say bad or good about some institute if i don't have any information.
Thanks.
Sir,Is Sumedha it a good training institute for VLSI??
I have heard about it but not sure about it's placement history. If you are from Hyderabad or near the city then the best thing you can do is to visit sumedha IT and have a chat with vlsi training undergoing students and they are the one who clear all your query regarding its courses, materials and placement. Thanks.
Sir kya Bachelors of Engineering vale students VLSI training kar sakte hai? ya sirf B.Tech/M.tech vale students?
Yes, kar sakte hain.
hello sir, I'm a final year ece student I am planning to do design verification in VLSI which institute is best in that can you suggest that institutes in Banglore placement is very important for me so please suggest for that too
Maven silicon.
Many (but not all) has recommended Maven silicon for design verification. They have also good reputation to provide placement. So you can consider it
Is it good for Online Classes....They are telling me to do Saturday and Sunday Classes @@ComponentByte
@sunilkumardas1662 The choice has to be made by you. If you don't have any problems learning things online and if they are providing a better online system where you can learn and ask your doubts then I think it's not a problem.
Bro is Sumedhait institute is good in Hyderabad???? Because it works on Pay after Placement!!!
Sorry, I have heard but no nothing about this institute. But if it's really pay after placement then definitely a good option for freshers even if it's not a branded one.
@arav singh I have got admission in Sumedha in pay after placement but not able to decide should I join or not because I have no knowledge of sumedha.
Have you got the Addmission Or know something about sumedha so please let me know.
@@mohdnasir2554 can u plz tell me is sumedha it good
Hi Bro
Can you help me out in suggesting some good institution in bangalore for vlsi design and verification
But yeah I want offline institution
There are many but MAVEN and RV VLSI are well known
Sir maine rgpv bhopal se ET branch se 3 year diploma pass Kiya hai to sir mere liye carrier options kya hai please help me 🙏🏿
Diploma students have more opportunities to work in PSU than B.Tech. NTPC,SAIL etc recruit many diploma ET with great salary. But I am not sure about present condition. Few years back the above information was true.
I am providing a career option, please explore a little.
There is a institute in Bhubaneswar called MSME Bhubaneswar. It's central govt. They provide practical training to students from class 8 to B.Tech. This is one of the best place to learn about industrial knowledge. It's admission process is first come first and completely free for SC/ST students. They have hostel facilities too.They also provide placement.
- Else join any technical job even salary is less. Learn the skill and earn more at later phase. Don't go after money , go after knowledge and skill.
- An electrician earn more than a Normal B.Tech guy when he is skilled in city like Mumbai.
So what I am trying to say is learn the practical knowledge and you will have a great career.
Thanks.
@@ComponentByte thankyou sir 🙏
@@ComponentByte' vlsi for all ' online training is worth ??
Online classes for some specialised topics are worth and it must be of short duration(even online software courses is a good option ). But one should not do online training for verification, physical design,RTL design, analog etc. Physical interaction with teachers is best way to learn anything. Interaction is must for VLSI courses.
sir suggest some good vlsi centre in chennai ?
There was a training centre called NIELT Chennai. Now I doubt it's existence. Most prefers either Bangalore or Hyderabad or very few NIELIT CALICUT. so there is no branded VLSI training centre in Chennai I think. So either join best or don't join.
pls make hindi vedio series on vlsi industry tools sir
If it's about explaining VLSI tools then it's not possible because tools are very very costly but if it's about explaining the tools i.e simply its uses (theoretical) , what tools are used for different vlsi work then I can do.
@@ComponentByte sure sir pls do thank you in advance and pls make some vblogs on paid internship programs wfh for students
Hi. Is there any online coaching on vlsi, pls suggest the best one.
Don't waste your time and money on online VLSI training. It's won't help much. Google and UA-cam content are better than online VLSI training if you know what you want to learn and why.
tqsm. Can you pls tell if any youtube chhnl having quality classes you know the best? and any intitutes in Hyderabad? but as of now i want to learn from home itself bcz of this pandemic situation.
Can you please tell me what you want to learn.
vlsi
VLSI includes many things. VLSI is not a isolated term. It includes device physics to chip fabrication. VLSI is a technology and not just a course that people study.
