Visonic Powermaster-30: How to Enroll a device by Serial ID

Enrolling a device by its serial ID on the Visonic Powermaster-30 Wireless Intrusion Alarm System. It can be quite confusing and frustrating if you do not fully understand the mechanics behind it.
Feel free to leave questions or video requests on the comments page. Will reply ASAP.

[@axelbruce1926]

Can DSC door contacts and motion sensors work with this System?

[@tejaspatel8979]

Hi
When you go into device setting at that time you find "Event Counter" Here you determine whether an alarm will be activated upon continued motion (low sensitivity) or upon a single alarm event (high sensitivity)..
can you please explain me what is this means for. I have this for NEXT K9-85 PG2 Wireless, PIR /Pet Tolerant Motion Detector sensor.
Also, I want to know can I adjust to more sensitive beacuse I do not have a pet now and hence, I don't need as said below in manual:-
The Next K9-85 PG2 detector is tolerant to 38 kg (85 lb) animals moving on the floor or climbing on
furniture as long as the activity takes place below 1 m (3 ft). Above the 1 m (3 ft) height limit, the detector is tolerant to 19 kg (42 lb) pets, but the pet immunity will decrease as the pet gets closer to the detector. It is therefore recommended to select a mounting location that minimizes potential close proximity of animals.

[@ei-pi]

Hello
I am enrolled key fob but show message pre-registered does not have the code

[@powermaster-30how-tovideos34]

hi, maybe you can check out my other video showing how to enroll by using enroll button instead
ua-cam.com/video/0JK1njsl5yU/v-deo.html
Make sure to delete the keyfob so that you can start from scratch
for keyfob, iirc, the enroll button is actually the Star(*) button

[@ei-pi]

@Powermaster-30 How-to Videos thanks

[@amejoudyassine1809]

how to configure the partition in visonic powermax complete