Це відео не доступне.
Перепрошуємо.
EXPLODING Tyres To Prove Everyone Wrong - Tyre Cage Test
Вставка
- Опубліковано 28 лис 2023
- After feedback that our in house, self built tyre cage was not sufficient enough to withstand 12 tonnes of explosive pressure… we thought we’d put it to the test and inflate a truck tyre till it explodes, to see IF we can prove everyone wrong! Will we succeed or will the tyre cage fail?
#Explosion | #Experiment | #Safetyfirst
:: ASHVILLE ::
waste management | aggregates | concrete | construction | plant hire
IG @thisisashville
FB @thisisashville
TikTok @thisisashville
X @grabhirelondon
Aggregates » ashvilleaggreg...
Construction » ashvilleinc.com
Concrete » ashvilleconcre...
Plant Hire » ashvilleplanth...
Entertainment » thisisashville...
:: DANIEL ASHVILLE LOUISY ::
Entrepreneur | Presenter | Digital Creator
IG @daniellouisy
FB / danielashvillelouisy
TikTok @daniellouisy
X @daniellouisy
danielashville...
Daniel took the comments about the tyre cage personal, made a whole stand alone video to prove people wrong.
Love the fact he did this but generally the majority who have watched and watched long term know he knows wot he's doing and didn't comment
Didn’t really “prove people wrong” its only one test and one example of a failure mode. The slow mo clearly shows the addition of the scaffolding helped contain the energy and keep the cage in place. Even then the scaffolding seriously moved. I don’t agree with the idea of proving people with a valid concern and good intentions “wrong” …..the cage isn’t mangled like a cartoon but would you stand next to it an repeat the test?
Calm down Jon
@@thelightofficial666 yeah sorry I forgot this is only a light hearted entertaining video about if the life saving safety device works. 😅
@@jons6125
seriously
Name the solution
The comments section on UA-cam
You do realise he has H&S consultants don't you think about it ffs
Also think about this anyone making these wild claims even ask what grade the steel was
Would love to see the test done again on a split rim that is either faulty or assembled incorrectly.
Split-Rim OR Split-Ring?
Split rims (the originals that halved into two parts) aren't really ever used any more, But, Split-Ring rims are and there are two types, the old narrow flange type (known to fail to seat/bed properly) and the new of them that uses a wide flange to lock onto the rim and provide more area for the tyre bead to seat on.
All that aside, having a tyre blow near you is bad enough that it'll require fresh underpants. Having one blow as you are leaning over it, the chances for injury or death are well above 70%, i think.
It's not pretty and that's a given. Wife has a family member that had a rim blow up in his face. nearly took half his head/face off. Scary stuff.
@@TheHungrySlug there are videos of split rims coming apart if you do a search. scary stuff. i will not run them on any vehicle i own & I'm glad the ones my dad had are gone.
yess this is the tire that takes everyone out seen one ring go through a wall was nuts
@@TheHungrySlug Automotive i can't comment on, but in plane wheels split rims are common.
I should perhaps add, in Australia and for most other places. But old stuff on farms and where ever else, I wouldn't doubt someone would keep using them.
I would actually be amazed if anyone is still using the original style of split-rims on a road registered vehicle.
But again, I've seen my fair share of videos of people and cars and bad practices.
Safe to say, this time, Daniel was indeed... Shook!!!
🤣😂🤣😂
Shook!!! We can remind him every time 😅😅😅
Man's serrrrrious
I have to say not only have you proved how strong your tyre cage is, but proved how strong todays tyres are also remoulds can be. Loved your reaction when it actually went pop though.
It's only the tread that is renewed, not the actual ply. Retreads come apart from centrifugal force, not inflation.
@@chippyjohn1correct. I do supply the best retreads tho 💁🏻♂️
Maybe try an old tire where you’ll actually get explosive belt separation… that would be interesting to see.
I personally think the controlled sidewall failure was a little too controlled.
Ya, looking for a rim failure. Tires blow up all the time.
Belt separation lol.
20 years back, one of my friends from automotive college was killed by a brand new car tyre. It let go when he was inflating it on the tyre machine, horizontal at waist level.
Something like this could have saved him.
Despite people being killed by this, manufacturers of tyre machines still don't provide safety cages. Daniel's going above and beyond here, top bloke.