So what I mean is a there is no such thing called VLSI like VLSI Engineer doesn't exist .
So choose a topic , let's say timing analysis. Then learn about it from internet. That's the best option.
When you follow many sources you will find the best one depending on what you want and how depth you want to learn.
Sir can you suggest good training centers in Pune for VLSI
CDAC Pune , no other trusted vlsi centre to my knowledge.
But Pune can't provide a environment like Bangalore or Hyderabad .
Make a video on embedded training
I am from VLSI background. I can make videos on B.Tech ECE courses(including Sensors working, component's v and I , P rating principle etc. , these are all related to embedded) but not exactly Embedded system. Thanks.
can u tell me some training centre with good placemnt in bangalore
www.quora.com/What-is-the-best-VLSI-training-institute-in-Bangalore
Do VLSI companies put class 10th and 12th 60% eligibility criteria ??
Depends. But many don't bother. If you join any VLSI training centre then they set criteria during placement like 65 or 70%( many freshers get placement from VLSI training centre, so it might be a problem as very few or NO off campus drive for freshers)
Synopsis set 70% criteria throughout career.
So it depends on companies . If they visit college then they will give you criteria(but here there will be more flexibility, many times they simply ask b.tech %). But it's not like software job.
So it's yes and No.
if you have 1 year experience in VLSI domain, no one aaks your percentage
The good thing is most of them don't evaluate you based on your percentage.
@@ComponentByte what about campus placement in NITs or IITs ?
Do they set the same criteria ?
Some companies set criteria based on 10,12
Some based on B.Tech and M.tech
Some , only M.tech till 1st year.
So it's Yes and it's No. But above condition works everywhere. It depends on company policies. So some may allow and some companies may not .
@@ComponentByte okay
Thanks a lot for the info
Thankyou sir . Is sumedha IT in hyd good institute to join ?
If it's for VLSI or embedded then you can visit once
nano CDAC in Ameerpet (it's not CDAC)
Can u tell me is this institute good
8k-10k per month package is too low bro
Yes,but many b tech graduates are getting this amount .This is the harsh reality. Many b.tech graduates are being exploited and are forced as we have more graduates than job opportunities.
How is VLSIGURU training institute ?
As per information available in internet its training is low cost among many and some VLSI guys from companies run this training. Rest is you have to explore on internet.
Plz add captions sir
I am trying for it. It will take some time. Thank you.
Brother I'm extremely interested in Analog Design , Also I have learnt Analog IC Design by prof Nagendra from IITM. Can u suggest me best analog design (also custom layout) at HYD(I'm from Telangana) or Bangalore or any other keeping placements in consideration🙏
Few years back silicon system was famous for physical layout design in Hyderabad. If you join any branded training centre like vedaiit,rvvlsi then you will get the benefit because placement happens in the name of brand but yes your hardwork matters.
@@ComponentByte Veda IIT recently opened notification for SoCtronics engineer trainee but they are not allowing 2019 passed outs to apply only 2020&2021. Also they launched Diploma in VLSI engineering which is a paid course -to see it's response, they included all (2018-21) batches. Can I expect they will allow 2019 guys for next recruitment? Or can I see for RV VLSI?
Veda is always strict about the rules. They are more professional than others. So it's your decision how to proceed. Thanks.
@@ComponentByte Tq brother 😀
I am also interested in Analog design. Did you join in any course ? if so , can you please suggest me which is the best for Analog design course ?
Which is best institute in banglore??
CDAC,MAVEN,RV VLSI,CHIPEDGE,SEMICON, VLSI guru , CVC Pvt . They have their pros and cons. So now find out which one is best for you as per your requirement.Thanks.
Sir
Please suggest best vlsi training centre
CDAC is always best.(govt)
NIELIT Calicut (govt organization with best lab facility)
Maven(it's a brand name)
Veda IIT
RV vlsi
These are few brand name but there are many small and could be better in terms of vlsi teaching. But brand matters for placement.(even small training centre also helps to get placement)
FOR VLSI , which CDAC is best in terms of placement ? NOIDA / PUNE / HYDERABAD . please advice . thanks in advance .
