This was causing Hanbell issues
Вставка
- Опубліковано 18 жов 2024
- Another service call came through for this Hanbell built up system with a MCS control panel. I had to make some adjustments to the oil level to help, but our intermittent issue showed up.
Needing service software? Reach out to Field Pulse to get started, fpul.se/HVACTime
Get 8% off at TruTech Tools with promo HVACTIME
www.trutechtoo...
Get tech support, training, and the Tech Blog at hvactimetx.com
You can contact me at Hvactimetx@gmail.com
Support my COFFEE problem through,
venmo.com/code...
Zelle @ Hvactimetx@gmail.com
And don’t forget that for oil separator to work correctly you need velocity of the refrigerant.
High head is kinda impeding the velocity ( kinda because it’s not really a high head - put pressure differential).
Always interesting and good stuff, nice job Holden!
Good catch on this one
2:20 - how did four extra gallons of oil get into this system?
Nice catch 👍👍
Nice catch mate 👍
Do you have a part number for the clear refrigerant hose by any chance ?
Can someone explain how you check level with hooking a hose between oil separator to the discharge. How would you read the level?
Might be a basic question, but where did you find the clear vinyl hose you are using to check the oil level? Is it anything special or just typical vinyl hose?
May need a relay upgrade. Could be undersized for the load.
nice one!
Install SPD parallel to the contacts. They will last longer.
Can i know about Trane Rthf chiller oil circulation.