From one fabricator to another, GREAT job. The adjustable caster set up is very heavy duty. And what makes it full of common sense is that you built the top in manageable pieces. 2 THUMBS UP 👍👍😎.
Just got myself a mig welder and want to build a welding table as my first project. Your table design is so simple and practical I can't wait to start. Thank you! Hope your head is OK. :))
Slick as hell! When I saw the first set of nuts I had no idea they were that big! (no comments!) I built my table out of steel racking like you see at Home Depot. I just got it to a height I liked and welded all the contact points. I figured if the hold tens of thousands of lbs. I'd give it a shot! My next project will be a trolley hoist.
Nice simple and clean build. I tried the bolts for leveling on a bench I did - used bolt sizes too small for the weight of the bench and found them to be binding. Cheers
That was a very nice build. Its about time I made another welding table for my everlast equipment. Got myself a powerplasma cutter so I need a downdraft cutting area.
I first saw this video a year ago and was recently talking about how I saw a guy build a beautiful welding table, so I had to see it again. Still impressive!
Phil hi. I am an amateur welder and I like to do small weekend welding projects. I do not have a welding table and am interested in making one. The thing is, I don't have room in my garage for a table like this. BUT researching UA-cam for a collapsible welding table, info is scarce. I think it would be very interesting if you uploaded a video making a foldable one, even the same size as this, but one that can be folded and placed against a wall. I'm sure there are many people in the same position with me. Thanks!
nice table I have built a few the same way only thing I would do different is let the plate hang over the tubing a bit so clamping is made easier sometimes the tubing makes the clamps slip
@kalei p. That is an interesting thought. I am about to build a welding table in the next two weeks. I have designed one that has the same dimensions for the table top as Phil's here, (1800mm x 700mm) but I am going to have 100mm of plate hang over the tubing all around. My thoughts are so that I can use clamps, which you mentioned also. I am planning on using 6mm mild steel plate for the top. Do you think 100mm stick out would be okay or do you think it might be too much. I have seen a lot of builds but I haven't seen any with an overhang like I am planning.
Not much cleaning up afterwards when looking at mig-welding. I don't weld much and don't mind cleaning up the welds. But this is more my pace with tig-welding. I'm not sure to change machine, but i like the outcome of the tig-welds.
Like how it’s adjustable AND has castors. I am going to do that on mine. Great idea. Great table build If I do a video I will link to yours on the castor idea and give credit. Of course New subscriber here. Can’t wait to go watch all your old vids
Just my hitghth I'm in a wheelchair and like how it's adjustable great video ima try and make one I have most of the tools just not a tig welder a mug with fix wire but I do have a metal chop saw
Wolfman Jack thank you for replying, I have a welder I've been a welder for 20 years, I was just looking for the lazy way out, I can use some of hi ideas I did draw out my own work table on paper with the measurements and all. I do have metal foundries that that sell metal. Thanks again Wolfman Jack for replying I do appreciate that I learn off comments to on UA-cam comments teach to.
Good afternoon, Phil. From now on I must tell you that the table is excellent ... I need to know if, in any place you have detailed the measurements of the table and the materials that you used ?. From now I thank you the information. Greetings from Argentina, Angel
Hey thanks. As far as I remember the steel plates were 60x70cm each and 8mm thick. So that makes for a total width of 180cm, the base has the same size obviously. The square tubing is 45x45x2mm construction steel and the threaded rods and nuts are M36. I made it so that the height is adjustable from about 80cm to 120cm, right now the table is at 100cm working height just like my large workbench. The wheels are 150mm in diameter if I remember correctly and all of them can be locked in position.
Muito bem feito e lindo, parabéns! Além de um excelente profissional, você é um bom operador de câmera; tudo bem documentado. Eu vivo em Brasília, no Brasil, e de todos os videos que eu vi o seu é o melhor, eu vou copiar, fazer uma igualdade. Deus te abençoe. Sucesso. Very well done and beautiful, congratulations! Besides an excellent professional you are a good cameraman; all very well documented. I live in Brasília, Brazil, and of all the videos I've seen yours is the best, I'll copy, make an equal. God bless you. Success. André Boaventura
From one fabricator to another, GREAT job. The adjustable caster set up is very heavy duty. And what makes it full of common sense is that you built the top in manageable pieces. 2 THUMBS UP 👍👍😎.