I will prefer Hyderabad
Sir which is better online or offline course
If it's VLSI then definitely offline. One mustn't join online VLSI course, it's complete waste of money. I have heard many training centre are offering online courses then definitely they are just doing business and nothing else.
If it's software then it doesn't matter much.
Thanks
Sir MAVEN is providing online training for front end. Should I trust them as in front-end I think online can work.
I am btech(ECE) 2019 PASSOUT
Any guidance is very much appreciated
I would never prefer online VLSI training.
Physical interaction is a great way of learning. It's not all about learning but to make connection with teachers and new people who might help you on your journey to get into vlsi industry. If you go for an online training then your vlsi friendship Circle will be a small one.
I don't say that you won't learn online, you will do. But network you can't make as no physical classes which is more essential .
So choose wisely.
@@abhinavsagar8238 Hi Sagar, Have you joined training im Maven silicon, can you please tell, if yes please tell me know, i need some guidance
I have an institute they will provide me training with job with bond of 3 years original documents......can I trust??
If someone is desperate then they will definitely join but if you think you deserve better then try for better.
@@ComponentByte I didn't get your point
@@ComponentByte I didn't get your point...... should I join or no???
How authentic they are you can't find.
Do one thing, if possible visit the place and meet the people working there( after submitting their documents). Ask all your doubts and then decide whether to join or not.
or
Ask for help in quora platform, you might get the solution.
Or
If you have no option left and if you are ready to join vlsi industry and want to take risk then you can submit your certificate and join.
If you are ready to pay bond amount if you get better opportunities then you can join.
@@ComponentByte thanks for your guidance.. please let me know can I get 15days leave for my marriage?
Any one suggest best Institute in hyderabad please
Best is always CDAC Hyderabad. Then Veda IIT. Rest is yours choice.
Msc after do u have training?
Sorry, didn't get your query. Please explain a little more.
Is maven good??
I have heard it provides placement opportunities and it has its own reputation. Those who gets job offer praises it and those who doesn't get, generally will never recommend.This is human behaviour. This is the only information I can give now.
Diploma wale bhi ker sakte hai kya sir
To my knowledge, NO.
Btech or BE is must
Sir diploma in electronics VLSI karsakte hai ????
Yes, it's a better option than master degree if you have completed your B.Tech and if you are financially stable and want to get a VLSI job.Thanks.
How good is maven silicon.
Maven is very good at design and verification.They have very good track record. They run a company named ACEIC. They even provide placement or internship offer to few in their company. It's a verification company.
How good the world depends on how good you are to the world.
They will provide you a platform to grow and only your dedication and hardwork (during training session )can lead you to your destination.You can learn enough to survive all the odds in VLSI industry. So it's you.
@@ComponentByte Thank you . Can you make a video on analog design enginear.
@@ComponentByte sir fees ke bare me kuch pata hai??
Just for a good job
I don't get your query.
Can BE GUYS GO FOR training
Yes, definitely.
Hello sir i have some confusion please talk to me
Yes, please. How can I be service to you.
@@ComponentByte i want you learn vlsi itself through online and currently I am working and i can't affort fees please tell me path
VLSI is a technology to design IC. it's very broad so please be specific about what you want to learn. Is it verilog coding, FPGA , analog, layout design, physical design, verification etc. Hope you got my point. I can give some suggestions only when I will get know about your needs. Thanks.
Any vlsi best institute in Bengaluru
Maven, RV VLSI, CDAC
bhaiii...I am searching for jobs in vlsi (fresher trained)...could you give me any reference to get into a company...pls have a rly!
Hello, no references from my side , sorry. I help freshers who wants to know about semiconductor industry , how it works and how they can make their career in VLSI industry. Before any opportunity comes prepare yourself well. Thanks.
Sir, Is DKOP labs good for training and placement? I am ece graduate (NITK) 2020? Should i consider job their job oriented training in vlsi program. Please tell .
DKOP lab has mentioned that their trainers are from IIT(but it doesn't matter if not placed). You need to check their placement history(they have shown VLSI companies name on their website). If giving 100% placement then join else it's better not to. If you want to join then visit the centre and have a talk with already undergoing candidate so that you will get to know about the reality of DKOP as you might have to pay a big amount if you join .
Why don't you try for CDAC or NIELIT CALICUT.
Choose wisely . Thanks.