I found the Pledge Revive It at Walmart and have used that stuff on all of my models, even diecast ones, ever since you showed how to do it many videos ago. I've actually used Quick Shine on wood floors and remember it being somewhat milky. I think the Quick Shine will be a nice alternative if you can't find the Pledge, your model truck looks fantastic by the way and the Quick Shine seems to work just fine. When I restored a 1972 Roadrunner by MPC for a friend of mine, I clear coated the model. When I had the model all together I then used Pledge Revive It Floor Gloss on the model and applied liberally. I have a dedicated brush for applying the Pledge by the way. After a few days of naturally curing, I then used a marine polish on the model and, oh man did it ever gleam!!!! That model was so slick that I nearly dropped it. I only buffed it with a small piece of a cotton t-shirt and it had and still has such a beautiful shine. Thanks for all you do Chris, you're videos are very helpful, very informative, and very much appreciated!!! Thank you Sir!!!
Been using Pledge since your first video suggestion few years ago, I still have 3/4 of a bottle left. It also works for window scratches and cloudy windows.
I am so glad I found your channel and this video. I'm disabled and model from bed and can't use a airbrush or aerosols. I've been searching to see if I can use floor polish with a brush and finally got my answer. Thanks so much for the great content on your channel. I have a question for you, can I use the floor polish with a brush to seal in my decals, do a pin wash or weathering then apply a flat coat with a brush for my military models I don't want a gloss finish with? Will brushing on a flat coat reactivate the floor polish and mess everything up? Thank you so much for any help and I've got plenty of great videos to watch and catch up on.
I know you promote what works best for you and pass along good information. I am a fan of Testor's Wet Look Clear - One Coat Spray Lacquer. Yes - it is more expensive and some builders have trouble with getting nice finishes with rattle cans. I have many years of experience and am happy with the results that I get from the Testors product. Everyone has to decide what works best for them !
Tester’s wet look clear saved me so much time and money. I found that I don’t need to polish my scale model cars when using this clear coat. It gives me a deep rich mirror finish straight from the can!
Thanks so much for this video! I was originally looking to grab Pledge as a brush-on alternative to finicky spray varnishes, but I'm so glad to see folks have done the heavy-lifting of finding a great replacement now that Pledge/Future is unavailable.
Hi Chris iam going to try quick shine this week .I couldn’t find pledge. So I think iam going to used quick shine and see how it gos. I will let you know Chris. I just got back in the hobby. Thanks for the tip
How did it go? Does it still look good? I just put some on a model yesterday and so far it looks great. Would be good to hear some input from long term results.
Looks like I’m going to have to reply to myself. Over a month later, mine still looks shiny and great. Good replacement for the old future floor polish variants.
Hi Chris I know it sounds crazy but it did. I went to the store and bought Quick shine. When I got home and took out of the bag it exploded every where. Like I said I just got back into this hobby and would like some pointers on this subject sincerely anthony
Thanks for the alternative floor wax and proof test. Looks good. It’s been a while since I lived as far North as Fleet Farm stores. They seem to be a regional chain. Not a complaint, just an observation. But Quick Shine appears to be in Walmart, so all is good. Thanks.
I think there are some 30+ year old unopened bottles of Future (maybe it's Klear) under the kitchen sink. I wonder if they are still good? 😂 My real question is have you tried using Quick Shine as a thinner/medium/flow improver for acrylic paints? It seems like it would be ideal for that. I will get a bottle next time I'm at Walmart or Fleet Farm. What if you want a matte finish instead of gloss? I'll be painting and finishing model tanks, and they are not supposed to be shiny :)
I too have been using Pledge for years. The bottle I have now has been in my possession for maybe 5 or6 years and I noticed that it does not dry as quickly as it used to. I had the same problem with the original Future. After a few years it begins to degrade. The Future eventually stopped curing and remained tacky for weeks, so I had to switch to the Pledge. Now that Pledge is gone (my old bottle is only quarter used) I bought Quich Shine at Walmart. They only had the large bottle ($11.50). I've been using it on some modeling projects, experimenting with it. Yes, it is more liquid than Pledge but it dries to a better finish than Pledge, without bubbles. The only trouble with Quick Shine is that it's not as robust as Pledge. If you run a fingernail gently over a finished and cured surface, you will leave a mark. Press a bit harder and the Quick Shine will peel. It also takes longer to cure than Pledge. Touching it and rubbing it with the finger does not have any effect. I have not tried air-brushing it yet but I don't think it would be a problem. Mixing it with acrylic water-based paints was no problem also.
