Don't forget to Subscribe to our UA-cam channel: bit.ly/2NtrboD Learn more here: bit.ly/2Valco0 Need help? Contact us via Facebook Messenger: bit.ly/2pm7tfV Follow us also on Facebook: bit.ly/1MBfTD3 Twitter: bit.ly/2Ql1SGP
@@fiorecaggiano8842 Hello Fiore, may we know the mobile device you are using? Could you please send the details as well as the screenshot of the prompt on your mobile device to us via email support@dji.com? We'll do our best to help.
Hi, thanks for the video. But I still don't understand whether or not it is necessary to enter the coordinates in the DRTK2 station. According to the video, for a specific job, the devices are linked without doing anything at the DRTK2 station. Is what I'm saying correct? Is it necessary to take the point with its own station in rover mode on foot and enter it to carry out the RTK flight with the drone?
I have the 210 RTK and have been given no information regarding the GNSS receiver and what it does. Does it help with accuracy when carrying out photogrammetry and will it help show contours and elevations as we want to make 3D photographs of building sites for planning purposes?
at a fixed antenna height you should just enter the ground height under the spike, the system should compensate the elevation change, if not then a global shift wont be difficult if you have the height difference between the base point and what the model comes out at but it wont be necessary
Thank you very much. I have a 210 matrix with rtk, but this does not record the position in the photos I capture, I would like to know what I can do to achieve it, whether it is possible or not or what additional element I should buy to write the position of the rtk in the photographs, to perform photogrammetry
Hi Elkin, just to verify, are you referring the issue that the RTK Flag is 0? If yes, our engineers have aware of this issue and are working on it, this issue will be fixed on the next firmware. Please kindly wait patiently. Please let us know if we misunderstood the case. You can keep us updated via email support@dji.com.
when we use Matrice 300 RTK with D-RTK 2 Mobile Station for matrice series Does it necessary require an internet connection will the RTK work in Area where there is no internet or even mobile phone signals ???
Is it possible to use this completely indoors without an external GPS signal at all? For example, could you manually set the base station coordinates to a known fixed point inside an aircraft hangar and have GPS work on the drone?
I’m constantly losing connection and forced to switch to PPK. That’s a problem because not only is this slower it also loses accuracy. Please help. I’m inside a city and not in a suburban area.
Hi, it is suggested setting up the D-RTK 2 Mobile Station in a high place and open area to avoid the obstacles and interferences around. If it keeps disconnecting, please connect the Matrice 210 RTK V2 and the mobile station to DJI Assistant 2 to export the data for us to investigate the details. You can send the details via email to support@dji.com.
Don't forget to Subscribe to our UA-cam channel: bit.ly/2NtrboD
Learn more here: bit.ly/2Valco0
Need help? Contact us via Facebook Messenger: bit.ly/2pm7tfV
Follow us also on
Facebook: bit.ly/1MBfTD3
Twitter: bit.ly/2Ql1SGP
Good evening I have a 210 rtk v2 matrix I can't connect it in custom network, I tried wifi with dongle but it always tells me no connection why ???
@@fiorecaggiano8842 Hello Fiore, may we know the mobile device you are using? Could you please send the details as well as the screenshot of the prompt on your mobile device to us via email support@dji.com? We'll do our best to help.
Upload a video with the custom network function
on the matrix and see if it works just tell lies.
Hi, thanks for the video.
But I still don't understand whether or not it is necessary to enter the coordinates in the DRTK2 station.
According to the video, for a specific job, the devices are linked without doing anything at the DRTK2 station.
Is what I'm saying correct?
Is it necessary to take the point with its own station in rover mode on foot and enter it to carry out the RTK flight with the drone?
why do we need to key in input for coordinate manually?
I have the 210 RTK and have been given no information regarding the GNSS receiver and what it does. Does it help with accuracy when carrying out photogrammetry and will it help show contours and elevations as we want to make 3D photographs of building sites for planning purposes?
I want to enter the base point mark, should I take into account the height of the mobile station?
at a fixed antenna height you should just enter the ground height under the spike, the system should compensate the elevation change, if not then a global shift wont be difficult if you have the height difference between the base point and what the model comes out at but it wont be necessary
Thank you very much. I have a 210 matrix with rtk, but this does not record the position in the photos I capture, I would like to know what I can do to achieve it, whether it is possible or not or what additional element I should buy to write the position of the rtk in the photographs, to perform photogrammetry
Hi Elkin, just to verify, are you referring the issue that the RTK Flag is 0? If yes, our engineers have aware of this issue and are working on it, this issue will be fixed on the next firmware. Please kindly wait patiently. Please let us know if we misunderstood the case. You can keep us updated via email support@dji.com.
when we use Matrice 300 RTK with D-RTK 2 Mobile Station for matrice series
Does it necessary require an internet connection
will the RTK work in Area where there is no internet or even mobile phone signals ???
Is it possible to use this completely indoors without an external GPS signal at all? For example, could you manually set the base station coordinates to a known fixed point inside an aircraft hangar and have GPS work on the drone?
Hi Colin, we're sorry that it is not recommended to use D-RTK 2 Mobile Station indoors.
@@DJISupportGlobal Okay, thanks for the reply!
I’m constantly losing connection and forced to switch to PPK. That’s a problem because not only is this slower it also loses accuracy. Please help. I’m inside a city and not in a suburban area.
Hi, it is suggested setting up the D-RTK 2 Mobile Station in a high place and open area to avoid the obstacles and interferences around.
If it keeps disconnecting, please connect the Matrice 210 RTK V2 and the mobile station to DJI Assistant 2 to export the data for us to investigate the details. You can send the details via email to support@dji.com.
Where can I download the app that connects to the rtk station?
Hi there, should you encounter any difficulties, please feel free to contact us via www.dji.com/support, we'll do our best to help you. Thanks.
Any support / tutorials available for modes 2 and 3?
Hi there, may we know the specific issue that you encountered? You may contact us via www.dji.com/support for help, thanks.