I LOVE THE STICKER ON THE BANDSAW.
Very nice table. Great video, no talking, no stupid head banging/heavy metal guitar music. Instructive, simple and to the point.
Just got myself a mig welder and want to build a welding table as my first project. Your table design is so simple and practical I can't wait to start. Thank you! Hope your head is OK. :))
I like that no talk but captions. Just work don't need hear no talking. Very nice table.
Slick as hell! When I saw the first set of nuts I had no idea they were that big! (no comments!) I built my table out of steel racking like you see at Home Depot. I just got it to a height I liked and welded all the contact points. I figured if the hold tens of thousands of lbs. I'd give it a shot! My next project will be a trolley hoist.
Love how you got a Woody Guthrie sticker on your machine
Ha, You're one of the few people who understood that reference!
Thanks for the plans and showing how it's is done. I need to make one so I can start doing some small Fab projects.
My compliments! TIG welding with rod is a nightmare! My complete failure to school. You have great results, you seems to know what you are doing.
Thanks! It depends a lot on the machine and settings, with the newer ones it's a bit easier.
I know nothing about welding, but TIG does such fine work!
Nice table. like the adjustable height option and hiding the screw in the legs
Good first project for a new welder. Once you get the tools to build this you will be able to build more interesting things.
Well done! How you could give this vid a thumbs down is beyond me.
Some people are just jealous asshole know it all's!
Nice simple and clean build. I tried the bolts for leveling on a bench I did - used bolt sizes too small for the weight of the bench and found them to be binding.
Cheers
Very nice table. Very nice shop and equipment too.
Hello, I have watched this video twice, you have inspired me to try something new, Thanks
That was a very nice build. Its about time I made another welding table for my everlast equipment. Got myself a powerplasma cutter so I need a downdraft cutting area.
I first saw this video a year ago and was recently talking about how I saw a guy build a beautiful welding table, so I had to see it again. Still impressive!
made one of these welding benches after watching this.great simple design.thanks
love how you left the bottom support off one side, great design. good vid bro!
Very nice work which requires a significant know how. Congratulations and many thanks.
Been looking at tables, best I've seen ! Great, good sounds too !
Love that table!!! Casters are epic. Just take it easy on your ceiling 😆
minimalist, yet powerfull table.... omg... it's so cool.... dat flatness....... awesome !!!
very nice and neat, love the simplicity. those nuts are a beast of a size.. well done
Phil hi. I am an amateur welder and I like to do small weekend welding projects. I do not have a welding table and am interested in making one. The thing is, I don't have room in my garage for a table like this. BUT researching UA-cam for a collapsible welding table, info is scarce. I think it would be very interesting if you uploaded a video making a foldable one, even the same size as this, but one that can be folded and placed against a wall. I'm sure there are many people in the same position with me. Thanks!
well done - it seems to work perfectly for the purpouse
Your skill set is crazy.... Great Job!
Those ceilings will get you every time.
Very nice table.
very good
you did a great job!
Very good
This can't be good......that shop is way to clean and he welds beautifully
Very nice well done 👍
good tip on welding those four plates together like that 8D
That's a bad ass table lol love it
Beautiful build.
Very good 👍🔧
Hi, I'm Peruvian, good work congratulations 👍
nice table, thanks for the inspiration :)
I loved it so I'm going to be mine, I know it's super tough and very handy thanks for this great video
I watched it with a lot od pleasure, this was done in a very good way, I am thinking in one for me.
nice table I have built a few the same way only thing I would do different is let the plate hang over the tubing a bit so clamping is made easier sometimes the tubing makes the clamps slip
kalei p agreed 100% but still love it
@kalei p. That is an interesting thought. I am about to build a welding table in the next two weeks. I have designed one that has the same dimensions for the table top as Phil's here, (1800mm x 700mm) but I am going to have 100mm of plate hang over the tubing all around. My thoughts are so that I can use clamps, which you mentioned also. I am planning on using 6mm mild steel plate for the top. Do you think 100mm stick out would be okay or do you think it might be too much. I have seen a lot of builds but I haven't seen any with an overhang like I am planning.
Nice work man.. real clean
Great table!
Very good work, congratulations.