thank you for this ! I had been using FUTURE but my supply is now EMPTY. I had been considering QUICK SHINE but now know it is the replacement. Lowes carry's this stuff for about $8. Enough to last years. One thing not mentioned, once models are coated and fully cured ( dried) if an accident happens like paint spilling on the model, it can be wiped off with thinner without affecting the Acrylic clear coat ! ask me how I know !
The rules of supply/demand have the Pledge up to $37 per 27 oz. bottle now. If a person wants to feel better about it, I did some math and that is still WAY cheaper by volume than the Tamiya clear. (If only Johnson Wax made paint for models...27 oz. each color for $8.99.)
Thanks for the video! I have been looking for Pledge but it has been sold out everywhere I have looked and I was looking for alternatives. The Rustoleum spray can clear almost ruined my printed and painted models with crazy inconsistent sprays. Some wet sanding and quick shine floor polish and all is well! Thanks again!
Thank you so much for this tutorial. You always put out outstanding videos and I enjoy when there’s a new one that pops up. I was happy to see this one pop up. Again thank you so much sir. Much appreciated
It's great to know that the Quick Shine works well. I was looking for the Future floor polish, but I couldn't find it so I grabbed a bottle of the quick Shine instead. Thank you for this timely video!
If anyone cares to read the directions on the back of the bottle...It reads "After floor is completely dry, additional coats may be applied if a higher gloss is desired." Four coats seem to give me the gloss I'm looking for---without any adverse effects to the models I applied it to.
Use with caution. I applied this Quick Shine on my Evergreen polystyrene clear plastic windows. It basically ruined them...I brushed it on as in the video, I got wavy pool spots on the windows when it dried, which was a disaster. The only thing I can explain is it reacted with the Novus polish I had cleaned the clear plastic prior to the Quick Shine. So I tried it on unpolished plastic, same result. Maybe this is acceptable to some, but it looks horrible as far as I'm concerned.
This just popped up right when i was wondering if i could use floor polish that i already have instead of car polish to polish model cars! arrh... what a tongue twist X)
I have always sprayed it on. The issue I have with replacements is the ingredients. Future clearly claim 'acrylic' as the main ingredient. The others do not - they say 'polymer', which could mean anything. Its a crap shoot. My bottle of Future just ran out, too. I'm in panic mode. I have some of the Walmart stuff in the cupboard, for my floor. I'm afraid to even try that.
I loved this video. I came across it while looking for a way to protect my LEGO minifigure key chains. Chris do you think this would work on LEGO Plastic?
HELP please! I just coated my first model in 25 years and it has dried to a dull finish. Any ideas on how to shine or strip it without damaging the paint underneath?
I just tried this on a hood painted with enamel paint and after a day, its foggy. Any idea why? It went on easy and had a nice shine, but became foggy. What did I do wrong? Thanks
Anyone tried Quickshin on model kit like gunpla? Future floor finish dry super thin so it was never a problem for me, but I am worry that quickshine might be too thick.
Great video! As they all are. I used to dip my glass in future floor polish and now, decades later they are still looking great. I just bought a bottle of that floor polish you demonstrated but haven't had a chance to try it yet. What do you clean your brush with after using that stuff? I don't think I missed that but if I did I apologize. I haven't seen that bottle of future for probably 20 years and unbelievably I just found it in the cellar behind some really old automotive lacquer paint from the late 70s. The bottle did turn yellow but the polish is clear
I'm telling ya. I use it every time and don't even spray it. I'm sure I could get a better shine with something more in depth but I'm satisfied with what pledge achieves
Many thanks for this video. I am getting back into the hobby after a several year break, and was looking for Future ...then the Pledge.. no joy unless I wanted to pay ~$50.00 for a $6.00 bottle. I saw this product listed in Walmart, and wondered. Your video is very timely and helpful to me. Your channel is the go to source when I want to see something about a kit, or general modeling how to's. I really like your practical methods to get good outcomes with reasonable effort..
