If you disconnect the actuator wires and start the car will it throw a CEL or is it fine? I suspect my actuator is on its way - making weird noises ( video v=zFvLvhVcqBQ ), and I wanted to check if it is really the culprit... Thanks!
On mine all I had to do was turn key to on without starting and let it sit there for a minute and it does the reset by itself. Mine would stop working when it's cold I would have to do the reset like twice a week I replaced it with a used one and it went away. I used a new aftermarket one off eBay first but it didn't work.
You didnt really make sense at the end.. Do you push it closed with your finger and hold it there? When i start my car the valve is mostly open and when i rev it, it opens the rest of the way completly instead of closing
Smaller supercharger pulley Larger crankshaft pulley Remove the mesh on the mass airflow sensor branches or a cut off for less back pressure Double up or get a bigger intercooler Redirect bypass valve to atmosphere if u want it to dump
yas yas but i have a question why does it happen ? why the system is confused time after time ? i did a lot of resets but it lasted 1-2 days and i had power loss again. i bought a new one, installed it, it lasted for 2 months and today i lost a power again. yas i reseted the valve and hope it will last enother 2 months again. BUT WHY THE FUCK DOES IT HAPPEN ?
Why did you take it off the car? That's crazy the way you were disconnecting everything. I don't think any of that is necessary. You only need to remove the air filter, and it's NOT a throttle body. The problem with youtube is people ASSUME you have some idea what you are talking about. I'm thinking, not.
how do I know if my supercharger is working properly ? I just bought this car ! and is there any maintence to this supercharger ? like oil change or anything ? thanks
Would this fix slow throttle response?
Thanks for posting!
i didnt understant about that relearning?
how its done?
you said you hold it but just ignition on and no holding it
If you disconnect the actuator wires and start the car will it throw a CEL or is it fine? I suspect my actuator is on its way - making weird noises ( video v=zFvLvhVcqBQ ), and I wanted to check if it is really the culprit... Thanks!
Do you know my friend where is the socket on the turbocharger to change its oil on the mercedes SLK R170 2002 ??? Thank you
LoL so what happened after the manual reset. Is the actuator bad?
i tried that relurning but the flap doesnt close
On mine all I had to do was turn key to on without starting and let it sit there for a minute and it does the reset by itself. Mine would stop working when it's cold I would have to do the reset like twice a week I replaced it with a used one and it went away. I used a new aftermarket one off eBay first but it didn't work.
You didnt really make sense at the end.. Do you push it closed with your finger and hold it there? When i start my car the valve is mostly open and when i rev it, it opens the rest of the way completly instead of closing
yep, didnt make sense. do you hold it past the limp mode while turning on the ignition of do you push it till it closes THEN turn on the ignition.
Tourque is force × perpendicular dustance so u were getting 40 ftlbs at ~ 2ft that is 20 ftlbs at 1ft so u actually were tightning at 60ftlbs.
yeah it will throw the wastegate solenoid code if you disconnect it.
The problem is MAF
Any suggestions for making it faster then the stock
Smaller supercharger pulley
Larger crankshaft pulley
Remove the mesh on the mass airflow sensor
branches or a cut off for less back pressure
Double up or get a bigger intercooler
Redirect bypass valve to atmosphere if u want it to dump
My throttle body sensor is sending a code, the sensor and throttle body is one unit which silly, it’s around $800 for a new one
A NA should do a video on supercharger silencer removal.....
I no longer own this car... I miss it alot :(
Переводчика на хрен сюда,быстро!
Включи субтитры выбери автоматический перевод. И в списке выбери русский 😉
change out your pulley to a smaller diameter
You can click on top of each comment to directly reply to someone. Kind of confusing the eay you're replying.
yas yas but i have a question why does it happen ? why the system is confused time after time ? i did a lot of resets but it lasted 1-2 days and i had power loss again. i bought a new one, installed it, it lasted for 2 months and today i lost a power again. yas i reseted the valve and hope it will last enother 2 months again. BUT WHY THE FUCK DOES IT HAPPEN ?
Can i know how to reset it?
كام سسي
Why did you take it off the car?
That's crazy the way you were disconnecting everything.
I don't think any of that is necessary. You only need to remove the air filter, and it's NOT a throttle body. The problem with youtube is people ASSUME you have some idea what you are talking about. I'm thinking, not.
To do the reset all you do is remove the air filter and push the flap with it on the car!
how do I know if my supercharger is working properly ? I just bought this car ! and is there any maintence to this supercharger ? like oil change or anything ? thanks
Cevri
@@totljag1 run a scanner