Ambilight LED DIY | WS2812b(Neopixel) | Arduino Uno Project (without soldering | How to make )
Вставка
- Опубліковано 19 лис 2024
- Here is the way to make Ambilight in low cost. Just follow few steps. You will get a beautiful monitor by yourselves!
All in one kit: s.click.aliexpr...
[Parts List link]
eunchan.me/Amb...
I made this tutorial without any soldering.
1. Download Arduino IDE
www.arduino.cc...
2. Download Driver CH340
www.wch.cn/down...
3. Download Source code
github.com/Wif...
4. Open the Source Code
Modification NUM_LEDS, DATA_PIN 56, 5
5. Install FastLED library
6. Compile and Upload
7. Lightpack Download & Install
github.com/psi...
Copyright comment :
color test videos from
Eyejoker ( • [배틀그라운드](솔로) 실력자인줄 알았는... )
Song: bad kult - Made Of Something (feat. Will Heggadon) [NCS Release]
Music provided by NoCopyrightSounds.
Korean national anthem ( • 2014 애국가 KBS | 'Aegukg... )
ETC, ( • Video )
#arduino_project_for_beginners
One of the best and easy way to ambhlight setup many thanks..
SIR !!!!! I JUST FIXED MY LIGHTBOX WITH THIS
Great stuff. Please let us know if this will work without casting from computer. Thanks
Excellent tutorial, I have one question, what size end caps did you use? 1.25mm/2.5mm/5.5mm?
hi, it seems 2.5mm. when you put the 2 cables together, you will check the endcap is fit for them. if it is not, try bigger or smaller one. Thanks :)
Hi i got a question, i have bought 60 leds on 1 metre and i will use 1.80 metres of the leds, i'v also bought an adaptor which is 5 volt and 5 amper. If I do it like yours will it burn ? or shouldn't i attach 5 extra volt to arduino and just feed it from adaptor ? help please.
6:45 "uh oh if i've gone this far i'm pretty much married to it now"
와 10분만에 엠비언트를..!! 이번에도 감탄하고 갑니다! ㅎㅎ
그나저나 처음에 나오는 청소년 관람주의 영상이 너무 향수를 자극하네요😂😂
청소년 관람주의인데 그 영상 자체가 뭐시기 하네요 ㅎㅎ 감사합니다. :):)
Eunchan Park 하하 그러게말이에요... ㅋㅋㅋ
영상 수십번 보면서 잘만들어서 사용중에 있습니다~ 아두이노가 뭔지 이번에 처음 알았고요 ㅎㅎ 초보자도 무리없이 할수있도록 설명잘되어있어서 큰 어려움없이 잘했습니다. 도움많이 되었습니다~감사해요
도움 되셨다니 정말 너무 기쁘네요. 사용중 문제가 생기거나 하다면 댓글 달아주세요. 사용하지 않을 때는 전원을 빼는 것을 추천드려요. 아무래도 DIY니까 위험할 수도 있으니까요. :)
이현준 제가 여행중이라서 답글을 제대로 달아드리려고 했는데 이제서야 봤어요~
can we use ws2811 instead of ws28112B led strip ? does it work , or it will need some changes in the code ? please tell !
Thanks again for answering , If I understating it good , I did try other cable but not any change .only thing that i didnt try yet,testing with other Arduino UNO is , maybe i need pay a new one .
I am sorry to hear that. I wish I could see yours. your arduino seems working well but I think the cable or the LED strip causes the problem.
Simple and to the point, thanks! Quick question, did you try this on a multi-monitor setup? Can you select more than one monitor in the LED light software? Thanks!
Hello, Thank you for the comment, I haven't tried it with a multi-monitor. unfortunately, I don't have the led anymore so I cannot test it anymore.
@@EunchanPark No problem. I might give it a shot and see. Thanks!
Was going to follow this guide, bought led strip and connectors. Tried powering the led strip first, but i didn’t get any light despite being connected to a power source, is it neccessary to use arduino to lightup the addressable strip, or did i get a defective led strip? Any help would be appreciated
Hi. You are right. This kind of LED strip is digital led which needs to get data from Arduino. You can test this strip with either this device amzn.to/2LCeRxj or Arduino.
thanks for answering, was wondering if i got a defective strip. also, thanks for this guide, finally found a guide that does not require soldering, which is ideal for beginner DIYers like me.
