3 MAJOR Problems With Jon Boat Gas Tanks
Вставка
- Опубліковано 26 сер 2024
- In this video we walk through 3 common problems people have with their outboard / jon bot motor's external gas tanks.
I'm not a pro mechanic and not an expert, always do your own research and always read the user manuals for your specific gas tank and outboard.
My Motor: 6HP Mercury 4 Stroke
My Jon Boat: 1984 12' Crawdad Flat Bottom
Boating and motor repair can be dangerous, always seek a pro mechanic if you are unsure about a repair. Always read your user manuals, wear a life jacket and think about taking a boating safety course.
For million $$$ sponsorships (or just wanna chat) hit me up at skinnyriveroutdoors@gmail.com
Below are links to all MUST HAVE parts for a Jon Boat and some of my favorite items. Clicking these links help support the channel.
THANK YOU!
Quicksilver Marine 10W-30 Motor oil --- amzn.to/3JJTXdK
Oil measuring can --- amzn.to/3tIq082
Valvoline 80W-90 Lower end unit gear oil [tube] --- amzn.to/3JJU356
Quicksilver 80W-90 Lower end unit gear oil [needs a pump] --- amzn.to/3DeyUxe
Lower end unit gear oil pump --- amzn.to/35gmTLn
E3 Spark plug --- amzn.to/3uEMDKa
Replacement impeller --- amzn.to/3uvlyc9
Carb cleaner submersion --- amzn.to/3DekMEe
Carb cleaner spray --- amzn.to/3II8Prt
Anti-seize grease --- amzn.to/3JKYGff
Marine grease --- amzn.to/3JJU88U
Grease gun --- amzn.to/3iH5ezw
Fuel filter --- amzn.to/3Dj0V7a
File for prop edge repair --- amzn.to/3tLs1k9
Great Dewalt tool set --- amzn.to/3JELsAx
My camera stuff:
Camera Canon SL2 DSLR: --- amzn.to/3DhJBzp
My favorite lens Nifty 50 - 50mm f1.8 --- amzn.to/3DipuAM
Amazing Cheap Popvoice Lav mic -- amzn.to/3ILTsOK
Amazing Cheap Tripod --- amzn.to/3LhCjyf
GoPro Hero7 Black --- amzn.to/3IJnjaE
My Dream DSLR Lens Sigma 18-35mm, f1.4 --- amzn.to/36w2NgA
More Favs:
Fav lifejacket --- amzn.to/35gzGxf
Fav budget fishing reel --- amzn.to/3JNedev
Fav budget fishing rod --- amzn.to/3JOJkGk
Fav fishing line --- amzn.to/3uA7i1E
Fav fluorocarbon leader --- amzn.to/3iDMReK
Fav lure --- amzn.to/3JJJsH3
2nd fav lure --- amzn.to/36TzqVy
THANK YOU FOR THE VIEW! Above links are affiliate. Using those links helps the channel!
Disclaimer: Use at your own risk. SAFETY FIRST! Always read your own owner's manual and service manual and understand all safety items for your specific boat, motor, and parts. I am not an expert mechanic or electrician. All of the information I share is for entertainment purposes only. Consult your boat, motor, and parts' manufacturer, owner's manuals and service manuals for expert advice. Boating and repairing/maintaining a boat motor can be dangerous. Please make sure you fully understand all risks involved so you do not get injured or worse. Once again, all content on this channel is for entertainment only. Please only attempt any of the things in these videos unless you have adequate skill, have fully read the owner's manual and service manual, and even then continue at your own discretion and risk. I am not responsible for your boat, motor, and am not responsible for keeping you safe. I am not an expert and not responsible for any errors or omissions, or for the results obtained from the use of this information. This is for entertainment only. All information in this video is provided "as is", with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information.
I have a 40 hp mariner on a bass tracker had the same issues. Changed gas line to motor like you and the impeller last was the fuel filter like you said and boat is running like new. Thanks for help figuring out the fix.
Change your fuel too the black fuel line especially in a tank like that that's not letting the fumes out it will eat a stupid cheap liner in the fuel line and clog up your carburetor and filter , I did it a couple years ago I cleaned the carburetor 2 times before I took the line off at the tank and it was clogged with like a white gel.
Good point, I already see some bits in my fuel filter. They are crap!
I'm keeping all your tips in a file...easy to look-up when needed! 🎣
I really appreciate you saying that. Thanks!
Awesome video! I’ve had all these same problems with my portable fuel tank, especially here in Texas during the summer. Keep up the good work!
Thanks for the view and comment! I appreciate the support
Take off the fuel cap and undo to screw holding it together. Pull out the rubber plug inside the cap. Your vent will now work as it should.
But then it’s no longer EPA compliant 🤣🤣 totally kidding
Thanks man
Good tips on the tank itself
Thanks for the view!
