Forscan airbag module set up
Вставка
- Опубліковано 18 вер 2024
- New restraint control module was installed in a 2017 ford f350. Used forscan and as built data to program/set it up. It showed an error code in the video, but it went thru and everything was configured correctly!
Questions or comments feel free to leave them!
Hi, I am driving a 2017 ford fiesta. Airbag blow after accident. I replaced all the airbags and seatbelts, and clear the Airbag module. but the airbags light is on and I have these 2 codes that come back right away. B00A:68 and B00A:68-8B (Occupant classification system). please need help.
What do those codes say when you look them up?
Try and recalibrate the ocs system with for scan
Is this what you would need to do if you had to replace a RCM module due to flooding and you bought a replacement?
@@willt1999 yep.
I have a ranger that was in a collision and I’m getting a code for for RCM crash data stored and locked will changing the rcm and programming it clear this code?
Yes or send me the part number on telegram and I could see if my obdstar p50 will clear it.
Hello, I have a Mondeo mk5. I want to delete airbag crash data. how can I do it. I have UCDS PRO+ and elm327 1.5 devices.
No idea. You need a device capable of deleting crash data.
Hey there, I have a 2019 F350, 6.7. I believe it was a flood truck, and I purchased it, not knowing.
We believe the RCM is fried, I lost a lot of communication with other modules, and all issues persist when RCM is unplugged.
I have a matching, used RCM. Do i simply follow these steps? Or would it require me to adjust the VIN as well? I would like to do this without the dealerships' help if possible.
Should be able to use forscan
@Unpluggeddiagandprogramming Awesome. Appreciate the quick reply!
Another question, my symptoms include a complete loss of the front controls interface module, issues with the BECMB, and several messages including service advance trac, Hill control descent, etc.
Could the RCM be the sole culprit do you think? Or should I be replacing multiple parts to be sure I do not fry another RCM?
@@austinwilliams7829 well if u have a bunch of communication codes, and a module is bad it could be knocking other modules offline, and or causing issues.
@@austinwilliams7829 Did you figure it out? I know on 2016 explorers the RCM will throw abs/traction lights also. Have 2 that fried RCM while jump starting dead batteries
Not yet. Insurance is taking over. Two dealers won't even touch it, but I finally found a Ford that would. They are pushing insurance to total the truck.
That is interesting, though! This run of problems started with a parasitic draw, I was jump starting it regularly with a NOCO
Hello, good day.
I have ford flex 2014.
Airbag light is on after accident.
B1193 code comes in DTC.
Also cruise control is not working.
Horn, and other buttons on the steering wheel are perfectly working.
My question is.
If i replace the clock spring only,
The Cruise control will be functional?
The airbag light will turn off?
Please reply.
As i am short of funds now, later i will change the SRS module. But now i need the cruise control to be functional.
Thanks & best regards.
You can try and clear the crash data with forscan. Don’t reset set it, but there’s an option to reset crash data. And have you scanned the cruise control so see what it says? If all the buttons work than there may be another problem or maybe because the airbag light is on it’s disabling the cruise? Either way I would try and get forscan and try and reset the crash flag, and then go after the cruise
Control.
@@Unpluggeddiagandprogramming thanks for the prompt reply.
Clearing crash data, without replcaing the srs module?
@@shabanabdullah1921 forscan has the option to erase the crash data. If you can and it’s successful then you don’t need to replace the module. If you need help feel free to email me and I can remote in
Hi ! I am driving a Ford Explorer 2013.
The driver's seat airbag and the curtain airbag have gone out and the warning light is on.
I scanned it with forscan and found
U0151 Lost Communication Whit Restraints Control Module
error.
In this case, is it necessary to replace/reset the airbag module?
Is it possible to remove the error using forscan?
Please help.
You need to diagnose the U0151. Go thru the diagnostic steps for that code.
@@Unpluggeddiagandprogramming Thanks for getting back to me.
Code:U0151 Lost Communication Whit Restraints Control Module
Status(-2B)
-DTC Present at Time of Request
-Malfunction Indicator Lamp is Off for this DTC
Module: Accessory Protocol Interface Module
OCS
Code:U0151 Lost Communication Whit Restraints Control Module
Status(-2B)
-DTC Present at Time of Request
-Malfunction Indicator Lamp is Off for this DTC
Module: Occupant Classification System Module
ABS
Code:U0151 Lost Communication Whit Restraints Control Module
Status(-AB)
-DTC Present at Time of Request
-Malfunction Indicator Lamp is Off for this DTC
PSCM
Code:U0151 Lost Communication Whit Restraints Control Module
Status(-0A)
-DTC Present at Time of Request
-Malfunction Indicator Lamp is Off for this DTC
Module: Power Steering Control Module
IPC
Code:U0151 Lost Communication Whit Restraints Control Module
Status(-2F)
-DTC Present at Time of Request
-Malfunction Indicator Lamp is Off for this DTC
Module: Instrument Panel Control Module
GPSM
Code:U0422 Invalid Data Received From Body Control Module
Status(-8A)
-DTC Present at Time of Request
-Malfunction Indicator Lamp is Off for this DTC
Module: Global Positioning System Module
This is what the error is
Consigo fazer reset módulo airbag da Ecosport?
If it has a crash locked and full message, stored in the airbag module, it cannot be reset with forscan
Can we do it on damaged airbag without installing new air bag module?
I’m not sure what you’re asking? Can you replace the airbag module and program it without installing new airbags? If so yes, I’ve programmed airbag modules while waiting on parts. But if you have an error code for locked and full crash memory you will need to reset it with iprog, carprog, upa, ultraprog or any tool that will clear crash data.
I bought a used module from another similar f150. How do you change the vin to yours in the new module?
Why would you want to change it to my vin? Or are you asking how to change the vin in the used module to your vin?
@@Unpluggeddiagandprogramming wanted to change the vin in the used module to my vin.
@@vvaskevich that should be possible. I believe if you go under programming and as built configuration rcm you should be able to change the vin. But you also need to make sure the as built data in the module
Matches what your truck had.
As built data on the website has less fields than what my RCM module shows.
Wonder what I should be doing with the extra fields? Anyone had this issue?
@@vvaskevich I usually leave those values alone. You shouldn’t be able to edit those. If you need help send me an email. Cam741149@gmail.com
Hey I’m getting the service interrupted message aswell how do I get rid of it ? I’m using the elm adapter no idea why it keeps coming up with that error
Did you update the firmware on the adapter. And what are you trying to do?
@@Unpluggeddiagandprogrammingyes I’m trying to program the airbag module and the abs module
@@Dan-yt7oe are you pulling the as built data from the motorcraft website? Also when you enter it. Clear the codes. And see if it’s a glitch in the software. Also make sure the device you’re using has updated firmware. And you’re using the latest version of for scan.
@@Dan-yt7oe also make sure you have good battery voltage.
I will try this thank you so much for your help you’re amazing
Do tou have codes as built for Ford Focus sw 2017?
You can go to motorcradts website, enter your vin and pull all the as built data/codes you need.
Can we use FORScan to clear crash data?
Not that I know of. You would need to use a tool like iprog, ultraprog, upa, carprotool or obdstar p50
yes you can
@@an04kerhow so?
Ne yapıyor anlayan varmı
Using for scan to set up a new airbag module. Sorry I did t make it clearer or explain myself in the video.
@@Unpluggeddiagandprogramming So how do we disable the airbags?
@@galimcan06 do you want to disable the airbags?
@@Unpluggeddiagandprogramming yes car mondeo mk3
@@galimcan06 I’m sure you could but I’m not sure.