I am so happy my video helps you!! Your feedback really helps me. I don't like soldering neither. I'd like to make tutorials as simple as possible. I will make another tutorials like in this way. Thank you :)
And if you have any question, please feel free to leave a comment. I will do my best for it
Can you answer one question? Why you didn't use the Power connector on the arduino for 5v? Instead of it, you made one stand alone
EunChan Park, you have listed in the required parts an Elegoo Uno board, this is not needed if we use Arduino Uno board, correct?
yes right
Thanks, nice work, i did exactly what you did ( same material too ), I also get a new port, but if I connect red cable with 5 volts and white to GND on Arduino, the new port will be gone and I will no longer are able to connect. and again when I disconnect red or white cable, I have a new port again, I do not know why? can you please help me?
Hi, could you try without connecting the LED strip?
and could you try connecting them with external power?
Thanks for a quick response. yes I can connect with LED and external power .i did check every things again and i uninstall all of software and install it again not any change .
how about try only with the cable? if the cable is short each other, the arduino cannot operate properly.
와ㅡ 찾았다ㅜㅜ 내가 원하던 영상!! 감사합니다ㅜㅜ
Hi, I have also built my own ambilight using ws2812b LEDs, Arduino UNO, Adalight and the forked version of Prismatik. It works like a charm. But somehow it does not work with fullscreen games... Do you know how to solve this issue?
Hello, I personally don't play games. so, I cannot give you any information. hmm.. but have you taken a look options in the application? sorry for not helpful comment. if you have a solution for it, please share with me :) thanks
I think I found the reason! It really does not support fullscreen. But if you play your games in borderless windowed Mode it will work just fine. Nevertheless, thank you for your response :) Great video btw!
Thank you for the reply. Good to know it. If I have any further information, I will share with you. Thanks!
Technically, it's solderless, but it is about as difficult to make unless you don't have a soldering tool.
niceeee thanks. bro!!
I will check it again later. and I will test everything. I am sure you have right about it, thanks.
I did by accidentally switched red cable 5v to 3.3V ( on Arduino )and it just worked, I do not know why, do you have any idea?
it is very weird. it seems not normal situation. I cannot say that is safe.
have you just attached cable without connecting the led strip?
ua-cam.com/video/-UZq92TpUqQ/v-deo.html just at this, could you connect the cable with arduino and test it?
test list.
1. arduino with PC USB
2. arduino with PC USB, with cable, without DC power, without LED
3. arduino with PC USB, with cable, with DC power, without LED
4. arduino with PC USB, with cable, with DC power, with LED
I followed your advice and then I also replaced all cables and I used an old software from Arduino(1.8.6) And now work everything, thank you very much for help and your time. God bless you.
Any noticeable delay with this setup related to screen colors and light strip?
Hello, thank you for this tutorial, can we do the same with an Arduino Nano?
yes you can use nano as well
Thanks you for the answer @@EunchanPark 👌
Great video. Did this work with simple Tv channels ? Or it's only work with PC? Thank's
thanks. this is for PC. There is a ready to use product on the link. you can just buy that instead of making this. but the making is also fun though. :)
Hey man, what kind of arduino board do you use?
eunchan.me/Ambilight-LED-DIY-7d3cdabd2ff044b7a2592fe2a9ddee45
Here's material list. Please take a look the link. Thanks.
hello sir, will it only work with charger and connect it with 5v pin of Arduino nano? will it work?
Hi!. Great video. But i have a doubt. Waht strip are you using? RGB (or RGB+W) have 4 (or 5) pin?
perhaps.. i understand.. are "new" strip (strip led ws2812b). my last buy was a normal 5050 (so with 2 pin, for White, and 4 pin for RGB).... i suppose this is a new model where is necessary only "one pin" to send data color cominations .. right?
@@embassy811 WS2812B has only 3 pins. 5v, gnd and data. you are right.
모니터에 제작후 앰비라이트란것에 관심이 생기니까 tv에도 해볼까 하고 있는데..영상에서도 설명해주셨듯이 아두이노와 컴퓨터 프로그램이 통신을 하여 화면색상을 입력받아 led에 표현해주는걸로 이해하고있습니다. 그런데 TV는 컴퓨터처럼 프로그램을 실행시킬수가 없는데..TV에서도 앰비라이트를 사용할수있나요..?
