5 DIFFERENT CABLE CONNECTION METHODS
Вставка
- Опубліковано 7 тра 2020
- 5 Joint of Electric Wire
SUBSCRIBE-goo.gl/gYkBdJ
Other video!!!
Popular videos-goo.gl/KZCCXW
Awesome life hack -goo.gl/SCZiAr
3 Drill Machine Life Hacks You Should Know-goo.gl/7Ckdfh
How to make -goo.gl/g2Ph4P
Welcome to MR SUNY channel
Our channel include of guiding videos:
- Life hack
-DIY
-How to make
-Awesome ideas
-Tips
You are interested in handiwork, craft or you just have nothing to do, haven't you? You have found the channel you really need. Here you can find lots of crafts, hand made items, and the main thing is that they all made of make-shifts and at the lowest cost! - Наука та технологія
I am an electrical engineer, and I disapprove of many of these methods, including warning of the risk that this can generate. This video is a disservice to a population.
True
Especially if it's carrying a voltage and load...
Firefighter here who dabbles in DIY electrical work and all I could think about while watching this was every one of those techniques is a fire waiting to happen. None of those are secure and will eventually create resistance heating when under load...
yes. I agree.this is only part of the job. these compounds must be protected from oxygen.
i'm able to accept thoose methods but only with soldering after twisting wires. I'm also electrical engineer.
I have over 20 years in the electrical trade and not one of these methods would be approved by an electrical inspector. Maybe you could call it an art project... it's very creative!
What about 2:08?
@@fupidox5642 The same.
Electrically these methods are acceptable, but practically are not efficient and time consuming when doing the whole house wiring.
NO in Europe...!!
So how do they do it? Or simply replace a whole new thing with a connector?
The one at 2:10 is known as the western union or lineman splice and has been the standard for attaching two cables for NASA since the latter part of the 90's. So long as you solder the entire piece, it has been proven to be stronger than the rest of the cable in tension, but still provide good/low resistance electrical contact.
Ок. This is very beautiful, just don't forget to solder this beauty after.
Muy buenos gracias bien explicado saludos villa Tabasco México
Wow! Nice work ,ur work have differents.good job
Thanks for information about the different types of joints
thank you for the knowledge sir
Awesome tips
Хорошие способы соединения. А ещё пропаять👍. Good connection methods. And also solder👍. P.S. Perhaps I'll take it on board. Sorry for my english, google translator is to blame.
Thank you for extremely good easy to use wiring instructions.
I'm gonna try this at home
it was great. good luck
❤❤❤❤ I LOVE YOU. أحبك
Eu usaria uma luva de cobre estanhado é crimpava as duas extremidades para prender os cabos. É rápido, fácil e barato. Na obra, tempo é dinheiro.
Very goooooood suny
Thank you guys 🤗🤗🤗
good channel!
*Buenos consejos.* 👍
What was the point of tugging on the continuous blue wire in the second splice?
Sería interesante que muestres la forma de aplicar el aislante en cada tipo de unión 👍
Thank you for this video very nice..💛👇👇👇👇👇👇👍👏
It is a good and well done job. We in Iraq do not use such work except for a few technicians who have experience, and I do such work when I go to work when I and the owner of the house agree on such a job and the right price
Parabéns muito legal.obrigado
Very good idea
Nice work
Buen video felicidades
very best idea sir
Saludos Maestro, desde Apodaca, N.L. México, gracias por todo lo que nos comparte.
Why does this video have so many likes when these practices are dangerous and can introduce an electrical fire?
Awesome⭐️
Just twist the two wires firmly and insulate them 😂
Don't waste time by doing this
Right😂😂
@@angrygamer3245 Hmm.... By the way pls check my channel
Good suggestions, although maybe it's too much of uncovered wires. If you have proper insulation ok, but when using only insulation tape I would prefer the usual method.
Exelente....!!!!
ball show lengthy but super perfect work
increíble amigo es un crack lo que hace.... estuviera bueno que hablara también, no?
As an electrician my blood boils watching this stupidity
Video super irukku bro
Глаза!!!!
Ни как не ожидал увидеть тут столь часта используемую фразу моего больного воображения🤣
не так,как говорит, воображаемый доктор, в моей голове,: ГЛАЗАААА
Самое интересное, саня оценил)
Сварщики в теме )))
Доктор ти где
Luv your videos 😗
“SUNYFICATION YOUR WORLD“ 👍🏻
Wow круто👍👍👍👍
К таким видео нужно прикладывать, помимо всего прочего, результаты измерения переходного сопротивления
amazing ..
Very good
He is an expert in combing his daughters hair
Amazing work Done as always 👌
Thumbs up 👍
👏 👏
Oye no genera cambios cuando haces mas grueso el ensamble eres bueno amigo
This is a great idea for running new wires with the old ones through EMT or tight space. Besides that, the wires are stripped back too far and exposed. Not really professional when you have to insulate the expose part with electrical tape. Just save your time and use wire nuts or wago connectors, more safer as well.
As fully qualified plumber, I see nothing wrong here at all.