I wanted to say thank you very much. I use Future to make washes for my miniatures. Last time I did a round of dipping I did not see all my large containers of products correctly. I have also been extremely busy with home improvements. So I have not painted and washed anything in months. It turned into a solid mass of India ink and pledge. I could only find it online for 50 bucks a pop. So hopefully the substitute will work if I don’t find any at my local farm and fleet.
I haven't been able to find Pledge Revive It (Future Floor Polish) anywhere locally. You can still find it on Amazon though, but a little pricey. I might try that Quick Shine in the future. Thanks for the video!
I did watch the other and bought that kit and commented on the last video and yes this is very hard to find and one on online was like $30.00 plus dollar I have no fleet farm and Walmart is at a non -stock and yes I bought that I'm hoping is will be the same. 🙂Thomas over at The Model Hobbyist.
I heard a rumor they were going to discontinue the Pledge a few years ago, so I got some coupons and headed to Walmart. I ended up with 7 bottles. I'm betting a lifetime supply!
Thanks for the video. My local Walmarts are already out of stock of the pledge revive it, but I was able to find it in my rural town grocery store. I bought just one bottle since I already have a couple bottles of it. I will try the new quick shine.
It appears that the edges of the hood have a line of air bubbles. Since this was the first thing brushed, I wonder if shaking the bottle before use caused this.
I have a question about Pledge, I got a bottle about a year ago and it turned brown. Do anyone know why and is still ok to use. I keep it under the kitchen sink.
I have some old die cast model Ferrari's that my Grandmother had. No rust, but lots of dust. Can this be used on die cast cars? Any suggestions as a general cleaner to get the dust/shine them up a bit before putting the gloss on? Been looking for a while and can't find anything. Everything I find is for actual cars, lol. Great video.
It will work fine once they are cleaned. The floor polish is harmless to almost anything it's put on. If it was messing up surface the people that use it on their floors would go nuts.
Thank's for the helpful video Chris. Quick question for you. I'm building a 1/24 knight rider kitt model and I paint with the same method as you, spray and pray. I usually have nice results, but after shooting the hood on this model it dried with small bumps in a few places. I'm going to wet sand and I was wondering if applying quick shine as a clear coat after I sand will give me the same results as a rattle can clear coat?
Chris, when I first started watching your channel a couple years back. I couldn't find the pledge at first. I started using the Quick Shine. I worked good for me. But, I did find a bottle of the pledge. But, I still use the Quick Shine once in awhile. It didn't harm my decals at all.
I have used Future since the 90's for aircraft canopies on kits I have built, and they are still clear and shiny to this day. Thanks for the tip about Quick Shine though, always good to have a backup.
I have used quick shine for a while now. It's great stuff. You are doing an awesome job. Keep it up.
Did you use it on clear parts?
I found the Pledge Revive It at Walmart and have used that stuff on all of my models, even diecast ones, ever since you showed how to do it many videos ago.
I've actually used Quick Shine on wood floors and remember it being somewhat milky. I think the Quick Shine will be a nice alternative if you can't find the Pledge, your model truck looks fantastic by the way and the Quick Shine seems to work just fine.
When I restored a 1972 Roadrunner by MPC for a friend of mine, I clear coated the model. When I had the model all together I then used Pledge Revive It Floor Gloss on the model and applied liberally. I have a dedicated brush for applying the Pledge by the way. After a few days of naturally curing, I then used a marine polish on the model and, oh man did it ever gleam!!!! That model was so slick that I nearly dropped it. I only buffed it with a small piece of a cotton t-shirt and it had and still has such a beautiful shine. Thanks for all you do Chris, you're videos are very helpful, very informative, and very much appreciated!!! Thank you Sir!!!