안녕하세요, 그부분은 제가 확인하고 나서 다시 댓글 달아드릴게요:) 일단 이번 영상의 방법으로는 안되고요, 중간에 영상 신호을 따오는 방법을 써야할것 같아요. 간단하다면 다음 영상 소재로도 좋겠어요ㅎ
우오오~~기대기대..ㅎㅎ
TV에서 앰비라이트 하는법이 있긴있습니다만 완제품 lightpack이 있습니다 가격은 십만원정도 되는거 같습니다 tv에 outport를 이용해서 hdml로 화면을 내보내서 led를 표현하는 방식인거 같습니다
자작하신다면 아두이노가 아닌 라즈베리파이로는 가능할거같습니다
So what did you do there @ 4:57 with the part you cut? You kinda skipped it.. (Plus,I'm doing this for a 4K QLED tv I plan on buying)
Hello, I just cut the LED strip. and done. nothing happened :)
Port number doesnt change still show COM1. Do you have any idea?
Great job! Would this work with an Arduino Mega?
Hi, Thank you for your comment! Sure, this must be working with Mega. Most codes for Uno work for Mega usually. Do you have a Mega board?
Yeah, I have two mega boards I could use...
it must be working. I will test it tomorrow. :)
Hi, I tested it. it is working perfectly. Thank you !
EunChan Park, I need some help. When all is set up, the power supply is only hooked up to the LED strip, right? Not to the Arduino board? So the board is getting power from the wiring we did at the beginning of the video?
Arduino is powered from usb
@@EunchanPark same time as led?
@@xp3506 both are okay. Extra power is always needed. You can connect extra power with 5v line in the Arduino
I have a 27 inch display.
I need a strip of 2 meters to cover the entire monitors, I would like to use two strips of 1 meter with 60led each, so 120 led in total.
Is this guide ok even for this configuration?
Yes but I highly recommend you to buy this SMPS so that the LED can operate properly. amzn.to/2PuRgoh
This is made using 30 LEDs per meter tape, right?
Can you modified or tell me what I need to remove or change in the sketch in order to remove any flashing or any led lights turning on while waking or turning on computer. Ideally I want leds to turn on only when i start ambibox screen grabbing
hello, hmm.. I don't have any idea about it. I will take a look at it.
안녕하세요. 블로그에도 문의 드리긴 했는데요몇 가지 질문이 있습니다.
1. 55초에 나오는 전선은 Jumper cable을 잘라서 하면 되는건가요? 아래 주소 상품 구입해서 사용하면 되는건지요?
smartstore.naver.com/mechasolution_com/products/2885763170?NaPm=ct%3Djp9s7lcg%7Cci%3Dcheckout%7Ctr%3Dppc%7Ctrx%3D%7Chk%3Dab82fb99dffb84a0c9642721e2e195d449dc7bfd
2. 엔드캡은 사이즈가 3개 있는데 가장 작은것 사용하면 될까요?
3. 2분3초에 보면 led바와 흰색,빨간색 케이블과 커넥터가 테이프로 감겨져 있는거 같은데요 여기를 어떻게 하신건지 잘 모르겠습니다. ㅜ
4. 흰색 빨간색 케이블은 어떤걸 쓰신건지도 잘 모르겠습니다. 이것도 점퍼 케이블인가요? 점퍼 케이블에서 빨간색, 흰색을 골라 쓰면 되는건가요?
초보라 질문이 많네요 ㅜㅜ 도움 주시면 감사 하겠습니다.[출처] 아두이노 LED 예제) 모니터 후광 앰비라이트 DIY (WS2812B, 아두이노 우노) 납땜 없음|작성자 happyThingsMaker
한국 분께서 댓글 달아주시니 정말 반갑네요!! ^^
1. 네 맞습니다. 점퍼와이어 잘라서 사용하시면 됩니다. (옵션은 F-F로 구매하시는게 좋을 것 같네요. )
2. 엔드캡 대신에 그냥 절연 테이프로 해도 됩니다.
3. 테이프로 감겨있지 않습니다 ^^;;;;
4. 모두 점퍼 케이블입니다.
@@EunchanPark ㅎㅎ 빠른 답변 감사합니다. 그러게요 외국 분들한테 인기가 많으시네요.
그럼 led바하고 커넥터하고 점퍼 케이블 2가닥 잘라서 어떻게 연결을 하는건가요?
