Making Glass Tubes with a Bubble on the End
Вставка
- Опубліковано 2 жов 2024
- The making of a small glass tube begins with the pulling of molten glass to form a tube. The tube is then reheated with a torch, the end is closed, and air is blown to create a small bubble. Learn more in The Techniques of Renaissance Venetian Glassworking by William Gudenrath renvenetian.cmo...
The Venetian glass industry enjoyed a golden age during the Renaissance. By the early 1500s, the wonders of Venetian glass were well known throughout western Europe. Not well known, however, was how these objects were made. Until now. The result of 30+ years of research by William Gudenrath, The Techniques of Renaissance Venetian Glassworking - renvenetian.cmo... - presents 35 complete reconstructions of Venetian glassmaking techniques through detailed 360˚ photography and high-definition video.
I saw a guy in an alley making one of those with a lighter, cool!
Lmao
😂😂
yeah I've seen it done but they usually use a butane torch.. lol. . no bic is gonna do that especially in a alley which can feel like a breeze way on a pretty windless day.. it's enuff of a issue to light a cig if there is a slight persistent wind .. let alone trying to roll the glass while holding a lighter. lol.. my roommate had a thing about making them all the time. of course we all know what they are used for.. but he would also blow pipes for smoking bud too ! which is alot harder because tye stem has to be narrow enuff so you don't suck the weed down your throat when u hit it unless u use a screen but you didn't need one with his. he would also use different color glass hot enuff to layer the different colors into layers so it looks like a marble. the guy had some real talent. it's sad because he was a really good guy .. he just had a problem.. but he didn't let it define him or change him so he was a functioning addict or user.. finally got clean after years of use because he found out that his girlfriend was pregnant and they had tried to get pregnant for almost 7 years or something .. and when he did he started working at a smoke shop and the owner found out he could make some of the dopest pipes or glass pieces as they call it .. lol... and allowed him to sell them in his shop and didn't want a cut at all and he saved for about 4 years or so and was on his way to a bank to have 2nd interview for a loan and his boss had gave him permission to put him down as a reference at the bank because the boss banked there as well and said if it came down to it he would consign to help him get the loan if he wasn't able to do so on his own. on the way to the bank at 8am or so he was hit by a drunk driver and was killed .. R. I. P. STEPHAN CHARMICHEAL!!!
@@Justinarmstrong0089 dude
Yeah I walked in my buddies apartment in Atlanta one day and I see this flame coming from the bathroom dudes got a Walmart propane or butane camping tank with flame shooting out rolling and blowing to his hearts content he looked like he was having the time of his life so who am I to hate
Soooooo. You just taught us how to make bubbles for dope..?? Is this a joe biden paid service announcement??
My cousin in Missouri makes those all the time. He calls them 'incense burners' but I don't think they work very well. His trailer never smells that nice...
uhh bro they are not incense burners...
hush now. that's exactly what they are. we call em bubbles round here
Your cousin must get those breaking bad incense
Oil burners.... Yep what we smoke and what keeps your electricity running
@@beefchief3084 why hush
the corner store has ready made tubes just blow the rose out the end lmao
Pippy puns
Rise in a bowl
Lol
😂
For extra flavor leave the rose in!
For your health!
I need this video for “scientific research” 😂
As Mike Tyson would say, “That’s methed up.”
My favorite thing to say
Lmfao.....
Quit Methin around
@@DavyKrankit C'ON ,STOP SQWOOING AROUND!!
OMG! Your comment had me laughing so hard it hurt. It also cheered me up and made my day!
These must be super easy to make because I see them everywhere on the ground near the local outreach center.
Just here for the comments 😂😂
Great how to make dope pipes 101
It’s missing the little rose
lmao
now show how to make a tiny hole on the top. its for uh ,... anniversary present . Gonna get her that rock she always had her eye on .