Been using Pledge since your first video suggestion few years ago, I still have 3/4 of a bottle left. It also works for window scratches and cloudy windows.
I am so glad I found your channel and this video. I'm disabled and model from bed and can't use a airbrush or aerosols. I've been searching to see if I can use floor polish with a brush and finally got my answer. Thanks so much for the great content on your channel. I have a question for you, can I use the floor polish with a brush to seal in my decals, do a pin wash or weathering then apply a flat coat with a brush for my military models I don't want a gloss finish with? Will brushing on a flat coat reactivate the floor polish and mess everything up? Thank you so much for any help and I've got plenty of great videos to watch and catch up on.
I know you promote what works best for you and pass along good information. I am a fan of Testor's Wet Look Clear - One Coat Spray Lacquer.
Yes - it is more expensive and some builders have trouble with getting nice finishes with rattle cans. I have many years of experience and am happy
with the results that I get from the Testors product. Everyone has to decide what works best for them !
Place the rattle can in 100 to 110 degree water to warm the contents (may take 30 min.).
Tester’s wet look clear saved me so much time and money. I found that I don’t need to polish my scale model cars when using this clear coat. It gives me a deep rich mirror finish straight from the can!
I could never find the Pledge and have been using Quick Shine for a long time. Works great.
Thanks so much for this video! I was originally looking to grab Pledge as a brush-on alternative to finicky spray varnishes, but I'm so glad to see folks have done the heavy-lifting of finding a great replacement now that Pledge/Future is unavailable.
Hi Chris iam going to try quick shine this week .I couldn’t find pledge. So I think iam going to used quick shine and see how it gos. I will let you know Chris. I just got back in the hobby. Thanks for the tip
How did it go? Does it still look good? I just put some on a model yesterday and so far it looks great. Would be good to hear some input from long term results.
Looks like I’m going to have to reply to myself. Over a month later, mine still looks shiny and great. Good replacement for the old future floor polish variants.
Hi Chris I was using quick shine and the bottle explode. The quick shine every where do you recommend something else. Sin freely anthony
LOL, what?
Hi Chris I know it sounds crazy but it did. I went to the store and bought Quick shine. When I got home and took out of the bag it exploded every where. Like I said I just got back into this hobby and would like some pointers on this subject sincerely anthony
I make diecast police modes. But the quickshine leaves my black parts of the model foggy.
I always use lemon pledge furniture polish on my motorcycles! Dust does NOT cling to it!!
So I just found you. Getting back into to the hobby. You were recommended to find out about the floorpolish. What does it do to the glass?
Thanks for the alternative floor wax and proof test. Looks good. It’s been a while since I lived as far North as Fleet Farm stores. They seem to be a regional chain. Not a complaint, just an observation. But Quick Shine appears to be in Walmart, so all is good. Thanks.
I got a bottle of quick shine a couple of months ago since it's sold pretty much everywhere pledge used to be sold.
I've had good results so far.
I think there are some 30+ year old unopened bottles of Future (maybe it's Klear) under the kitchen sink. I wonder if they are still good? 😂
My real question is have you tried using Quick Shine as a thinner/medium/flow improver for acrylic paints? It seems like it would be ideal for that. I will get a bottle next time I'm at Walmart or Fleet Farm. What if you want a matte finish instead of gloss? I'll be painting and finishing model tanks, and they are not supposed to be shiny :)
Spray and Prey !
