Just installed a gmrs according to your instructions. I wrapped the end of the power cord with a small amount of electrical tape, and then sprayed with vegetable oil to reduce drag. It slid right in the hole😮😅😅. I really appreciate.
Great video! Looking at new trucks and ham radio install is def a factor. I wish bullet proof diesel did a third brake light mount for these like my ford.
Thanks for this how-to video. I installed a Yaesu FTM-400XDR today and your video made it simple to take on. The only thing I did different was use the grommet on the opposite side near the battery for the power cables.
This is EXACTLY what I was looking for. I can only hope that my 2024 Silverado LT is similar in design. And, GM didn't throw me any curves on this one.
How’s the swr? Might want to check. Before I got a meter, I put the antenna on a corner (mag mount) and it was “ working” with my HT, thought I noticed my HT would warm up. I got an SWR meter and found that my SWR was near 2!! So some “fine tuning” on placement got me ack down to 1 (or near enough).
@@ropnjessi In comment above he stated " The SWR is fantastic. About 1.1-1.3. I have been pretty happy with it. Range isn’t fantastic but with its size that is to be expected."
I just stumbled upon this. It was EXTREMELY useful 🙂 I am planning on installing a GMRS mobile unit in my 2022 Suburban High Country. Thanks for providing this!
The NMO cable in the link in the description is 16.75 ft. Is this the length you used? If so was it too long requiring you to coil some of it or was it about the correct length?
Thanks for the info! I am curious where you hooked up the power cable to? I ordered the same truck (different color) and am finally expecting delivery this week, and plan on installing a CD radio as well. Thanks!
There is another option on the passenger side that is fairly easy to access as well to pass the wires through the firewall. Looks same as on driver's side. Did not encounter foam on this path in my 2022 LT.
Exactly what I needed to watch!! I was trying to figure out how to mount my Kenwood TM-V71 radio and antenna, in my 2021 Tahoe Z71. I will be purchasing that Compact antenna. Better spot than the roof mount I’m using… which is a good spot.. but over time though…….😏 Can you share what type of speaker you have? It’ll fit in nicely in the same area as mine. You just saved me a lot of time! THANK YOU!
Great video. Looking to get a mobile for my rebel and was looking for a good stealth antenna like they have for gmrs applications that would work well for 2m also. Any idea what kind of swr readings you're getting?
I also have a 2022 Chevy Trail Boss (and I love it). I just got into Ham Radio (passed all 3 exams in Summer 2023). Your video is very helpful to me, but I wish you could have talked about, or better yet shown, what specifically you did to connect the radio to the battery (or ground point).
What speaker is that? Your install looks very well done. I'm looking at a Silverado soon and will be moving my Kenwood from my Jeep to the new truck and this guide will be very helpful. Great video, thanks for making it!
Very useful; I just got a 2023 suburban, looking to figure out how best to do my install; I'm not sure if I'll do it all exactly the same as you did, but I suspect mostly the layout is close enough to the same that this will be super useful. I'm hoping you'll answer one of us about where you're pulling power from =] You didn't indicate that you pulled anything new through the firewall, so I'm wondering if you found something already there which is good enough or if you skipped something =]
@@Hornman120well, kinda... I haven't figured out where inside to put it yet, but we're going on a trip soon and my two oldest boys (14yo and 12yo) just got their licenses, so I think it's time to finish =] What I've done so far is I installed the NMO mount and then I ran it actually through the hinge of the door -- there is just enough room in there that it closes without pinching anything and then I ran it through the trim and it's nearly invisible. I have it ending in a little pocket on the driver's side of the center console, I was thinking I could possibly slide a radio in there with a remote control head in a cup holder mount. I'm not sure I can still fit power through the same side through the trim, however. For pulling the power there is a bolt on the passenger side under the hood which has a huge cable from the - terminal of the battery -- I connected to that, then I opened the cover on top of the battery and attached the + to one of the terminals in there.
Did you have to remove the panel on the center console to hide the cable. Also, did you cut the CB connector off to feed it thru and reattach the connector back on the cable?
How well is that mounting location working after 7 months? Repeaters and any Simpex? I'm very interested in going more stealth on my new truck, my old truck I mounted exactly like you but using a ~32" NMO diamond antenna.
