Thanks for watching. Different tasks have different procedures but generally the cleaning solution is added directly to the floor. You can learn more in these videos: ua-cam.com/video/NWZK5wd60SQ/v-deo.html ua-cam.com/video/aXYxVHxSNdc/v-deo.html
@@AmreSupply I stored my machine with the brush still on with my machine standing up and now when I start it. It just jumps around like crazy and I can't control it is something warped? Because it want stay on the floor. What I need to do. Order a new brush I only used it once it's brand new. Please help me sir
@@Flaboy386 Thanks for watching. It is possible that something is warped. You could always use a straight edge or ruler to lay against the pad or the mounting surface to see if there are any significant high or low spots. Do you have any other brushes that you could compare against? Considering that you'll eventually have to buy a new replacement pad, you could get another one and compare it on the machine. If nothing changes then the issue is not with the pad. In some models you might be able to replace the mounting surface of the pad if it is warped.
@@AmreSupply thanks sir. I hung up the brush and it straightened out on its on and I was able to use it but it's still jumping a little I think the pad might be warped so I am going to order a new pad brush. Thanks a lot for your feed back and I will let you know how things work out sir Thanks.
Thanks for watching. Floor machines can be used for spray buffing which you can learn more about here: ua-cam.com/video/NWZK5wd60SQ/v-deo.html You might also find this playlist helpful especially some of the videos on the principles of cleaning which goes into the science of it all. ua-cam.com/play/PLCo9SMjkdWBzREndiZ9xSNqOZLJJRRK9n.html
This video is so so effective. Been looking for a video of such impact, couldn't find it until this. 🙏💖🙏
You're welcome Laisa, we're just happy to help!
Very clean presentation
Thank you!
Do you have to put any cleaning solution in the machine?
Thanks for watching. Different tasks have different procedures but generally the cleaning solution is added directly to the floor.
You can learn more in these videos:
ua-cam.com/video/NWZK5wd60SQ/v-deo.html
ua-cam.com/video/aXYxVHxSNdc/v-deo.html
these single-rotor floor scrubbers always kicked my a**. i never knew how to make them go left or right😆. I always used dual rotor if i could help it😅
Thanks for watching! These single disc floor machines do take some practice to get right, but its always use subtle movements it doesn't take much!
@@AmreSupply I stored my machine with the brush still on with my machine standing up and now when I start it. It just jumps around like crazy and I can't control it is something warped? Because it want stay on the floor. What I need to do. Order a new brush I only used it once it's brand new. Please help me sir
@@AmreSupply it uncontrollable. Did the weight warp the brush deck or something??? I am confused
@@Flaboy386 Thanks for watching. It is possible that something is warped. You could always use a straight edge or ruler to lay against the pad or the mounting surface to see if there are any significant high or low spots. Do you have any other brushes that you could compare against? Considering that you'll eventually have to buy a new replacement pad, you could get another one and compare it on the machine. If nothing changes then the issue is not with the pad. In some models you might be able to replace the mounting surface of the pad if it is warped.
@@AmreSupply thanks sir. I hung up the brush and it straightened out on its on and I was able to use it but it's still jumping a little I think the pad might be warped so I am going to order a new pad brush. Thanks a lot for your feed back and I will let you know how things work out sir Thanks.
How do you clean the brush after stripping floor.
Thanks for watching. Using a hose rinse the pad by spraying the whole surface area. This will remove residue and any soil before it can fully dry.
Can I know the model of this machine.. Can It be found in Malaysia
The machine used in the video is very similar to the Betco E8301407. You should be able to find the same style of floor machine in Malaysia.
What are some veteran moves to always keep in mind? As a first year custodian askinh
Thanks for watching. Floor machines can be used for spray buffing which you can learn more about here: ua-cam.com/video/NWZK5wd60SQ/v-deo.html You might also find this playlist helpful especially some of the videos on the principles of cleaning which goes into the science of it all. ua-cam.com/play/PLCo9SMjkdWBzREndiZ9xSNqOZLJJRRK9n.html
Make sure to unplug he machine before tipping it back
Thanks for watching. The machine won't run unless the safety is pressed but for additional safety you can definitely unplug the machine.