Kris Bailey Very thoughtful of you. I'm sure she'll be bouncing off the walls and shaking with excitement... probably won't know what to do with herself!
down in a Hole lol
Just heat up the area with a torch and blow air through the other end
maybe put a little flower in it... I saw that once in a... a... gas station.
HAHAHA damn, I'm a year late and a comment short
a micro scale reaction vessel for my chemistry experiments...i love it
The mind sees what it wants because this looks like the starting point for many artful and scientific end points as well as for modules therein.
That's a nice way to put it
Quick scrolling past the thumbnail, and I thought it was Hunter Biden at first
😂
That doesn't take talent, it takes an addiction
He’s addicted ? To art? I’m not following. Hes well know at corning.
@@Coincidence_Theorist really??
@@bty1471 Don't bother explaining LOL
If corning is hiring ppl to do this sign me up. Long time pro
It's not an addiction dummies it's what powers you're Fucking electricity
There sure is alot of glass blowers in my city...
Whoa, Mr Rogers took a dark turn down spinning puddles lane
Whats in part 2? Cooking the cartel way.
It’s called batching
Deja' Vudo. I believe that is the 3rd or 4th! Part 2 focuses on using your newly found skills, like quitting your day job, "or some do the opposite and pick up 2 extra shifts" Part two includes how to ask people to borrow moneyz, how to find hookers using key words. And touches base on a few misconceptions and stereotypes about folks who Engineer glass tubes with a bubble and a pin hole for decorative purposes. Such as but not limited to: don't let the old lady find out what im doing. Not because ill get in trouble, but because my budget will quadruple and i cant afford that duh. Also the if she "smokes" she "sucks", and the age old saying "you can tell alot about a man by the size of his jerry" very important information to be obtained by an entrepreneur looking for a change of lifestyle and searching for those key bullet points that'll surely guide them towards that successful dream that all others in the specific trade had spoken about. I suggest all the videos be watched and studied rigorously so that you get that "Life" you worked so hard for.
Two days later the guy sounds like Beetlejuice
It's a " oil burner "
Yes thus why they are talking about oil companies
Wow well I’ll just leave the hole someone will think of something to use it for
Ronnie from the hood knows how to do this. Unfortunately Ronnie pawned all of his glass blowing equipment once he realized his bag was empty.
DAAMMMIITTTT
I took some blotter bout an hour ago and this is going to entertain me for the rest of the evening
🤣
Part 2 how to roll the bowl without spilling it
i hate when I do a 360 bowl scope
that’s the easy part
😂 😂 😂
Always remember Ten o clock two o clock
without burning it
I'm pretty sure I've seen this on BREAKING BAD
Well, all I gotta say is... put that in your pipe and smoke it!!! Famous words from Festus on GUNSMOKE!
Bahahaaaaa!!!! A tube with a bubble at the end huh? Boy the world definitely needs more of those ..........
I'm from sanfrancisco, and it's nice to see someone blowing glass and not blowing his,,
Lol
Um I bet those are a big seller
It's a hell of a drug
Skante ninja is prolly watching this.
Can you show us how to make large glass tubes, so that we can make custom nixie tubes.
He just showed us how to make a pookie...
A pookie?!
Chicken bone, oil burner, bubble, glass pipe never heard pookie tho
Glorified gosh damn spaceship 🚀 let’s not do this
I'm off to the chemistry channel now thanks for the help
Buddies fingers are burn proof??!
I remember at the county fair, always had a booth where dude made all kinds of art. Some were magnificent, but very very pricey!
Wtf..wow.. wow You Tube You just love giving tutorials about everything...
Damnit, I just dropped my pipe in the sh s by my fire 🔥. I swore, "Tonight I'm going to sleep. Guess not. Lol
Good thing my picture is right by my full name so there's no confusion. Obviously Paranoia is not one of my issues. Loosing 1 of 4 teeners seems to be though .
Get some rest sir
Raise hell for the Chevrolet smell
How tf is he heating up the glass with out it burning his fingers does glass not distribute heat or am I missing something?