It has been the best mounting option I have had in a long time. One added benefit is that it does not leave any mark on your hood as compared to a clip hood mount I had used on a previous vehicle. I would definitely recommend it. I will say that the antenna does not quite have the reach my prior larger antenna had but still has plenty of range for the repeaters in my area.
The CV3ANTNCG Antenna mount bracket in your video looks like it is black, on-line I can only find that bracket in silver. Is your bracket actually black or is the video misleading?
This is exactly what I was looking for! I don't have a center console, but shouldn't be an issue. Firewalls are always difficult. How did you mount the mobile base? I didn't see a bracket? I assume no screws in that spot due to the floor ductwork.
The coax I had allowed me to screw the outer part of the end off. So I was left with just the center conductor on the end of the coax. Punched a hole wit the metal rod and then was able to force the coax through just enough to grab it on the other side of the wall from inside the cab. Took a bit of playing but it worked. I was going to use electrician fish tape if I couldn’t reach it. Good luck!
I have the same truck and love it. Definitely gonna order the mount and nmo coax. Could I use that mount on the passenger side? Also what is the SWR like with the compactenna mounted there, I remember looking into that antenna but it seemed like it was supposed to be used with a mag mount so I lost interest.
Ya I have loved the truck. The mount is driver side specific. They may have a passenger side version. The SWR is fantastic. About 1.1-1.3. I have been pretty happy with it. Range isn’t fantastic but with its size that is to be expected.
@@TheDadNerd I came across your very well done installation and video presentation here. It may help to know that the COMPACtenna 9" model 2M/440+ provides even greater range.
Hey NerdDad, how do you like that NEW Compactenna? I have heard alot of good things about it, but I would like to know your opinion about it. I was going to buy a Comet dual Band antenna which is much taller, but if this is a good as what I have read and seen in video's I may have to go this route. I too am installing into my new truck. Please let me know your honest review of that Compactenna please. Thank you. Love your video.
Hey Christian! I have really enjoyed this antenna. Biggest pros for me are the fact that I can pull in and out of my garage without it dragging along the top and its sleek look. As comparted to larger antennas it has a bit shorter range but that is to be expected and it is still more than enough to hit all repeaters in my area. The SWR is also great on multiple bands. If things like height and looks are important it is fantastic option. If those things are not important to you, you would get better performance out of a longer antenna. As with all ham antennas, it is all a compromise.
@@TheDadNerd Still thinking on that antenna. However I now have a different question for you. I am thinking of now buying that TYT Quad band radio. I have seen alot of good and bad video's on you tube about it, but you as a user, how do you feel about it? How long have you had it, I have heard that they just stop working after a few months, THAT I am worried about, don't want to buy a radio that won't last. so I respect your opinion, so I am interested in what you have to say. Also, Does that antenna work for 10 meters?
@@TheDadNerd I just placed my order for this mount and antenna. I have a similar truck and appreciate your video immensely. It will be a big help to me and others with late model GM trucks needing to install ham radios.
Just installed a gmrs according to your instructions. I wrapped the end of the power cord with a small amount of electrical tape, and then sprayed with vegetable oil to reduce drag. It slid right in the hole😮😅😅. I really appreciate.
Excellent! Glad it helped.
What SWR are you getting with this antenna being installed at that location on your truck?
Great video! Looking at new trucks and ham radio install is def a factor. I wish bullet proof diesel did a third brake light mount for these like my ford.
Thanks for this how-to video. I installed a Yaesu FTM-400XDR today and your video made it simple to take on. The only thing I did different was use the grommet on the opposite side near the battery for the power cables.
Great video. I have close to the same truck and wanted a short antenna. Also was curious about how to run the wire. Thanks for covering it all.
Glad it helps 👍
What was your SWR?
Thank you! I'll be running wires in my 2020 GMC and this really helped!
This is EXACTLY what I was looking for. I can only hope that my 2024 Silverado LT is similar in design. And, GM didn't throw me any curves on this one.
Thank you so much very informative and useful
How’s the swr? Might want to check. Before I got a meter, I put the antenna on a corner (mag mount) and it was “ working” with my HT, thought I noticed my HT would warm up. I got an SWR meter and found that my SWR was near 2!! So some “fine tuning” on placement got me ack down to 1 (or near enough).
I'm curious as well about the SWR with that mount at that location? It looks good but SWR is important.
