wow i just now found this video, i am in the process of stripping a 300+ yr old pressed backed oak chair, that was my dads grandparents porch chair...it also has a cane seat... but broken beyound repair. so i ended up removing all the cane but saved the cane and binder pieces for refferences , thank you for this video..
Can I start the caning and finish one direction on the whole seat and then leave it and come back another day or has it all got to be done at the same time ?
What a coincidence, I just ordered some strand cane today to start learning, this video will be very helpful. I hope to not bother but I sent you a message on Fb to ask some questions ( I didn't know how to do it on youtube.) Hope you see it. Thank you
Thanks! I see that you answer questions so I here's a good one: The frame of the rocker seat I am doing is not flat. The sides are curved from front to back with the lowest point being almost an inch below my first step of back to front cane. Do I need to remove this first step and start over and leave some slack to accommodate the dip in the seat frame sides? Thank you, sir! Great video!!
Thank you for the great tutorial! Would you have any tips for repairing a hole in a cane back sofa that is over 100 years old? I am hoping I can just add cane to what is already there. Have you ever done anything like that or know if it is possible? I am not sure how I would tie off the cane that I add.
you can just add the cane to replace the broken ones, the splice will have to be in a spot that is not seen --- such as the underside or in the hole where the cane comes out.
Hello! Congratulation for your work and amazing video. I followed your video to wave my own chair but I had a problem because some strip were broken while waving. Where I live is such a hot an dry area that less than a minute after take the strips out the water they gget broken. Would you mind give me some tips to fix this situation? Thanks.
Did you soak the binder cane in water like you soaked the other strands? I need to bend the binder cane around a curved corner and concerned about the cane cracking and wondering what you did with your chair in the video.
Can I start the caning and finish one direction on the whole seat and then leave it and come back another day or has it all got to be done at the same time ?
Thanks for explaining the details-this is the first video that shows how to make the knots...and I searched for hours!
I stumbled upon this today and a flood of memories came rushing back from spending hours watching my grandpa do this so thank you for sharing ❤
Glad you enjoyed it
"You learn something new everyday". Thank you so much for making this video tutorial!!! Very thorough! :)
wow i just now found this video, i am in the process of stripping a 300+ yr old pressed backed oak chair, that was my dads grandparents porch chair...it also has a cane seat... but broken beyound repair. so i ended up removing all the cane but saved the cane and binder pieces for refferences , thank you for this video..
Thank you so much! I have 2 chair seats to repair and I could only find cane webbing videos! You saved me money too!
Glad I could help!
Beautifull work, thanks for teaching. I love organic materials and furniture, are the best...thanks again
Very nice. Thanks
Thank you for this easy to follow video! I have a few chairs to work on in the coming months and I we be rewatching this again. Cheers!
Glad it was helpful!
Thanks for sharing! Very thorough and clearly explained.
Thank you. I have a small antique rocking chair that I am refurbishing and I'm going to give this a try.
Go for it!
Thank you
Sir iam from india.i see many video put no good. Your video. Very good sir thank you sir🌹🌹🌹iam share my daughter allso thank you sir.
Thanks and welcome
Mesmerizing tutorial. Thank you for sharing your expertise.
Thanks for watching!
That was a most informative upload. Thank you sir!
Glad it was helpful!
Thank you for this excellent tutorial, just what a beginner needs to understand. Best wishes from Scotland
Can I start the caning and finish one direction on the whole seat and then leave it and come back another day or has it all got to be done at the same time ?
Thanks! This was really helpful.
Glad to hear it!
Thank you today I’ learn new thing
Very helpful .Thank you!!
You're welcome!
What a coincidence, I just ordered some strand cane today to start learning, this video will be very helpful. I hope to not bother but I sent you a message on Fb to ask some questions ( I didn't know how to do it on youtube.) Hope you see it. Thank you
Thank you for that... There was ne today thinking... Ill reweave my chair.. Ha ha haaaa... Underestimated the job, worth it but damn, thats a lot haha
Excellent
So helpful because of your thoroughness, cant wait to get started! Do you have a video for a round?
Coming soon!
Thanks! I see that you answer questions so I here's a good one:
The frame of the rocker seat I am doing is not flat. The sides are curved from front to back with the lowest point being almost an inch below my first step of back to front cane.
Do I need to remove this first step and start over and leave some slack to accommodate the dip in the seat frame sides?
Thank you, sir! Great video!!
run the vertical cane first, which should form the curve, then the horizontal should conform to that!
Thank you very much!
You're welcome!
Excellent 👌
Thanks for watching
❤
arduous process but it looks very good .
As I am getting ready to tie the knots on the bottom of the chair how do I rewet the Cain?
wrap it with a wet cloth and let it soak that way,
Thank you for the great tutorial! Would you have any tips for repairing a hole in a cane back sofa that is over 100 years old? I am hoping I can just add cane to what is already there. Have you ever done anything like that or know if it is possible? I am not sure how I would tie off the cane that I add.
you can just add the cane to replace the broken ones, the splice will have to be in a spot that is not seen --- such as the underside or in the hole where the cane comes out.
Good
Thanks
Hello! Congratulation for your work and amazing video. I followed your video to wave my own chair but I had a problem because some strip were broken while waving. Where I live is such a hot an dry area that less than a minute after take the strips out the water they gget broken. Would you mind give me some tips to fix this situation? Thanks.
I keep a wet towel and lay that on the cane
@@donaldporta Thanks, I´ll do it.
Yes mi arte
Where do you buy the caning and the wooden plugs?
there is a link with the description of the video
Did you soak the binder cane in water like you soaked the other strands? I need to bend the binder cane around a curved corner and concerned about the cane cracking and wondering what you did with your chair in the video.
Yes I soaked the binder cane.
The cane looks like it's not an even color. Is it a bad batch of cane?
Am! My artesia
p.
Todo iba bien hasta que le colocó esa Pintura.
Cúanto es la medida que se utiliza el "cane"?
Can I start the caning and finish one direction on the whole seat and then leave it and come back another day or has it all got to be done at the same time ?