Thank you for sharing! 🐟🪝🎣
Thank you and thank you for your service
You're welcome,@@Skinnyriver 🐟
Also, I want to add this about one of your vids on cooling water impeller replacement on a Tohatsu /Mercury 5 or 6 HP , 4-stroke outboard motor . You edited out the part where you fought like hell to get the drive shaft splines to engine, lower water pick-up tube to upper water pick-up tube, and the lower to upper gear shift linkage all aligned up together at the same time so the lower up will mate to the middle unit . 🤨 This is the trickiest / hardest part of water impeller inspection/replacement !
Dude, just watch a different channel, im just doing my best
How many miles do you get on a 6hp with that 3 gallon tank?
A lot! Probably about 22 miles to gallon
How would you decide to get the 6 HP outboard *with* or *without* the internal gas tank?
I’d rather have an internal tank. Having one with internal tank and carrying a small 1 gallon emergency tank will get you almost any where you want to go. If you have a bigger boat the external tank maybe best, but it takes up a lot of space and is heavy
Gas suspense from the heat internal pressure inside these cheap gas tanks will cause them to spend and could possibly blow up and killing somebody😊
💣
Have you seen born again boating on fuel stabilizers? He stated no to use them as all they do is mix the water with the fuel which in the long term can cause damage to the engine instead he says buy ethanol free gas for your boat .
Yeah I’ll check it out. I usually use ethanol free but sometimes use an ethanol treatment / stabilizer but it’s all probably a scam
I just bought a new tohatsu 9.8
I am reading through my owners manual.
They recommend to use a filter to separate water.
Have you tried that before?
Or do you think a fuel stabilizer is enough to do the trick?
I just use a fuel stabilizer. It’s worked great. Biggest risk is long term storage, make sure you run it dry or use something like sea foam.
I don’t have experience with ware separators, there is risk of condensation build up and other ways water can get in that these help with. But I just use stabilizer and try to cycle through the gas and not let it sit very long.
You are NOT fully correct in your statements. There is a tank pressure relief valve in the system also . This doesn't allow the tank positive pressure to exceed more than 5 PSI.
You are correct
My motor bogged down on me last week after I filled my tank. Guy on the boat ramp said I over filled my tank causing some vent issues. Could that possibly be an issue for motor to be bogging down?
Man I haven’t heard that, it’s possible it created some weird suction issue preventing the vent from working and it starved your motor of gas. Fill it up less, try it again, if it doesn’t bog down then yeah it was a weird issue with the tank
Yeah i just bought a new gas tank (having these issues with it) and was doing some research and saw a couple of times where it was mentioned that you shouldn’t fill the gas tank all the way up
@CEvalley yeah good point, I had an issue where I filled it all the way up on a hot day and when I opened it, it shot gas everywhere
@@Skinnyriver Right…? And I know no one wants that. I bought the 6 gallon Attwood and the other day after I installed it the temperature got to 70 and it swelled up so damn big it was forcing fuel all the way through the carburetor and was pouring out the bottom of the cowl. Needless to say I wasn’t really pleased about that…. I live in central Alabama and it gets a little warmer than 70 here! As many people are posting complaining about that they really nee to address the problem before someone does get hurt.
Yeah I keep some head space (don’t fill it all the way up). The legal way to fix the issue is add a fuel demand valve. Others not “legal” lol is to leave the cap cracked or remove the rubber valve in the vent. I’m not suggesting the illegal methods 😅😅😅
What should I do if the fuel goes into my internal tank when I try to prime the engine with external tank ? Am I trying to prime too much
That generally means you internal gas tank valve is closed. You have to close it when you use the external tank
@@Skinnyriver thank you, I just tried this but it didn’t seem to work, the internal tank was half way full and after running it with my external tank connected it ends up being completely full, is this something I should be worried about? It even leaks gas out of the internal when I have the valve open
Just wondering if this is normal for the fuel to be pumped from the external to the internal, I don’t have much experience with these motors and wanna make sure everything’s good
@aarongonzalez7913 what motor do you have and what year is it?
@@Skinnyriver it’s a motor that came with a Bote rover I bought. Hidea 6hp, I read online that it’s basically the same thing as a Yamaha 6hp
I just leave the lid open a crack
Problem solved
Don't you love those government regulation gas tanks. I rip that crap out when I buy one, LOL!!!
lol 😆
Lol my 85 sucks one of those cruise-a-day tanks within a day of boating, half if I troll... boating is an expensive hobby when you want speed lol
Yes it is lol not counting towing it to the lake
@@Skinnyriver 😆 I run a 99 ram 4x4 crew cab long box to tow my toys lol tell me about it
Hold the camera still dammit.
Yes it floods my outboard into a non starting condition and causes excessive fuel in the air and water. Stupid epa engineering. Rip off the rubber.
Yeah it’s frustrating. Watch out here comes the EPA police 😂