Oh sure I’m gonna go right out and buy a fruit dehumidifier and temperature control heater
I too have been using Pledge for years. The bottle I have now has been in my possession for maybe 5 or6 years and I noticed that it does not dry as quickly as it used to. I had the same problem with the original Future. After a few years it begins to degrade. The Future eventually stopped curing and remained tacky for weeks, so I had to switch to the Pledge. Now that Pledge is gone (my old bottle is only quarter used) I bought Quich Shine at Walmart. They only had the large bottle ($11.50). I've been using it on some modeling projects, experimenting with it. Yes, it is more liquid than Pledge but it dries to a better finish than Pledge, without bubbles. The only trouble with Quick Shine is that it's not as robust as Pledge. If you run a fingernail gently over a finished and cured surface, you will leave a mark. Press a bit harder and the Quick Shine will peel. It also takes longer to cure than Pledge. Touching it and rubbing it with the finger does not have any effect. I have not tried air-brushing it yet but I don't think it would be a problem. Mixing it with acrylic water-based paints was no problem also.
thank you for this ! I had been using FUTURE but my supply is now EMPTY. I had been considering QUICK SHINE but now know it is the replacement. Lowes carry's this stuff for about $8. Enough to last years. One thing not mentioned, once models are coated and fully cured ( dried) if an accident happens like paint spilling on the model, it can be wiped off with thinner without affecting the Acrylic clear coat ! ask me how I know !
The rules of supply/demand have the Pledge up to $37 per 27 oz. bottle now. If a person wants to feel better about it, I did some math and that is still WAY cheaper by volume than the Tamiya clear. (If only Johnson Wax made paint for models...27 oz. each color for $8.99.)
Any noticeable difference in the level of shine compared to Pledge?
For Australian viewers, go to Bunnings and get 'Long Life' 1L Self Shining Floor Polish. $13.99 for a litre. 👍 Same stuff.
Thanks for the tip!
No matter how hars I try I get bubble s when I use a rattle can to paint my car body?
Now if you airbrush this can u cleanyour gun with warm water
Chris i just looked on wally worlds website here in long beach WA and they sell it still for $6.29 for 27oz. Keep up the great show.
Thanks for the video! I have been looking for Pledge but it has been sold out everywhere I have looked and I was looking for alternatives. The Rustoleum spray can clear almost ruined my printed and painted models with crazy inconsistent sprays. Some wet sanding and quick shine floor polish and all is well! Thanks again!
Do you have to use clear coat to use this product ?
It's that ok to use the hair dryer to dry the clear coat ??
Thanks Chris, love your tutorials you have such a talent for explaining techniques. Thanks for the reminder about Pledge.
unable to find the Pledge anywhere. :(
Thank you so much for this tutorial. You always put out outstanding videos and I enjoy when there’s a new one that pops up. I was happy to see this one pop up. Again thank you so much sir. Much appreciated
My kits has more than a year with quick shine , no problem so far
why do some sand their pledge?
It is really nice that you have found an alternative. Thanks for sharing.
hay mate do think you coud do a nother sprint car model plz
It's great to know that the Quick Shine works well. I was looking for the Future floor polish, but I couldn't find it so I grabbed a bottle of the quick Shine instead. Thank you for this timely video!
Thanks!
Just found this video. Thanks for the review.
So, after a year, what are your thoughts? Are you still using Quick Shine?
Yup, works just fine.
@@hpiguy Great. Thank you! 🙂🙏👍
Thanks for another good recommendation.
If anyone cares to read the directions on the back of the bottle...It reads "After floor is completely dry, additional coats may be applied if a higher gloss is desired." Four coats seem to give me the gloss I'm looking for---without any adverse effects to the models I applied it to.
Use with caution. I applied this Quick Shine on my Evergreen polystyrene clear plastic windows. It basically ruined them...I brushed it on as in the video, I got wavy pool spots on the windows when it dried, which was a disaster. The only thing I can explain is it reacted with the Novus polish I had cleaned the clear plastic prior to the Quick Shine. So I tried it on unpolished plastic, same result. Maybe this is acceptable to some, but it looks horrible as far as I'm concerned.
This just popped up right when i was wondering if i could use floor polish that i already have instead of car polish to polish model cars! arrh... what a tongue twist X)
I have always sprayed it on. The issue I have with replacements is the ingredients. Future clearly claim 'acrylic' as the main ingredient. The others do not - they say 'polymer', which could mean anything. Its a crap shoot. My bottle of Future just ran out, too. I'm in panic mode. I have some of the Walmart stuff in the cupboard, for my floor. I'm afraid to even try that.
