I just got my whole kit for my 2016 turbo rzr 1000 and I have to say that it fit perfectly and my rzr runs so much better much more power breathes much better best addition that I've made to my rzr thank you
Cubic inch x rpms determines whether or not the OEM cross sectional areas of the tube are adequate. Same applies to every other intake component in the system. I'll give a nod towards this being a "quality" upgrade vs. plastic, but it's not a "power adder".
Volumetric efficiency and air speed volume are a measurable formula used when testing these. Not only are they power adder, but more importantly a compounding modification meaning the more you do, the more you'd benefit. Any time we can smooth the air flow, and increase air turbulence, we're going to see gains. Even looking at the oem tubes you can see the corrugated sections and make sense of the air flow disruptions. Combine that with the factory intake tube bottle necking, and yes, power will be had.
I bought one for my 2017 xp4 turbo.. definitely makes a difference didn't felt much HP gain but it does sound way better than stock and breathes better. More air better swooossssh sound 😂
These are all upgrades you must have for the pro xp to perform at its full potential I love the way my machine came alive after installing all these products It definitely wakes up the machine and gives you the most powerIt definitely wakes up the machine Increases acceleration Reduces unnecessary backpressure keeps machine cooler An easy to install
Yes, although the Turbo S doesn't have a intake tube issue like the Pro's do but we do sell the charge tubes and BOV for the S on our website! RPMSXS.COM
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
I just got my whole kit for my 2016 turbo rzr 1000 and I have to say that it fit perfectly and my rzr runs so much better much more power breathes much better best addition that I've made to my rzr thank you
Thank you!
Cubic inch x rpms determines whether or not the OEM cross sectional areas of the tube are adequate. Same applies to every other intake component in the system. I'll give a nod towards this being a "quality" upgrade vs. plastic, but it's not a "power adder".
Volumetric efficiency and air speed volume are a measurable formula used when testing these. Not only are they power adder, but more importantly a compounding modification meaning the more you do, the more you'd benefit. Any time we can smooth the air flow, and increase air turbulence, we're going to see gains. Even looking at the oem tubes you can see the corrugated sections and make sense of the air flow disruptions. Combine that with the factory intake tube bottle necking, and yes, power will be had.
I bought one for my 2017 xp4 turbo.. definitely makes a difference didn't felt much HP gain but it does sound way better than stock and breathes better. More air better swooossssh sound 😂
Mine sounds kinda screaching and low speeds is that normal?
What HP gain by adding these?
These are all upgrades you must have for the pro xp to perform at its full potential I love the way my machine came alive after installing all these products It definitely wakes up the machine and gives you the most powerIt definitely wakes up the machine Increases acceleration Reduces unnecessary backpressure keeps machine cooler An easy to install
“Wakes up the machine”…. You must get 2 or at most 3 HP with this stuff. The placebo effect is real 😂😂😂
Lol
Anyone know if the intake tube will work with a particle separator?
My J tube only has one hole for the sensor and it won’t line up
You can rotate the sensor bracket in the port.
Awesome !
Does this need a tune ?
No tune needed!
Is this just for sound or does it actually provide hp gains?
The tubes or the BOV? the tubes prevent all kinds of issues the stock ones have. the BOV replaces the factory problematic plastic one.
Is there one of these that fits the 21 RZR Turbo S??
Yes, although the Turbo S doesn't have a intake tube issue like the Pro's do but we do sell the charge tubes and BOV for the S on our website! RPMSXS.COM
I want one of your tee shirts
We should have some available on the site depending on your size! Black Friday is coming up too! 😉
I like to use spit.
He said dinky lol 😝
The cut man I know those