It does not distribute heat very far from the flame, I blow glass and you can hold your tube/punti like a few inches from the flame, you’ll feel the heat for sure but won’t get a burn
Glass is a good insulator
...
What is the difference between "glass blowing" and "lamp working"? I saw them both on Wikipedia, but I don't really understand how they're different.
Hi Richie, we checked in with our properties of glass programs supervisor Eric Goldschmidt and he says: "The biggest difference between “glassblowing” and “lampworking” is the heat source. Lampworking could be defined as a process in which a focused flame is used to soften glass for shaping. Glassblowing typically refers to a process in which molten glass is prepared in a furnace for manipulation. Glassblowing is often used as a general term, and lampworking is often seen as a smaller subset of this craft.
Lampworkers typically start their process from pre-formed rods and tubes of glass. Glassblowers typically start their process from a furnace filled with molten glass.
In either process, forms may be made hollow or solid.
" Thanks for watching!
@@corningmuseumofglass thank you! It seems like a lot of people on UA-cam who actually do lampworking say they're doing glass blowing, like when they make scientific lab glass and pipes.
I must be the only idiot that didn't realize till the end he was making a pipe.. I thought wait a min. Let me read the comment section..😆
Most just but up their light bulbs and sit awake all night in the dark......
Just keeping it real, aintche LMAO,, good one
;)
Today on PBS up next is Mr. Rodgers then at 8 is Julia Childs Kitchen and at 9 How its made: Crackpipes then at 10 Poirot!
I've been seeing this girl named Tina for a while now and she wanted one these to keep ice in
hahahah man you better live tina alone before she ruins your life
@@bianccaparazo8662 but maybe Tina is a good cook?? ;)
run from Tina.
Bro she finna catch you
Hi I just wanted to tell you that this is really cool you should make more vids😍
Thanks for watching! Be sure to subscribe, we post new glass demonstration videos weekly.
Hell yea cause my last one broke when the cops made me empty my pockets lol
How dare the police steal your glass tube with a bubble on the end. They were just jealous prolly.
how in the f%$k are his fingers not smoking?
Nice bong
This is pretty Methed up.
I think it's considered glass blowing when you blow
Whatcha doin that for?
Huh?
Huh?
Wow
Shame about that hole in the bubble on account it hadn't yet fully closed - great to be aware of that possibility.
😂
Do you own a doghouse?
What is that?
@kayla nace it's a bubble with a glass tube on it actually
What kind of blow torch is that?
Probly oxy/propane mix
definitely not going to work with borosilicate unless that is an oxy fuel bunsen burner you'll never get the glass hot enough to easily blow a bubble on the end out of the flame unless the wall thickness of your tubing is very thin, in which case the resulting spherical shape on the end will be even thinner and practically useless as the thin profile will easily break when subjected to any stress, heating variance, or impact
Not true. I use a bernzomatic ts8000 and i can blow some pretty thick glass. Even the colored tubes that are much harder. Just gotta have some patience, and maybe a blow tube.
You know what they say about nay sayers and do gooders...
That's bullshit. I blow pyrex with a map torch. Hell, I've done it with butane it just takes awhile
You can also use Mapp gas with Boro, not just oxy/propane.
What kind of Bunsen burner is that
Dems oarl burners moke met ot ifid WHY THAT'S LUDICROUS
English bub , take a nap and try again
I understood perfectly. Now gon bak inuh house Pete, yuh ain gettin nunuh dis here mep.
Sweet speed pipe🤘🏽
Saw your comment, said to my girl "bet this fools a dirty kid", look at name ,checks out- Keep it xFREIGHTxEDGEx oi
Finally! I’ve been looking for a video on how to make a rainfall gauge so I can keep track of how much rain falls!!
I just need to make sure I close it up all the way so I don’t end up with one of those pesky holes in the side.
Like this comment if you’re psyched to make your first rainfall measuring device!