I **really** love your saw man!!! 🙂
I Hope he mean real fasists no peple who are naming fasists but who aren't fasists
Not much cleaning up afterwards when looking at mig-welding. I don't weld much and don't mind cleaning up the welds. But this is more my pace with tig-welding. I'm not sure to change machine, but i like the outcome of the tig-welds.
The welding table you made looks good.
Most of the places I live prefer thicker iron plates.
I used a 1/4 in steel plate for mine but I was also aiming for a 500-1000 lb table
Nice work ! 👍
Good Job
Great job on the table I’m also in the process of making a work table as the wood table I had was rocking like 60’s disco 😱😰
Nice work !!!Very Nice
Good job!
Very nice
Awesome build bro.
Sweet welding table!!
Dope, that'll last a lifetime.
Super czyste wykonanie
Like how it’s adjustable AND has castors. I am going to do that on mine.
Great idea. Great table build
If I do a video I will link to yours on the castor idea and give credit. Of course
New subscriber here. Can’t wait to go watch all your old vids
I Am start to study this topic but I Like a lot . thanks for your time to learn.
Very nice, good job
Nice build man!
I’m about to build a table myself I think I’m stealing you adjustable leg idea lol
Dimensions of this Table: 180x70cm, 100cm in height, the tubing is 45x45x2mm, threaded rods and nuts are M36
Phil Vandelay can you make me a table or how much did the materials cost?
Just my hitghth I'm in a wheelchair and like how it's adjustable great video ima try and make one I have most of the tools just not a tig welder a mug with fix wire but I do have a metal chop saw
SNOOP U 2 he lives in Germany, maybe someone close by can help you
Wolfman Jack thank you for replying, I have a welder I've been a welder for 20 years, I was just looking for the lazy way out, I can use some of hi ideas I did draw out my own work table on paper with the measurements and all. I do have metal foundries that that sell metal. Thanks again Wolfman Jack for replying I do appreciate that I learn off comments to on UA-cam comments teach to.
Nice work Buddy
awesome work table.
Está chingona, good job!
Very well done. Thank you for sharing.
Simple, elegant.
Great job and nice shop man!👍🏻
Good afternoon, Phil.
From now on I must tell you that the table is excellent ... I need to know if, in any place you have detailed the measurements of the table and the materials that you used ?. From now I thank you the information.
Greetings from Argentina, Angel
Hey thanks. As far as I remember the steel plates were 60x70cm each and 8mm thick. So that makes for a total width of 180cm, the base has the same size obviously. The square tubing is 45x45x2mm construction steel and the threaded rods and nuts are M36. I made it so that the height is adjustable from about 80cm to 120cm, right now the table is at 100cm working height just like my large workbench. The wheels are 150mm in diameter if I remember correctly and all of them can be locked in position.
very nice.quality
good work man
Nice work and good video.
Love the sticker
nice job!
Nice Build
Hello , im from Argentina. Amazing Job! And soo clean.
NICE JOB.
Nice job! I like the design.
Yes!that bandsaw remembers Woody!!!
Badass table badass welding 👌
nice job
Fine. Congratulations
great project and amazing skill level thnx for the share
very very nice work
Nice and easy
I really want to make one of these for myself now. Good project to use the everlast welder on.
Quedó chingona la mesa, gracias por compartir.
Great job, Thanks for sharing.
Fantastic work! Will you be doing more videos like this soon?
Yeah I build all kinds of stuff and I plan to keep making videos!
Muito bem feito e lindo, parabéns! Além de um excelente profissional, você é um bom operador de câmera; tudo bem documentado. Eu vivo em Brasília, no Brasil, e de todos os videos que eu vi o seu é o melhor, eu vou copiar, fazer uma igualdade. Deus te abençoe. Sucesso.
Very well done and beautiful, congratulations! Besides an excellent professional you are a good cameraman; all very well documented. I live in Brasília, Brazil, and of all the videos I've seen yours is the best, I'll copy, make an equal. God bless you. Success. André Boaventura
Zero splatter with Tig...... that's impressive!!
Increíble trabajo!!!
very nice!
JoeCubicle jjiuiiiiiiiii777777778800000
Schönes Design, super Umsetzung! Gefällt mir richtig gut! 😎👍🏻
Grüße aus Ostfriesland 😊
Great job
Very good vidéo
Goodjob