As an unqualified plumber, I agree
because you are plumber, not electrician.
@@ElectricianW learn sarcasm
Perfectly adequate for low DC voltage ONLY. Most of these are dangerous as hell for higher voltage DC and absolutely unacceptable for AC of any voltage.
You have shown us the way of firm joining of wires, which is a very good video for day today's wiring. I liked this video.
very nice ideas as usual sir
Thank you my frend 👍👍👍
@@mrsunyofficial welcome sir
Another video that proves I’ll watch anything on utube.
Actually a very useful video Explaining
An excellent video how NOT to do connections. Believe me this is wrong! Copper is oxidizing!
what you do at the time of running current will you do this method at that time
Está chido el proceso
Видеоурок по технике вязания макраме☝️
Так там все четко же. Пропаять и вообще красота будет
Видио о том "как спалить квартиру" или опять "с паяльником посорились".
Евгений Николенко После видео с доктором дью я уже боюсь повторять что-либо отсюда
У многих странах скрутка розрешена. Я делаю так же но м пайкой...
@@StarFightingStory метод пайки приемлем при полной обпайке скрутченых проводов и правильно подобраной температурой нагрева олова. В иных случаях даже зажимы ВАГО будут надёжней на многожилках.
Muy lindo el macramé con cables...
I feel that solder makes these redundant. And if you feel like, clamp pressure to make the connection a solid copper wire (cold welding). Which is what crimping does when done correctly
Спасибо, за информацию, полезно, лайк поставил.
Чем данная информация полезна?
@@user-ff8yl5dn8b Всё в жизни знать невозможно, мне некоторые моменты пригодились, вот и вся физика.
@@user-sn5oi4sh6g просто скрутки запрещены. Разрешены: пайка, опрессовка гильзами и соединения спец зажимами.
Скрутки ушли в прошлое. Пожарные с ними сильно борются.
@@user-ff8yl5dn8b Согласен, гос .нормы, всегда меняются, но в боевых условиях, срастить провод, мне пригодилось.
Muy bueno y efectivo el método para Unir, Ensamblar o empalmar los cables en red domiciliaria. SOLO QUE NO COINCIDEN LOS COLORES. DADO QUE EL ROJO SIGNIFICA POSITIVO,RED O FASE Y EL CELESTE ES EL NEUTRO Y NO PUEDEN EMPALMARSE CABLES DE POLARIDAD OPUESTA O CONTRARIA.Saludos desde Formosa Argentina
Excelente
Video title should be "What Barber does in lockdown!"
2:10 I use this method lol xD
This is the first step of a NASA splice. Like all other methods shown, it still needs to be soldered, leaving no bare copper exposed, and then covered in heat-shrink insulative coating.
Excelente método de emenda
I really enjoyed👍
👍👍👍
Доктор одобряет) если такими методами соединять кабеля я ничего не заработаю
I am electrician for more than 40 years.Those connections are made better than with wire nuts.Soldering would make them even better.Not by the NEC Code tough.
This is how you burn down your house
Can you imagine going to someones house and seeing this done? I wouldnt know if I'd bust out laughing or say every swear known.
Actually, these techniques are technically correct. For full completion of the joints, they could be soldered, but they need to be insulated without question before being energized.
This is actually correct way
You won't be pulling 400A through them
NEC doesn’t approve these techniques and if ur doing hundreds of these connection a day the Forman would cus u off the job site
Gregory Kusiak and black turbine shut up
Perfect timing 😜😜😜
Very nace👍👍👍👍
Muito bom eu gostei
Brilliant no words♥️👌
👍👍🤗🤗
Awesome friend
I want download this music beacause it increases my confidence.plz name this music
I love your nails.
I too love you
nice
Nice. Now i can wire up my new house and save alot of money.
👏👏👏👏👏👏👏👏
👏👏💕💕
Does any electrical code, anywhere approve basket weaving as a way to join conductors?
Good job 👍 congratulations 🎊
Дядя Саня, если у тебя провода вместо верёвки, можно просто на узел связать
2,3 и 5 скрутка хорошая, а 1и 4 скрутка они между собой похожи, но они растяжение не выдержат
Cool methods :)
I'm staying connected
Exlent
Love ur chanel. Where do u live bro. I am frm india🇮🇳🇮🇳
Hallo india 🤗🤗🤗
Господа!!!! Не мешайте человеку,он же старался))))
How do you insulate that joints?
First like and comment are from me
No están mal tus amarres pero considero q si no aprietas con pinzas tarde o temprano se dará calentamiento en esa conexión y por lo mismo se dará un falso.
Ahora q si esos amarres al final los hubieras estañado entonces si que quedarían perfectos.
8 ways to see pretty blue lights before the fire starts. Please no one do this. Always consult a licensed electrician.
doing coils around like that is a definite no no. it will go BOOM
Good muy goosd
Cool cool cool cool cool
Parabéns
Gostei do vídeo
Question: have you ever heard of soldering? It’s literally welding but for wires
Просто ахуительно !!! А тянуть зачем? Это не веревка... А последний способ ваще зачетный )))