I loved this video. I came across it while looking for a way to protect my LEGO minifigure key chains. Chris do you think this would work on LEGO Plastic?
HELP please! I just coated my first model in 25 years and it has dried to a dull finish. Any ideas on how to shine or strip it without damaging the paint underneath?
I just noticed an Ebay-er is selling 2 bottles for $120. That's outrageous!
It seems the Pledge (or anything like it) is completely gone here. Can't find it anywhere. Except an Amazon listing for $95.
Sitting in direct sunlight, the UV spectrum of light waves will turn the product yellow. I'm an outdoor model railroader.
I just tried this on a hood painted with enamel paint and after a day, its foggy. Any idea why? It went on easy and had a nice shine, but became foggy. What did I do wrong? Thanks
Anyone tried Quickshin on model kit like gunpla? Future floor finish dry super thin so it was never a problem for me, but I am worry that quickshine might be too thick.
Great video! As they all are. I used to dip my glass in future floor polish and now, decades later they are still looking great. I just bought a bottle of that floor polish you demonstrated but haven't had a chance to try it yet. What do you clean your brush with after using that stuff? I don't think I missed that but if I did I apologize. I haven't seen that bottle of future for probably 20 years and unbelievably I just found it in the cellar behind some really old automotive lacquer paint from the late 70s. The bottle did turn yellow but the polish is clear
Looks good to me. I will pick a bottle up. I use the Pledge stuff to thin out my Createx airbrush paints. I will give this a try. Great video!!!!!
Thanks for the video, I had sticker shock 😲 with Amazon Pledge $45.00 I will be picking up a bottle of Quick Shine
I called the SC Johnson customer 800 number and the woman told me they stopped making it in January. She sent a bunch of coupons for other products.
I picked up Quick Shine up to try some time ago. It being milky white steered me away. I still have a full bottle of Pledge I never used.
I'm telling ya. I use it every time and don't even spray it. I'm sure I could get a better shine with something more in depth but I'm satisfied with what pledge achieves
I’m guessing that when you keep saying Future you’re referring to the Pledge revive it floor gloss. Yea?
Yes, it was called Future for 40 years prior.
@@hpiguy I figured that’s what you meant but just checking. I’m trying it out today on a sample piece.
I finally tried it. Wow. Game changer.
I am thinking of buying this quick shine product for my plastic model kits! Thanks for your video!❤️🇨🇦😎
Great video Chris. What kind of paint was this applied to? Laquor, Enamel etc. Thanks
Love your videos
This is priceless. Thank you for sharing your modeling experience.
Many thanks for this video. I am getting back into the hobby after a several year break, and was looking for Future ...then the Pledge.. no joy unless I wanted to pay ~$50.00 for a $6.00 bottle. I saw this product listed in Walmart, and wondered. Your video is very timely and helpful to me. Your channel is the go to source when I want to see something about a kit, or general modeling how to's. I really like your practical methods to get good outcomes with reasonable effort..
I wanted to say thank you very much. I use Future to make washes for my miniatures.
Last time I did a round of dipping I did not see all my large containers of products correctly. I have also been extremely busy with home improvements. So I have not painted and washed anything in months. It turned into a solid mass of India ink and pledge.
I could only find it online for 50 bucks a pop. So hopefully the substitute will work if I don’t find any at my local farm and fleet.
I haven't been able to find Pledge Revive It (Future Floor Polish) anywhere locally. You can still find it on Amazon though, but a little pricey. I might try that Quick Shine in the future. Thanks for the video!
I like this recommendation, and now that I know how you apply it (most everyone I know airbrushes it), I'll be using your method.
I did watch the other and bought that kit and commented on the last video and yes this is very hard to find and one on online was like $30.00 plus dollar I have no fleet farm and Walmart is at a non -stock and yes I bought that I'm hoping is will be the same. 🙂Thomas over at The Model Hobbyist.
I heard a rumor they were going to discontinue the Pledge a few years ago, so I got some coupons and headed to Walmart. I ended up with 7 bottles. I'm betting a lifetime supply!
