I've been waiting to tackle this next upgrade but did see how everything came together. Super grateful for posting your pictures along with measurements. Gives me a good starting point as my rig is a bit longer. Looking forward to the next view. 🏁🏁
Subscribed & have been watching your RS Mega+ vids as I'm about to start my own build. For the two red aluminum profiles in the middle on the bottom traction loss build, what is the length for those? Sorry I couldn't find that in any of your videos. Thanks!
Thanks for this man, there's not a ton of info out there for this, or it's bundled with surge and I don't want to add surge so I'm kind of just guessing what parts I do or don't need.
You do not have to. The Thanos controller has a park option that sets the servo to 50%. Just make sure when you install it, you have room for the rig to go left and right. You can install either left or right it won’t matter.
it's about 66 long (including the frame for the tension belt) and 23 inches wide. but if you add more peripherals on the side (shifter, flight controls...) it will increase the width.
I'm thinking I want to build a rig just like you, but it seems hard to build for both race and flight sim. Do you use rudder pedals? Is RS Mega good for flight sim?
It’s Behr PPU2-17 Morocco Red Interior Chalk Decorative Spray Paint Aerosol and Behr Black Matte Interior/Exterior Spray Paint and Primer in One Aerosol - both from homedepot.
I've been waiting to tackle this next upgrade but did see how everything came together. Super grateful for posting your pictures along with measurements. Gives me a good starting point as my rig is a bit longer. Looking forward to the next view. 🏁🏁
Do you have a part list of the things i would need to buy for this set. Aluminium profiles and connectors. That would be helpfull.
Great videos! I am considering doing just the traction loss. Do you have a parts list other than the one that comes with eracing labs stuff?
Yes! Man been getting this request a lot and in the process of finalizing a written guide with parts list.
Subscribed & have been watching your RS Mega+ vids as I'm about to start my own build. For the two red aluminum profiles in the middle on the bottom traction loss build, what is the length for those? Sorry I couldn't find that in any of your videos. Thanks!
These are 21.5 inches
Perfect. Thank you!!!
Thanks for this man, there's not a ton of info out there for this, or it's bundled with surge and I don't want to add surge so I'm kind of just guessing what parts I do or don't need.
You can do traction loss with no surge for sure.
Hi, When setting up the T/L actuator, did you have to pre-center the servo? Can you mount the servo on the left or the right side? Thanks in advance.
You do not have to. The Thanos controller has a park option that sets the servo to 50%. Just make sure when you install it, you have room for the rig to go left and right. You can install either left or right it won’t matter.
how long and wide is your rig that comes on top of this ?
it's about 66 long (including the frame for the tension belt) and 23 inches wide. but if you add more peripherals on the side (shifter, flight controls...) it will increase the width.
Does this came with elab kit? I mean the black plates
Yes black plates do come in box. I have a video showing what comes in the package.
How did you connect the TL swivel?
I'm thinking I want to build a rig just like you, but it seems hard to build for both race and flight sim. Do you use rudder pedals? Is RS Mega good for flight sim?
I like your well thought set-up. Most people assemble tr160 incorrectly for actuators.
Thanks. Yea I do use rudder. I added a metal plate for the rudders and i can easily remove the rudder then put it back when I want to fly.
@@simul8master Do you put the rudder plate in front of the race plate and no need to exchange? If so, it is perfect.
I was worried about whether i could make the space.
I’ll send you a picture. If you plan it right, you can make the space.
What kind of spray paint you are using on the profiles? They look good!!
It’s Behr PPU2-17 Morocco Red Interior Chalk Decorative Spray Paint Aerosol and Behr Black Matte Interior/Exterior Spray Paint and Primer in One Aerosol - both from homedepot.
Can't wait to get started on my build. Where did you get the plates that goes on the profiles?
Hey ! You’re gonna have s lot of fun. Those plates come with your purchase from eracinglab.