Indeed...
Gotta make sure your tube ID is right or it won't be accurate
And to keep it from breaking when freezing temps come along, put an inch of antifreeze in it
In other uses of this device the hole makes it functional 😂
Am I the only one watching this cause I need to know how make some glass test tubes and beakers for science? They are so expensive and I'd like to make it from recycled glass I already have!
yes. you are.
Thats actually good money if u have a lab locally that requires custom glassware, i would suggest only soliciting labs associated and located with academic facilities because the other labs seeking your services might not be the kind of clientele your gonna wanna foster a business partnership with lol
Laboratory glassware is made from a special kind of glass that is more resistant to thermal changes. Use some recycled glass and it might explode on you.
@@SlimTony how do you know that Tony and why are you slim
@@andrewdias3097 because Tony is smart and because tony is not wide.
Ahh ,quit methin around … lol
This is why I bought a Delta Elite.
shoutout to local hood science team they use bunch of that
What torch model is that
Just ha ha ha ha
Impressionnant la façon que vous travaillez !
Je ne savais pas que c'est de cette façon que ça se fabrique ☺️
Pardon je ne parle pas anglais
Ca cest pour le fume de amphatamina
@@LIcPel okay merci :)
don't worry google gives u the option to translate so it can be translated into any language that your UA-cams language settings are on.
@@LIcPel afghan #3
You were that quy in the ally
Mr Rodgers out of work?
TWEEKER! !!!!!!!!!!!!!!!!!!!!!!!!
Its a chicken bone round these parts
Bubble 😂 end
Lmao!!!!!
I can lie he's fkn.good!
Fucking wow
The guy doing the voiceover sounds like Sheldon from Big Bang Theory
Pilo
“How to make your very own moon whistle”
I need to make a ²in wide x ⁵in high tube for my nans lighthouse lamp. How would I achieve that 😬
انتم تصنعون ونحن ندخن كرستال بي🙂😄😂😂😂
😂😂
@@faqo50 دوم😄😁😁🙆♂️
🌚
I wonder if this works with copper and stainless. And I already know one way to find out.
What on earth are you talking about?
Please please do it and make a vid that would be awesome!
U better have some serious heat!
bro sounds like Sheldon cooper 💀
I beleive they're working with joe. subliminally, telling us to get ready for a wild ride folks.
Nothing would surprise me at this point..
Noooo You didnt tell us how to remedy the pin hole. I hate when that happens and its so hard to close up after the bulbs blown. Ive tried a few methods but the results never look good. I find the easiest way is to either start again or heat up another piece of glass to melting point at the same time and touch the two together at the side of the pinhole until it sticks and cover the hole like that.....but Im a hack so illd like to know a better method if there is one. Ive even tried dabbing the red hot bulb at the pinhole into crushed glass and reheating.
I wonder how long this guy has been up.
Im not meth'n around.
You have a good cents of humor
The heat dont travel to his finger
2:09 no because he is exhaling out into the tubing 《 which is kinda like cooling your food down with slow steady breaths, or when you were a kid and you would get a drink and a straw and blow into the straw into the drink and it would cause a bunch of bubbles in your cup and you'd get a kick outta it. 》ahh those were the good old days..
$#!+, did i just date myself, like the "back in my day..." type dad responses?
$€R¡●U$[¥, does anyone else relate to this, or was i just that weird?
Sounds like John Malcovich narrating the video
Looks like something bad
Making dope pipes?
The bubble is perfect, but the hole is off. Can you make it near the neck.
😀😀😀
when i tried to fuse two different pieces together i could not keep my hands steady and they would pull apart my luck great video
Glass bottles?
Eso
which glass tube we can use?
get a sprig air freshener from the gas station or go to the smoke shop for a glass rose lol
The stronger the better
What type of gas is used? Small scale for finishing, reheating tubing?
How to make a methpipe
🕯🔮😲💨😵😬