@@ropnjessi In comment above he stated " The SWR is fantastic. About 1.1-1.3. I have been pretty happy with it. Range isn’t fantastic but with its size that is to be expected."
I just stumbled upon this. It was EXTREMELY useful 🙂 I am planning on installing a GMRS mobile unit in my 2022 Suburban High Country. Thanks for providing this!
Glad it was helpful!
Can you tell me the model of this antenna? I want to instal on my trail boss too. Great video! Thanks.
Hey bro, great video, I really like my comptenna I was happy with it during a overland drive I was hitting repeaters I didn’t think would get thru.
The NMO cable in the link in the description is 16.75 ft. Is this the length you used? If so was it too long requiring you to coil some of it or was it about the correct length?
Thanks for the info! I am curious where you hooked up the power cable to? I ordered the same truck (different color) and am finally expecting delivery this week, and plan on installing a CD radio as well. Thanks!
Fantastic video. I plan on doing this same install on my 2021. Thanks for the detail...
There is another option on the passenger side that is fairly easy to access as well to pass the wires through the firewall. Looks same as on driver's side. Did not encounter foam on this path in my 2022 LT.
I like the Velcro idea for the head unit. I have a 2017 Sierra and have been struggling to find a good location for this without drilling! Thanks
Exactly what I needed to watch!! I was trying to figure out how to mount my Kenwood TM-V71 radio and antenna, in my 2021 Tahoe Z71. I will be purchasing that Compact antenna. Better spot than the roof mount I’m using… which is a good spot.. but over time though…….😏
Can you share what type of speaker you have? It’ll fit in nicely in the same area as mine.
You just saved me a lot of time! THANK YOU!
Have you had any issues with the antenna placement. I have a compactenna and was debating putting it on the front fender like that.
Great video. Looking to get a mobile for my rebel and was looking for a good stealth antenna like they have for gmrs applications that would work well for 2m also.
Any idea what kind of swr readings you're getting?
I also have a 2022 Chevy Trail Boss (and I love it). I just got into Ham Radio (passed all 3 exams in Summer 2023). Your video is very helpful to me, but I wish you could have talked about, or better yet shown, what specifically you did to connect the radio to the battery (or ground point).
What’s the length of your power cord? Are you running to the battery?
What speaker is that? Your install looks very well done. I'm looking at a Silverado soon and will be moving my Kenwood from my Jeep to the new truck and this guide will be very helpful. Great video, thanks for making it!
Why did you go with the tri band antenna when it only works with 2 bands on your radio? Love the set up though
I considered that, but with not much of a price difference I figured I would future proof and do tri band incase I use it on a different radio.
Thanks for a great video. You saved me tons of time and frustration!!!! Great job!
How does the antenna work for you located in that spot. I’ve read some comments where it got interference from the engine?
There is another nipple for running wire on passenger side which is a lot easier to access and get to by removing or lowering glove box.
Very useful; I just got a 2023 suburban, looking to figure out how best to do my install; I'm not sure if I'll do it all exactly the same as you did, but I suspect mostly the layout is close enough to the same that this will be super useful.
I'm hoping you'll answer one of us about where you're pulling power from =] You didn't indicate that you pulled anything new through the firewall, so I'm wondering if you found something already there which is good enough or if you skipped something =]
@thehamstudy did you ever get your radio installed? I have a 2022 Suburban with Duramax and my engine compartment is VERY crowded. Thanks
@@Hornman120well, kinda... I haven't figured out where inside to put it yet, but we're going on a trip soon and my two oldest boys (14yo and 12yo) just got their licenses, so I think it's time to finish =]
What I've done so far is I installed the NMO mount and then I ran it actually through the hinge of the door -- there is just enough room in there that it closes without pinching anything and then I ran it through the trim and it's nearly invisible. I have it ending in a little pocket on the driver's side of the center console, I was thinking I could possibly slide a radio in there with a remote control head in a cup holder mount. I'm not sure I can still fit power through the same side through the trim, however.
For pulling the power there is a bolt on the passenger side under the hood which has a huge cable from the - terminal of the battery -- I connected to that, then I opened the cover on top of the battery and attached the + to one of the terminals in there.
how did you attach the base of radio under your seat?
I'm about to do a similar install. Is it OK to run the power and antenna cable through the same grommet?