Split rims are the issue. Not the tires. What are you boners even talking about
So nice to see your tyre guy getting recognition and being involved and also shown as being part of the Ashville team. These guys work wonders, often in horrible conditions and are so often overlooked! Well done `Tyre Guy` and well done All. Loved it, great video, thank you.
IIRC cages are also intended to contains things like rim failures where most of the steel goes flying one way or there other with a lot more energy than demoed here. That said, that's not as much of an issue on the types of rims being used here as it is with split rims that can do that as a result of being assembled incorrectly.
Specifically from Split RIM Desgine. There is no need to use a Tire cage for modern rim desgins. A cage is made for Split Rim wheels only really. Modern rims a very safe compresser relief come on Doesn't happen nope......Now your playing with fire mounting and airing up a old Split Rim you'd better use a cage then.
@@Mr.XJ.96 OTOH the amount of energy that could be released explosively from a modern rim fracturing is a lot. If you already *have* a cage, there's little reason _not_ to use it and a slight potential of a major up side to using it.
I retract all my critique😂
The one we use at my workplace has waaay thicker steel, that's why I was a bit wary of that thin steel👍
Glad you have people with the skill and experience to create something like that👌
You only have to ask what grade the steel is lol
The steel used is for holding concrete floors together it's heafty not tubular like the one you use sounds like
Are you sure yours isn't just using hollow beams?
have you ever handled old split rim for trucks?
You were tired of the thin steel?
I expect you meant "wary".
This guy's cage is much thicker steel than most of the cages I've used through the years.
Hi Daniel, appreciate your review of your tyre cage and it’s safety aspect however, tyre cages are/were used when wheel rims consisted on more than 1 part. These wheels are known as split rims, 2-piece rims or 3-piece rims. These were tubed tyres opposed to 1 piece rims being tubeless. Following the replacement of a tyre to a 2-piece, 3-piece or split rim a tyre fitter had to ensure the pieces were correctly aligned and the locking ring held in place whilst the wheel was being re-inflated. The cage was used to protect the tyre fitter in the event that the split rim came apart during inflation. In the event of the locking ring failing the air pressure in the tyre/tube would force the rings apart directing the locking ring straight at the tyre fitter. The steel construction of the cage would retain the ring therefore protecting the tyre fitter. I started fitting commercial tyres to rims in 1984 and have the experience to comment with the above. Great vids and keep up the great work.
Exactly!! i worked next door to a commercial tyre fitter that had a locking ring stuck halfway through a wooden roof joist , i asked about it and the guy said thats complacency!! we had done hundreds of locking rims, all done the same way and one day one just decided to let go......... guess someone got lucky their head wasn't between the wheel and the roof.
that's what i said they were originally designed for split rims
Came to say the exact same thing. Growing up in rural Australia I'm also very familiar with split ring tyres and the dangers of them. Cages were designed for multipart rims, not for exploding tyres. A popped tyres is scary and dangerous but nothing compared to a rim flying apart with 100psi or more behind it
Worked for Texaco trucking in late 80s-early 90s. Walked away from a few used tires airing up when we were busy. Loud bang, gust of cold air and the tire may move a couple feat. wouldn't want that air blast horizontal though. Those split rings on the other hand were no joke. That cage would just become shrapnel. Our cages were 2 inch, thick wall, box steal, welded 12 inches on center. We scraped 3 in the time I worked there because they were too deformed and one garage door because the new guy didn't use the cage.
Your right, tyre cages were originally designed for split rims. However it’s always best to use a cage for all types of commercial fitting when you have one available
There is nothing safer than you making your own stuff,as you spec it to a higher grade as it is your LIFE that is at risk. As an ex tyre technician i also made my own cage and due to the company buying cheap inferior tyres i sadly was greatful for the cage on various occasions. Goes to prove there is nothing wrong with making your own. Keep up the great work Daniel 👍
This is the best channel on UA-cam!!! Daniel has turned UA-cam into the altimate testing ground for everything Construction...Well done DAL and your amazing crew!!! No one, I mean no one is doing what you guys do on UA-cam...Both here in the U.S. and abroad...Stay Blessed and Safe Guys!!! Hugs & Blessings for the U.S. 💋💋💋
Hi
I used to work on trucks years ago and occasionally do tyre changes, that was when the rims were the split rim tube type things from yesteryear. I was told that you don't have to worry about the tyre bursting as the running pressure is far lower than the burst pressure and only to worry about the split rim parts not seating correctly so as the pressure builds the parts shuld seat and contain the circlip butt occasionally a circling may not seat correctly and the whole assembly would explode and so was the need for the tyre cage.