@@설딩온딩 영상처럼 연결 하시면 됩니다. 스트리퍼로 피복을 벗겨낸 뒤, 색깔에 맞춰서 연결하시고 절연테이프로 절연을 해 주면 됩니다. 피복이 벗겨진 전선이 서로 붙어버리면 안되는데요, 서로 붙는걸 방지하고자 절연테이프로 감아주는 것입니다. 또는 3mm 정도 되는 엔드캡을 구입하셔서 영상처럼 연결 하시면 됩니다.
첫 번째 댓글 살짝 수정했습니다. 구매 옵션이 있더라고요 ㅎ
@@EunchanPark 아 넵 그리고 제가 구매한건 미터당 60개짜린데 그럼 수량을 거기에 맡게 custom 해주면 되는건가요?
do you have a video suggestion how to make this work with my tv ? bought al the stuff and realized it need to be plug in to my pc.. thats actually not what i was hoping :/
this is only for the monitors. sorry.
i Just made it and its really looking awesome but i have a problem!
Some leds wont respond according to color pixels in screen, i looked closely at them they do turn on but have very low brightness and wont change color correctly. So what could be the reason??
I am using 104 Leds setup and 6A external power adapter.
use 8a Power supply
prismatik is great but it takes up a whole load of processor power
that's true. you might need to adjust frequency in the application. it reduces its consumption of power
Hey I followed this guide, but when I put the red cable in the 5v pin, the Arduino immediately disconnect and gets hot. I have no idea what I'm doing wrong :(. Perhaps my LEDs are wrong?
could you check the red and white wire with a multimeter? it seems to need to check the voltage level. if everything is right, it must shows 5v.
and please make sure that the wire from USB charger is right. ua-cam.com/video/-UZq92TpUqQ/v-deo.html make sure that connect the cables right side. for example, the outer side of DC jack is ground. and the center pole is 5v.
But how the led strip will work with LED screen because the no wire or cable is connected between LED tv to Arduino? And please tell about the all connections specially connection between LED tv to Arduino. Please fast
The arduino has to be connected via USB (the blue cable) to your PC at all times in order for it to work.
nice work.
usb충전기 링크가 연결이 안됩니다ㅠㅠ
LED를 2m 30구짜리 쓰려고하는데 usb 충전기 2A이상인거 써야 하나요?
Hello ,
I follow the step and make all the things prepared ,but I can not make the lighting effect work . Can you help me ? Or how can I contact with you ? Are you from China ?
Hi. I am South Korea.
Could you tell me more detail about it??
did you check all the cable?
I don't know how to connect the arduino and the computer screen . Should I use PMW ,HDMI or other ?
Hello, I don't understand your question. You can use your PC screen. Arduino and the screen don't connect each other :)
@@EunchanPark Dude i was right about to set white balance and when i try to do that device disconects and COM3(for me) is no longer visible, i reatach usb cable to pc and when i go to white balance stage it auto disconects something and led only show red color. pls help kind sir
@@gigicho21 hello, have you connected the arduino with external power? how many LEDs do you use? you have to CONNECT EXTRA POWER before you do it.
When I go to the step the adjust the White balance, nothing happens for me.
Dear All I did all the steps as mentioned and everything is fine up to led zone placement. white balance no lights are showing. When i put on red, green and blue light blinks and goes off (using ws2812b 300 led)
maybe, you will need to check COM port (port number and communication speed(baud)).
What external Power supply are you using?
because you need like 72 watts for 300 leds
How u made connections??
Can u show me where i can buy all of this item in Korea ?
Thanks u
Hi, when I was in Korea, I would buy parts from aliexpress. I wrote the link in the below page. Thanks
sites.google.com/view/100happythings/importworldmake/ambilight
EunChan Park yep thanks u
i want use this for my tv, to work with this is necessary to be connected to a pc?
