79 Bike Falcon M "First Ride and
Вставка
- Опубліковано 10 кві 2024
- Come with us as we go through our initial impressions and ride of the 79 Bike Falcon M!
How does this bike compare to others on the market in your opinion?
Thanks you for watching our video! It would go a long way if you like commented and subscribed!
Key Features:
-8Kw Continous
-Sotion Motor
-72v 35ah Battery
-Direct Mount Stem
-Riser Bars
Product Parameters
Product Size&Weight:
Full Size: 73x31x41 inches (1860mmX780mmX1050mm)
Wheelbase: 49.2 inches (1250mm)
Seat Height: 32.6 inches (830mm)
Product Weight: 130lbs (59kg)
Max Rider Weight: 220 lbs (100kg)
Motor System:
Battery: 72v 35Ah LG INR21700 M50LT
Rated Power: 4000 Watts
Peak Power: 8000 Watts
Battery: 72v 35Ah LG INR21700 M50LT
Charging Time: 3.5hrs (10A Charger)
Power Modes: Standard:40km/h Sport:80km/h
Controller: 79Bike Custom sine wave controller with high-performance FOC algorithm
Speed&Range:
Range:120km(20km/h)
Max Speed: 49.7mph (80KM/H)
Frame: Aluminum Alloy
Brakes: Front & Rear Hydraulic Disc
Shocks: MNT Single Cavity Double Adjustable
F&R Tire:19/19
Hub: Aluminum Alloy
Drive Chain: Manganese Hadifield Steel
Handlebar/ Lever: Aluminum Alloy
Steering: Aluminum Alloy
Lights: Dual LED
Water Proof:IP67 - Спорт
Lets get a controller upgrade video! Curious to see how the Sotion motor can handle more power.
their is also a upgraded motor 10kw on their website
Rear end was making noise because the chain hits the chain guard. Take it off and it’s silent
Really cool bike, glad for the competition helping us all.
big difference between first ride and first ride 2.0. the bike sounded way better. and yes that was a gnarly climb lol
Why would they send you a pre production bike when it’s been out for awhile
Glad I chose my E Ride Pro SS instead of
The extra couple hundred $$ goes a long way on the Eride!
Like the video! Don't wanna come across as a hater. Audio could use an upgrade. hear a buzzing.
Keep up the good work!
Appreciate the feedback. Mics can be very tricky in the wind
The real review starts at 14:30 with "ride 2.0". The chain slapping during the first ride was doing that bike no justice. You were ripping on the Falcon M!
i received mine without keys, do you know if the surron keyless accesory fits?
Before you beat the falcon M up any more. Take it apart and grease everything. The factory doesn't grease anything. And loosen the chain. It's way two tight out of the crate. Careful with the jam nuts.
We did go through and do this before the ride 2.0. Thank you for the feedback!
fastace forks on my Talaria Seam to be doing the same Feels like im bottoming out but not getting full travel Maybe 4"
If the fast ace isn't giving you full travel that is definitely concerning.. Would they happen to be bent?
Great and even cheaper clone of the anemic little light bee🤔. How about some powerful 7/8 sized bikes
How are you guys getting a preproduction bike six months into production these bikes have been out since the summertime Almost everybody that has written the bike says similar things. I feel like this bike could be so much better but they missed the mark in a few areas it will be interesting to see what the next version is. Hopefully It’s pretty good.
They did send us one of the early ones from their storage. However yes, we agree, and have been giving similar feedback. They are very keen to keep improving their bike and I think we will see quality from the factory improve greatly
@@ChargedCycleWorks good start but not the best on the market
Can you throw a new controller on it and give it a proper 12-18k tune is the question?
The EBMX X-9000 controller is compatible with this bike. With the Sotion motor, the only limiting factor would be the stock battery, which I can't see why you couldn't run at least 12k continuous.
10x nicer than a mantis.
The design of that shock (DNM) uses an open piston design with only a rebound shim stack. The compression adjuster (bleeder circuit) is the only thing controlling compression damping. That’s why you can fully close it off. It’s a terrible design 😂
So many of these fly by night companies coming out. I'd stick with one of the more established brands, but that's me.
Not the best company to buy from.
I decided to buy a Falcon M instead of a Surron or Talaria, but found out it has terrible Quality control, I RECEIVED MINE WITHOUT KEYS! I ordered a Matte black one, and received it scratched and poorly retouched with black glossy paint!
2 months have passed and I still don't know if the bike works or not, terrible experience.
"What looks like DNM forks; decent forks"... What. DNM forks are crap. That says enough about the brand for me.
They looked to be improved DNM forks in comparison to original ones at first glance. However upon riding them they are very similar to the old. So yes, they aren’t the best.
We have had good success in tuning the DNM fork and when that is done they are significantly better.
Ugh another Sur Ron Light Bee clone
We would like to see more innovation as well
💩 colored frame looks terrible