The "blowout" happened to the area forcing the tyre towards the wall by escaping air velocity, but the lower security chain still unhooked! If the blowout had occurred on the wall wide "maybe" the chain could unhook and the wheel escape the cage. Chain requires a security link (carabiner) to attain retention of the wheel. Entertaining as ever...and insightful!
Yea, hammer over and weld those hooks into a lashing eye, then get a couple of decent carabiners to securely attach them
Ashville BANGing out the content midweek 😂
That man was ‘Shook’ when it exploded!!😂
Now.. Put Tezza in the cage, and keep giving him jobs to do.. See how much pressure he can take
Upvote this comment 😂😂
Feed him beans n' haggis.
Absolutely loving the animations! They're top quality and make it a lot easier to understand
Yes, escaping air is pretty loud (priceless reaction there). In essence it's a blast wave contained in a container, an explosion without a bomb. Air can be tremendously deadly and air tank failures are a nightmare of many engineers. After all, you've seen yourself how far that camera was thrown. Pretty good test, would be fun to see a rim failure.
i think if the actual rim went during a pressure up the results would be alot more different, this was controlled compared to when a rim breaks in half or tyre debeads and rockets sideways
I was taught that tyre inflation cages were specifically designed for split-rim wheels. Too many farmers were ... erm ... 'buying the farm' when inflating split-rim tractor tyres.
What I was going to say! You beat me to it! 👍
No doubt someone may have already commented these cages were primarily designed for inflating split rim wheels, although a conventional rim tyre explosion is highly dangerous a split rim failure is far more dangerous as the rim and locking ring would bend the cage out of shape, without a cage the flying components would be released with such extreme energy anything in its path would be fatal, so I would like to see the results of your cage with a split rim wheel, how you would make it fail is another question
Lovely update, I'm guessing we'll see that explosion reaction a lot more often in your videos
Your great at explaining things and credit to you and your team for editing
Workshop compressor where I worked,the compressor was set at 110 psi maximum,that was all we ever inflated our tyres to when new ,repaired or retreads were inflated to 100 psi. Never trust a tyre ,even when inflating tyres with with low pressure on the vehicle, connect and stand 6ft back then inflate, especially on a tipper truck.
2:58 shoutout to the editing team… good job lads
Brilliant Daniel reaction was hilarious
Cages were a actully made for split rim bus/truck tyres, not modern day single pice rims, to stop the rim killing some one if it wasn’t installed correctly
They're now used for both, originally there were only split rims, it's still just as important to use them for one piece wheels as, the whole rim/tyre assembly can easily kill or injure you in the event of a tyre explosion
Na Daniel you mugged us off! You welded more bars on that cage and you tied it down to the scaffolding. Use the original Tyre cage without it being tied down .
Brilliant video, not only showing how strong modern tires are but also the modern engineering behind the rims, thank god the old split rims are gone, it used to be the rim would split and explode before the tire would.
Once one tyre did go on our trailer while I was hauling wheat. The tyre had 9 bar in them and I almost made a second sunroof to our tractor when it exploded. It was fun changing it on a busy road and obviously, it was the one that faced towards the traffic.
Bound to bound bound for the remould 💪🏻💪🏻💪🏻 interesting video - running out of compressor before you run out of sidewall and good to durability test the remoulds as well
I'm gonna say itt 🎶 S**t it blew up ... can everyone stop pressuring tyres 🎶🎶
Who needs the Discovery Channel when you’ve got content like this !
Cage stood up but DANIEL WAS SHOOK BUT FISRT TIME FOR EVERYTHING 👏👏👏👏 well done Asheville love your content 👏👏👏👏
Should've invited some uni student to participate... man got "shook"😂
In my 20 years in the commercial tyre industry. I had 5 truck tyre's explode on me, luckily I could hear them zipped first, and move just out of the blasting. 😮😮😮😮.
Man was shook when it bang!
I have a feeling well be seeing that clip on loads more vids. Shook.
I love the commitment to shut people up 😂
Top video Daniel. Great to see you being such a conscientious employer👍
I knew a guy who built his own tire cage out of soft steel. He said "I only died once!" after a truck tire he was filling blew.