hello, yes. it is only for PC. if you use your TV as a monitor, it is okay. If you want to use it with a cable TV, unfortunately, can't
Pleeeeease answear this:
I have a 34 inch Ultrawide monitor 3440x1440
And I want to do this but I saw that there is a all in one kit that looks easier, do you know if I can use that kit with that kind of resolution, could you please double check on the software thát you are using if that resolution is supported, cause im about to buy this, and I would like to buy the all in one kit
well, I don't have the project anymore because I reused the led strap. I think the kit would work well with your monitor (not 100% sure)
Hi I would like to do this on 5m ws2182b 60/m leds so is one power supply enough to power full 5m strip? I won't be cutting as it will be around the edges of my projector screen
hi, the power may not be enough for the purpose. 1 ws2812b has 3 LEDs and one LED consumes approximately 20mA at the most blightness. So, 20mA * 3 * 60 / m * 5 m = 18A. Powerful SMPS needed for your purpose I guess but I haven't tried that kind of load of current. And there is some tips for operating a long WS2812B strip in UA-cam. For example, giving them power middle points every few meters. Please refer to here learn.adafruit.com/adafruit-neopixel-uberguide/powering-neopixels
Does this work with Android TV's?
And the video signal comes from where? and gets sent to the arduino how? and the power supplied to all those LEDS comes from where??
Hi, in this ambilight, PC will be the main controller for the LEDs.
PC has an application for getting information from screen. and send signal to the arduino.
power is from the USB charger.
Hey is there any difference in brightness with ws2812b 5v and ws2811 12v? I have use ws2811 to my table and thinking to make ambient light ws2812b for monitor
hello, I haven't tried 2811 so I couldn't tell you about it. if you tried, please share the result :)
@@EunchanPark i see. Btw, i look at ur list part. There have 2 uno version, one is Chinese version.. Are they still same? I got that Chinese version in my country.
yes you can use Chinese version but you will need to install an extra driver(ch340)
@@EunchanPark ok, can i adjust brightness led?
@@manssupar if you wanna adjust, you will need to add some code
I did exactly same as you but mine is 114 led and the light is not even turning on
Is the mobile charger can't supply power enough?
One thing, whenever i connect the LED 3 pin to arduino, the arduino automatically disconnect from my computer. Is that normal? Hope you can answer soon
oh I am sorry my late reply. it seems somewhere in your board, there's short between 5v and gnd. please don't plug the usb into your pc anymore before you solve the problem. if you have a multimeter, please check connections. please check without and with leds. usually, soldering LED could be in wrong way so, the power and gnd line could meet together which causes a problem.
@@EunchanPark thanks for reply, but i dont know why i cant even need a mobile charger for it, I just connect the led to arduino and plug the arduino to the usb port on my PC and it works fine :)
what does mean by "why I cant even need a mobile charger for it" ?
also, you said
"I just connect the led to arduino and plug the arduino to the usb port on my PC and it works fine"
but you also said
"whenever i connect the LED 3 pin to arduino, the arduino automatically disconnect from my computer."
Sorry i don't understand above question correctly,
does that mean,
1. LED is already plugged on the arduino board
2. you plugged usb into PC
or
1. led is not connected with arduno board
2. you connected arduino to pc
3. you connected led to arduino
(this way is not recommended)
by the way, 114 led are somehow too many for a usb port. you might need more powerful source for it.
@@EunchanPark sorry for my bad English :(
it's mean:
1. LED is connected to the arduino board
2. I plugged usb into PC
and everything work smoothly without another power source for 2 months
The problem happens whenever I connect it to mobile charger.
Like you said it seems somewhere in my board, there's short between 5v and gnd.
Should i fix it or continue using it with the power from PC's USB only?
if it works find, you don't need to use the mobile charger at all. ;)
will this method work with 4k 60kz monitors?
hi :) I've seen a youtube video of 4k and 60hz. it might be possible.
Is it run in 4k uhd tv?
HOW DOES THE ARDUINO CONNECT WITH THE PC
I FOUND IT
THE ARDUINO IS CONNECTED WITH THE PC USING A USB CABLE
very sorry too late reply, yes, it's usb
@@EunchanPark NO PROBLEM MAHN. I MADE THIS SETUP AND NOW IT IS LOOKING GREAT ON MY MONITOR
I can used on my TV without computer ?
hi, this tutorial is only for PC. maybe next tutorial is for a TV.
Please make a tutorial for tv !!
hello, ua-cam.com/video/ZCVfZb4UoO4/v-deo.html it could be the one.
but I haven't tried it yet
is that a tv or computer screen ?
hi, this is my monitor for PC
영상 후반부쯤 아두이노 셋팅시 데이터 핀이 5로 들어가는 이유좀 알수있을까요??