Thanks so much for this information! Like a few I am recently back to the hobby and was thinking of springing $$$ for Pledge. So helpful!
I found Quickshine in Family dollar. And have used it for over a year without any problems.
Started using 2k automotive clear on my 3d printed sculpts, it’s been working great.
how is this quick shine holding up? Thanks
Still shiny!
Thanks for the video. My local Walmarts are already out of stock of the pledge revive it, but I was able to find it in my rural town grocery store. I bought just one bottle since I already have a couple bottles of it. I will try the new quick shine.
Thank you for this video. I couldn't find the Pledge product anywhere and you saved the day.
When I learned that Future/Pledge would be discontinued, I bought a few bottles to last me a lifetime. Good to know about any alternatives, too.
It appears that the edges of the hood have a line of air bubbles. Since this was the first thing brushed, I wonder if shaking the bottle before use caused this.
Thanks for the test, I use Holloway house pure wax it’s in a pinkish red bottle, it seems to work so far, on internet I paid 6.00 for it.
So where are these 600 models that you’ve built? Is there a hpiguy museum somewhere we can see them? 😃
Fantastic tip keep up the great work. Love the Spray & Pray saying that’s what I do !!!
I used to be a cleaner and use floor sealer, it was milky colour and think it about the same.
Ah. You see, I've never seen one of those videos where you applied the pledge so thus was educational!
Where's a good place to ask for some questions? On here or somewhere else?
I have a question about Pledge, I got a bottle about a year ago and it turned brown. Do anyone know why and is still ok to use. I keep it under the kitchen sink.
Try it on a painted spare piece, give it a good shake before.
Ty so much for this always wanted to try it'. Going to try it now. Ty bud
What do you use to clean your brushes after Quick Shine?
I have some old die cast model Ferrari's that my Grandmother had. No rust, but lots of dust. Can this be used on die cast cars? Any suggestions as a general cleaner to get the dust/shine them up a bit before putting the gloss on? Been looking for a while and can't find anything. Everything I find is for actual cars, lol. Great video.
It will work fine once they are cleaned. The floor polish is harmless to almost anything it's put on.
If it was messing up surface the people that use it on their floors would go nuts.
I’ve used future since the 1st time u showed it on the channel found 2 bottles at the flea market works great
Just curious if it smells like pledge revive it maybe it's the same product
Great review. I always airbrush my revive but I’ll try your method next.
Thank's for the helpful video Chris. Quick question for you. I'm building a 1/24 knight rider kitt model and I paint with the same method as you, spray and pray. I usually have nice results, but after shooting the hood on this model it dried with small bumps in a few places. I'm going to wet sand and I was wondering if applying quick shine as a clear coat after I sand will give me the same results as a rattle can clear coat?
Not usually, the floor polish is not nearly thick enough to cover all that up.
Surprised at the great results you got doing this with a brush! Awesome stuff.
I used Quick Shine on a Tamiya Dark Blue Pearl and let it dry for several hours and it was cloudy. Any tips on why this might have happened.
Never had that issue. Not on glass or anything.
It might take longer to dry depending on the conditions where you are.
and also i got 71 joey saldana sprint car
Am I the only one who got really strong Bob Ross vibes from this vid? I was anticipating when You're going to say "happy accidents". 😉
I'm flattered, he's such a good guy!
Most cool!! Thanks for the demo and your many fine videos!
Wow! Loved it! So many thanks for the video
Thank you. I just found this at Canadian Tire.
Chris, when I first started watching your channel a couple years back. I couldn't find the pledge at first. I started using the Quick Shine. I worked good for me. But, I did find a bottle of the pledge. But, I still use the Quick Shine once in awhile. It didn't harm my decals at all.
Thanks!
As always, thanks for the info on this product!👍
Thanks for the video.Very helpful.
Great video Chris! Thanks for sharing this!!
I have used Future since the 90's for aircraft canopies on kits I have built, and they are still clear and shiny to this day. Thanks for the tip about Quick Shine though, always good to have a backup.
Very cool!
Thank you for that tip Chris I’m going to try it thanks again