Ubiquiti NSM5 Setup
Вставка
- Опубліковано 6 вер 2024
- I'm setting up ubiquiti nanostation m5 for point to point Wifi or point to multi point Wifi.
This allows me to cover about 1 mile distance of sending the signal.
It's for outdoor and indoor use.
If you are using other nanostation model, the setup and process more or less the same.
Where can I buy the product ?
NSM2
- amzn.to/323eypZ
- amzn.to/3ikvNdx
locoM5
- amzn.to/3KV3uPa
NSM5
- amzn.to/3h3o80m
locoM2
- amzn.to/2GwzxsN
POE switch
- amzn.to/3tqa36D
- amzn.to/3ii0iB3
Reolink 4k camera + audio
- amzn.to/3ijvdwG
- amzn.to/3L4eH05
Mounting Kit
- amzn.to/3buYOPw
- amzn.to/3ijnhf5
- amzn.to/3i2DVhe
-----------------------------------------------------------------------------------------------
If this video is helpful or helped you, it will be nice to have a cup of coffee.
Appreciation support to UberGeeks via PayPal:
bit.ly/3badyS4
Subscribe to our channel for all our latest videos!
/ ubergeeksbiz
Follow us on Facebook:
/ ubergeekshawaii
Follow us on Instagram:
/ uber_geeks
As an Amazon Associate I earn from qualifying purchases.
As an eBay Partner Network I earn from qualifying purchases.
Legal Disclosure:
UberGeeks video(s) or information provided on this website does not, and is not intended to, constitute legal advice, constitute IT professional advise, information technology expert, or tech related material; instead, all information and content available on this are for entertainment purposes only. No information contained in this video shall create any express or implied warranty or guarantee of any particular result.
UberGeeks shall not be held liable for any damages, losses, injuries, loss of data, or harm arising from the use of information or techniques presented in our video(s) or information provided on this website. By accessing and using our content, you agree to release us from any liability.
Participation in any activities or experiments presented in our video(s) is entirely voluntary. If you choose to replicate any actions or experiments, exercise caution, and prioritize your safety and the safety of your equipment.
Thank you for joining us on this IT journey. We hope you find our video(s) enjoyable. Remember, your participation in this channel is at your own discretion, and we encourage you to use the information responsibly and safely.
#ubiquiti #netgear #reolink
The good thing about the M series is they are compatible with other brand bridges and even off the shelf wifi routers meaning you can use a nanostation M series in station mode to pick a wifi signal from your off the shelf wifi router or modem/router device your ISP leases you, or your campus' or apartment complex's wifi as long as you match the channel width.
best teacher
Best ubiquiti setting explanation. It is very complete. Thank you Sir
Glad it helped!
@@UbergeeksBiz the settings of the ip addresses of both main and slave stations are not working as you posted. Everyone needs to put in the gateway of their particular internet source then assign to each nanastation an ip corresponding with that of the gateway. Then then internet will work properly.
The best way to midigate obstructions like trees in the signal path is not opt in for the NSM9's which are 900 MHz radios. Not the best band but is better than 2.4 or 5.8 since the lower frequencies do not deflect and get blocked as easy.
Excellent explanation and guide. Greetings from Costa Rica
You are welcome. Would like to visit Costa Rica someday
Hello, I have successfully completed all steps and have full signal on both sides, but when I plug in my wifi router on the B side, it says I have no internet when connected to it? I can hard wire it and it works fine but not through wifi? Any help would be so grateful
Great Video! What do the "Router" modes do in Network Modes? Station B is set to "Bridge", but Simon said he would look into the "Router" modes.
Is this like a Modem or like a Mesh Router? What exactly does it do and how does it work? Some relatives asked me about this from back home! I am trying to understand how it works before I order one for them. Everytime i talk to them or video call, their connection is bad, they suggested me to get them this one. I want to know does it help or there's something else that is more effective. Plz help
Another good video sir ! Keep them coming !
You are welcome. Glad the video helped.
hello Please Quick question: Can they work independent of each other? say i just wanna use one as a wifi booster and i want a relative 1km away to just capture my home wifi. will that work?
Followed your instructions to install M2 NanoStations - all seemed OK however I experienced a significant drop in download and upload speed. At Station end of the connection I have an Asus wireless router to provide wireless service to that location. Any thoughts as to what might cause a big reduciton in speed ? Thank you - the videos were easy to follow and VERY helpfull
Absolutely awesome explaining thank you
You are welcome. Glad the video helped.
WoW...well explained. Quick question are both the device same, i mean can they interchange A become B and B become A as per your explanation. I have a locostation M2 will it work if I buy another device... please suggest.
Yes. They will work. You can also do PTMP. ua-cam.com/video/dUsEy6qg-SM/v-deo.html
Point (Gen2) to multiple point (NSM5). Can you do a video for this.
I have Point to Multi Point video. Go check it out
I set up my nephews internet to run over to his dad’s house using your previous video (M5 Loco). I used my nephew’s small laptop that was hookup to his ISP. Recently I tried to hook up a second location. I thought I had it working until I realized it wasn’t. Well, I think what I did wrong was not updating firmware to match the others. So, I tried to log into both my nephew’s and his dais’s M5 loco with no success. I needed to see what version of firmware they were running before I updated the 3rd. When I pulled up my nephew’s AT&T diagnostic screen, I only found My nephew’s IP address (static). Although, I did see an IP address that the M5 are shipped with (possible conflict). So what am I doing wrong?
15:32 do not open Control panel , easy way is to find free Ubiquiti Device Discovery Tool and this tool found every Ubiquiti device on home LAN , you will see IP adresses and click a then will openning web browser .
At 34:20 you show mode as bridge, I thought that was supposed to be AP? Cheers
Yes. AP for the host unit, bridge for the client unit.
Is there any problem connecting to nsm2 as AP to a locom2 as client? Thanks
Thank for video, I will call you .I want to connect ip camera with this system.
I like your video you really show the teach very smoothly.
I try to set up mind .I will call
My computer tells me the connection has timed out, what should I do?
Reset. Try again.
@@UbergeeksBiz Ok, I did a reset and I get a connection has timed out on my laptop
I can ping nanostation m2 but can not login to the radio so what next
find out the IP, go to control panel, setup a static ip and login in to m2
pls help me