안녕하세요. 사실 다른 핀으로 해도 상관이 없습니다. :)
@@EunchanPark 답변 감사합니다^^
Respekt 👍👍👍
Maybe someone can help me: I have 266 LEDs and an arduino clone with CH340. After uploading the sketch with IDE all LEDs are flashing for a second in green, blue and rad (don't remember the exact order). I follow the steps with the lightpack, but the leds stay dark. What can i do? com port is correct and baud rate is 115200 (same as in the device manager).
266 LEDs? it is too many LEDs. I haven't tried it before. you need to be extremely careful then you use the LEDs with your power.
What power do you use? the power must be enough to turn them on together.
If the LED turn on each colors, it means that the arduino is running well. you will need to check the lightpack application.
You will need to check the COM port number.
Se puede usar arduino mega o arduino nano?
네, 아두이노 메가를 사용할 수 있습니다. 아두이노 우노도 가능합니다.
Led strip and arduino setup to tv casting screen from pc it's work or not?
hi, I am not sure about that environment. If you try that, please let me know the result :)
@@EunchanPark sure now Iam working in that well completed will post a video
Thx
안녕하세요 은찬님 궁금한게 있어서 여쭈워봅니다 1m 당 60개 달려있는 네오픽셀도 써도되나요?
네, 되긴 합니다만 갯수가 늘어난만큼 조치를 취해야합니다. 전원도 좀 신경을 써주셔야 할거에요. 갯수를 똑같이 한다면 곧바로 사용하실수 있습니다.
그럼 usb전원으로 사용하지말고 다이렉트로 5v어댑터로 연결해서 사용해도 무관하겠죠?
어댑터 전원은 반드시 사용해야 합니다. usb 는 아두이노에게 신호만 전달하는 용도로 사용하시면 되겠습니다. 예전에 어댑터 없이 할 수 있는 튜토리얼 올렸었는데 아두이노 태워먹었다는 사람이 항의를 해서 영상 내렸었죠 ㅠ
LED 몇 개 정도를 생각하시는지요?
led는 24인치 기준에 맞출려고 합니다 원래는 은찬님이 올려주신 해외직구링크 통해서 구입하려고 했는데 해외직구 하기 힘들어서 네이버에 찾아보니까 네오스틱 2812b 1m당 60개 짜리 5미터에 3만원에 팔고있어서 이걸로 사려고 합니다.
아 그리고 말씀드린 usb전원은 핸드폰 충전기를 사용하지않고 dc power plug에 다이렉트로 5v짜리 어댑터를 사용해도 무관하죠?
Would this work fine on a 2k monitor?
With 165 refresh?
165 is too many for the power.
I only used small amount of LEDs because of the power
@@EunchanPark 165Hz is too much for the power of the LEDs?
@@danzbyrd you mean that 165Hz? I don't know much about the Hz but 165 LEDs make power problem.
anyway, remember that the more frequent refresh, the more pc resource needed.
Can be done same thing but for Tv??
Well the question actually its different. My laptop its always connected thru HDMI to laptop. So if i connect arduino to laptop with the monitor off but tv on while its connected to tv will work ?
@@stefanvalentin1474 you mean, you want to use this with TV with HDMI? it will work
@@EunchanPark thank you.
Comment on connecte le uno a la télé pour que sa marche.merci pour votre aide
컴퓨터가 반드시 필요합니다. TV와 바로 사용할 수는 없습니다.
if i have original arduino need install ch driver?
hello, if yours is original, you don't need it :)
It is work wheth TV
You need to use pc anyway. It is for a monitor
궁금한점이 납땜없이 할 경우 단점은 없나요?
물리적인 힘으로만 고정되기 때문에 제대로 고정이 안되어있다면 나중에 문제가 될수도 있습니다.
그래서 영상 중간에 보시면 도구를 이용해 단단하게 찝는 과정 후 잘 고정되었는지 확인하는걸 보실 수 있습니다.
또한 저 엔드캡이 살짝 부피가 큽니다. 그래서 아주 작은 로봇 프로젝트에는 적절하지 않을 수도 있습니다.
반면 납땜방식은 손이 많이가고 후처리(테이프 감거나 수축튜브를 이용) 해야히는 번거로움이 있습니다.
댓글 감사합니다 :)
Can i connect it with android tv??
I am afraid that won't work.