Tire manufacture haa improved a lot over the decades.
Is it worth putting a chain through the middle to stop it swelling out or the tyre rolling ?
Tyre shook production 😂 well done Daniel
I have a suggestion to make the cage even more safe, using some sort of carabiner to close the chains so even if some sort of totally freaky (and not plausible) accident happens, the chains could not jump out like in the video. I'm in the construction industry and I really love the approach of the Ashville team regarding safety.
Glad to see only the tyre is going for scrap ,well done !!
Been waiting for this 😂😂
Can’t wait see all the videos now off the face Daniel pulls when the tyre w pliers 😅
I worked for a company building Aircraft Tugs. We had one explode a tyre at Heathrow, and it brought out the Bomb Squad. It blew 10 mil. plate off the wheel arches. and created a lock down.
Love that Daniel smashes out a video to show the quality of the teams work. because people questioned the quality of guys workmanship hahahaha
We should talk more rubbish to get more videos out of him 😂 Great video!
This made my day, great vid 🔥
The tire KING seems like a 10/10 guy!
Lad I used to work with pumped up his low profile tyres on his beamer one day, Didn't realise you have to release the gauge to get the reading, He genuinely thought it wasn't pumping up. He got that bad boy up to 9 bar (130psi) whilst kneeling next to the thing...
He was a very lucky guy that day. haha
Seriously, middle of the week.nice one 😂
Glad to see it working so well! The chain whip when the tyre explodes could be lethal though! Watching it in slow mo made it look worse 😂
I really hope that the cylinder of the compressor was rated to the pressure that is was supplying. Winding up the pressure cutout doesn't increase the pressure that the tank can withstand.
Can't start to tell you how glad I was to see this upload. Well done 😁
Makes a TONNE of sense. Since these tires are make to withstand 20+tonnes of load (in a grouping of 8+) they must be blowout proof for drivers of large coorps.
Big up the tyre dude he’s a lad 😂
He's a Rock.
Dan got shook,I'm serious 😂😂😂😂
As you know Daniel. There are a lot of armchair experts on UA-cam. I absolutely believe that you and your guys will not put your trust in anything but the best. Glad you proved all the doubters wrong 😂😂
Should call your tyre fitter Thor he’s an animal the way he mounted that tyre like a bicycle tyre. Legend
Had a trailer tire explode during a road service call yesterday. Driver didn't know when it went flat. From what I could tell, the auto inflation airline wasn't* fully screwed on, allowing air to leak.
I only had a 2ton ratchet strap attached to the rim. I estimate, based on time without valve core for my service truck, to be at around 70psi when it blew. Upon inspection afterward, the liner on the inside had a thin ripple on both sides where the tread met the sidewall. Glad I had that strap on it.
Proper job and now we all no it’s probably better the the actual ones but only one thing I did see tho is I Think you should put the chains on carabiners tho to stop them
Flying off just in case it gos the way the your tire guy is standing
When I was a young lad, I worked in a tyre shop. Once I had a wheelbarrow tyre explode in front of me. It wasnt secured in any way and wasn't attached to the wheelbarrow. I was sitting in front of it, not on the side of it. One of the people who worked there told me to put in X amount of bars. He thought I understood it was a joke, I didnt. Tyre exploded and I fell backwards on myself. I didnt hear anything. There was just a lot of dust and I got confused as to what had happened. Manager came running out worried about what had happened. I think the jokester got a firm talking to.
🎉❤❤❤ always following...have learnt a lot from you Daniel, 🇿🇲 Zambia ❤
I've been told from by the old generations of truckers when truck tyres used to have inner tubes that those could be very dangerous if for some reason the inner tube tore apart facing the rim. All the force from the air rapidly pushed on the rim like a very powerful punch and the result were pieces of the rim flying off like shrapnels.
That was a self created bleb with a relatively slow release of pressure !!! you get a ran flat tyre going with what they call in the tyre game a smiley face blowout / failure, not only would the explosion burst your ear drums that self made cage will land you in front of the man in the wig, imagine trying to explain to him.
Bye the way, why waste 3 tyres a camera and possibly a life, surly it’s cheaper to buy a tried and tested cage 🤷♂️🤦♂️💥
coming soon: Ashville Heavy Duty Tire Cages AHDTC, Certified!