Did you have to remove the panel on the center console to hide the cable. Also, did you cut the CB connector off to feed it thru and reattach the connector back on the cable?
How well is that mounting location working after 7 months? Repeaters and any Simpex? I'm very interested in going more stealth on my new truck, my old truck I mounted exactly like you but using a ~32" NMO diamond antenna.
It has been the best mounting option I have had in a long time. One added benefit is that it does not leave any mark on your hood as compared to a clip hood mount I had used on a previous vehicle. I would definitely recommend it. I will say that the antenna does not quite have the reach my prior larger antenna had but still has plenty of range for the repeaters in my area.
The CV3ANTNCG Antenna mount bracket in your video looks like it is black, on-line I can only find that bracket in silver. Is your bracket actually black or is the video misleading?
I was wondering if you were going to post a video with the new truck, I'm jealous
This is exactly what I was looking for! I don't have a center console, but shouldn't be an issue. Firewalls are always difficult.
How did you mount the mobile base? I didn't see a bracket? I assume no screws in that spot due to the floor ductwork.
Glad it helped! To be honest the base is with Velcro as well. Time will tell if it lasts but so far it hasn’t budged.
Hey bud,I just purchased a 2022 Silverado 2500HD.
Like your installation.
My question is how did you snake the coax inside for the antenna?
The coax I had allowed me to screw the outer part of the end off. So I was left with just the center conductor on the end of the coax. Punched a hole wit the metal rod and then was able to force the coax through just enough to grab it on the other side of the wall from inside the cab. Took a bit of playing but it worked. I was going to use electrician fish tape if I couldn’t reach it. Good luck!
@@TheDadNerd sounds good, thank you very much!!
I have the same truck and love it. Definitely gonna order the mount and nmo coax. Could I use that mount on the passenger side? Also what is the SWR like with the compactenna mounted there, I remember looking into that antenna but it seemed like it was supposed to be used with a mag mount so I lost interest.
Ya I have loved the truck. The mount is driver side specific. They may have a passenger side version. The SWR is fantastic. About 1.1-1.3. I have been pretty happy with it. Range isn’t fantastic but with its size that is to be expected.
@@TheDadNerd I came across your very well done installation and video presentation here. It may help to know that the COMPACtenna 9" model 2M/440+ provides even greater range.
I found a cable on ebay that you can run under your console and be able to cable the mic cable come up between the console and seat
You think I can get a 1/0 power wire through the firewall?
WoW what a great video ! Keep up the good work :)
Good job! Nice truck too!
Thanks Shawn!
Hey NerdDad, how do you like that NEW Compactenna? I have heard alot of good things about it, but I would like to know your opinion about it. I was going to buy a Comet dual Band antenna which is much taller, but if this is a good as what I have read and seen in video's I may have to go this route. I too am installing into my new truck. Please let me know your honest review of that Compactenna please. Thank you. Love your video.
Hey Christian! I have really enjoyed this antenna. Biggest pros for me are the fact that I can pull in and out of my garage without it dragging along the top and its sleek look. As comparted to larger antennas it has a bit shorter range but that is to be expected and it is still more than enough to hit all repeaters in my area. The SWR is also great on multiple bands. If things like height and looks are important it is fantastic option. If those things are not important to you, you would get better performance out of a longer antenna. As with all ham antennas, it is all a compromise.
@@TheDadNerd Still thinking on that antenna. However I now have a different question for you. I am thinking of now buying that TYT Quad band radio. I have seen alot of good and bad video's on you tube about it, but you as a user, how do you feel about it? How long have you had it, I have heard that they just stop working after a few months, THAT I am worried about, don't want to buy a radio that won't last. so I respect your opinion, so I am interested in what you have to say. Also, Does that antenna work for 10 meters?
How does the antenna do in car washes?
Definitely want to take it off for car washes. The mount is fine but I unscrew the antenna for all car washes.
@@TheDadNerd I just placed my order for this mount and antenna. I have a similar truck and appreciate your video immensely. It will be a big help to me and others with late model GM trucks needing to install ham radios.
Theres the same grommet on the passenger side that is unobstructed same type same location just behind the battery
That is a good point, if you are putting your radio on the passenger side that is a good option.
@@TheDadNerd i put it in the middle and there's no pedals or anything to get around to to to the middle from the passenger side.