Hello. Can work with sk6812 rgbw?
hello, I have no experience with the sk6812 but, if you can change code for sk6812, I think it is possible. but I am NOT sure of it because I haven't tested yet.
What about the adaptor.its 5v or 12v
it is 5v. like a USB charger
This method work in TV?
hi, this method is only available for PC. I will make another video for TV later. It takes time I think. :) Thank you
Thank you for reply...... Please make TV ambition light video soon...
I also am awaiting your light kit for regular television. @@EunchanPark
oh, I am sorry that I cannot figure out how to. I will try it later :)
@@EunchanPark Is doing this on TV even possible? You'd have to install some software on the tv right?
I did, but i have a problem. Can u help me ? :((
yes of course. I will help when I will come back from my trip. :)
no. i mean
the led color is wrong. while the srceen is red - green, the leds turn green - red. Is that led's problem?
sorry my english skill is not good. thanks for your times :)
Hi, let's check one by one.
Question 1 ) Did you put your LEDs like this moment? ua-cam.com/video/-UZq92TpUqQ/v-deo.html
Question 2) Did you setup properly like this moment? ua-cam.com/video/-UZq92TpUqQ/v-deo.html
can you build this and send it to me ill pay you. This seems like mad work
PC에서 보는 넷플릭스도 사용가능한가요?
TV는 아쉽지만 안됩니다. ㅠ pc 어플을 구동해야 하는 거라서 PC가 반드시 필요합니다.
부품 구매하여 전부 똑같이 진행하였는데요..왜 실행이 안되는걸까요 전원선과 PC에 아두이노 보드 연결용 USB까지 꼿으면LED가 초록색 파란색 빨간색 한번씩 들어온뒤 작동을 안하네요...컴포트는 확인하였는데 잘 인식되구 있구요
안녕하세요, 답변이 잘 안달렸네요. 음.... 어디서부터 잘 안되는지 전반적으로 하나씩 짚어가면서 봐야할 것 같아요.
프로그램은 다운 받으셨죠? 아두이노에 업로드까지 하셨고요?
@@EunchanPark 네 업로드와 컴파일까진 잘되었구요
스크린모드로 작동시 led 126램프에서 작동을 안하구요
모드램프로 변경하여 작동 하연 126램프 색상변경되면서 작동합니다
아답터는 5v5a 이구요
모니터는 32인치이며 pc와 연결하는 케이블은 HDMU-DVI 변환케이블 사용하였습니다
LightPack 은 잘 설치하셨죠? 컴포트 및 통신 속도도 잘 하셨고요?
@@EunchanPark 네 영상에 나온거랑 똑같이 진행하였어요 어디서 문제인지 가늠이 안되어서.. 동영상 찍어놓은것도 있는데 보여드릴수가없네요;
@@mrheo4760
1. 엘이디 고장은 아닌 것 같아보이네요
2. 엘이디가 초파빨 한번씩 깜빡이는 건 처음 아두이노가 켜질 때 테스트용으로 한 번씩 하는거거든요. 즉, 아두이노에 프로그램은 잘 구워진 것으로 보입니다.
3. 라이트팩 - 아두이노 간 문제로 보입니다. 라이트팩에서 아두이노의 포트 명을 제대로 기입해 주셨는지, 통신 속도는 맞는지 다시 한 번 확인해 보시고, 혹 포트 명이 바뀐 것을 반영 안하셨을 수도 있습니다. 라이트팩을 중점적으로 확인해 보세요
prismatik screen grabbing not working
I did so in the video but it did not work. My fps screen data does not work
please help me :(
hi, have you tried Prismatic with other computers?
@@EunchanPark
I tried with the amibox software it was working. primatik not working :(
@@hahaitran5351 hmm.. I don't know about the problem. have you tried the programme with other PC?
would you try Primatik running as Administrator?
It sais: avrdude: ser_open(): can't open device "\\.\COM3": Zugriff verweigert
Problem uploading to board. See www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
What could be the problem?
이거 알리에서 기성품 3만원에 샀는데.. 이런 방법이 있었네요 ㅜㅜ
hello....plz someone could tell me
the game he played at 0.23...?
hi, it was "battle ground" www.pubg.com/
티비는 안되는것인가...
Does it works with Netflix, youtube ,amazon prime etc ?
Hello, this is for a pc, if you watch them using pc, it will work. If you are watching via tv app, it won't work.