Having worked in a tire shop. I approve of this video. That and our cage was probably 5X sketchier than yours.
The way that tire technician moves around and how hard he works, all I can think is that he has a full English breakfast every morning.
Maybe try that again on tired NOT rated for 120 PSI. Maybe a normal street tire rated around 40 PSI would be easier to pop without damaging the tire first.
Daniel came un all guns blazing on this one!
After reaching your compressors limit you could of used a co2 bottle when full they are well over 800psi
I think many people still base worry on the old split rims,which where very dangerous under pressure and could do a lot of harm if exploded….
9:12 Daniel was SHOOK 😂🤣
Sorry Daniel but i think your wrong to double down….all you proved is this could and imho should be be safer. Heavier, bolted down, no loose chains and with a a solid screen between the tire and operator would all make it better?
1:50 that’s funny, my name is Donovan as well 😂😂
Daniel was SHOOK!!!!
Great video, you’ve shown 4 things, firstly the tyres you use on your lorry’s are top quality, secondly if you are using remoulds they to are top quality, thirdly your tyre fitter knows how to repair a tyre properly as it took way more air than it should have been able to before finally exploding and finally you trust your staff. Your welder has over 30years experience, if he has built a bespoke item you know that it is safe and will protect your employee which as the owner is your No 1 priority. What would be really good to see (however not cost efficient with loss of tyres and buying an off the shelf product) is how that would stand up to the same test. My bet is there would be a lot more damage to the off the shelf product with potential catastrophic results should your tyre fitter have been in there at the same time. No one can say you don’t take health and safety of your employees seriously, these videos both the court video and this one just prove that regardless of profit your employees come first. 👍🇬🇧
Comment field expert here! I think failing rims would posses a greater risk than failing tyres. A friends dad had a rusty tractor rim fail, his cowrker died (rim in head) and he ended up in a shorter coma. I'm not sure if the rim hit him too, or if it was from the preassure wave. Ha had broken ribs and collar bones, so I guess it hit him too.
The man was shook!!
I remember a tires shop down the street from my house in Los Angeles. One of their workers was airing up a truck tire with a locking ring, when the whole thing exploded. The blast sent the lock ring, and the employees head through the roof, and across the street 100 feet away. Pretty grisly.
Rim ejection is the reason we used cages for the most part, they do help contain the tire a bit if you somehow managed to make one explode, but I don't think that is the main reason for them.
Ibr I started watching this drinking a few red ones and when. Man started breaking ur down I just said man like Daniel from Asheville 😂🤣😂🤣 and laughed love it energy
Your best bench press,oops no gym lol😂 👍💯
Sounds like you need to Start Manufacturing Tire Cages!!
The cage is not to protect against tyre explosions. They are used when inflating tyres on two or three part wheels. If not fitted correctly, the locking ring can fly off and take you out. It happened years ago where it took off a tyre fitter's head while leaning over a truck wheel. My father's Firestone store was sent a cage after the story hit the news. Tyre shops all got serious about safety after it happened.
Mans got shook 😂🔥
Now, Daniel, a point, rims fail and tyres fail usually due to faults; either manufacturing or usage fractures.
ALMOST No tyre [truck tyres] blow from excess pressure ~ your average industrial compressor is set to blow safety value @ 150 PSI ~ though it's over 27 years since I was there so !
i approve this tyre safety infomercial.✅✅
😂 0:21 Okay … glad your experimenting with these new type of content
10:05 but his underwear would 100% need changing lol 😂
Primary safety concern isn’t when the tire fails, rather it’s when the wheel fails first. It’s that chunk of shrapnel (or split rim) that becomes a projectile.
WhistelinDaniel durability test & he is not fuming.👌🏽
Interesting. Did it pop at the patch area or somewhere else? Definitely try with the split ring rims. I thought it blew in the sidewall and not from the re-tread area.
Brilliant glad to know da tyre fitter will be safe👍
Tire cages are for tires that dismount them selves from the wheel when seating the bead not spot blowouts.
That's a lot of work for internet trolls/keyboard warriors. I wouldn't have bothered, but I will gladly watch any mid-week Ashville. Tire cages are over rated for any new tire. As you have just proven. Keep it under 90, you're good.
Niiiice, maybe a carabiner clip on the chain to prevent flailing