Fixing A Troy-Bilt Mower That's Smokes
Вставка
- Опубліковано 9 тра 2024
- Links to products I have in my tool bag.
Air Filter. amzn.to/2T8qgxu
Compression tester. amzn.to/2NMgeze
Spark PLUG TESTER. amzn.to/3jEcZH3
Inline Spark Checker. amzn.to/3bnXjmA
Feeler Gauge set. amzn.to/3rTsZK6
Chemical bottle. amzn.to/3eWcGVs
Above are affiliate links which means we receive a percentage of the revenue made from purchasing products via those links.
Thanks for watching. I was told this more might be heavy on oil, and smoking but it turns out to be much worse than that. - Авто та транспорт
That spark plug cracked me up.
Autolite-Cheap WalMart Spark Plug.
thanks for getting it. Some didn't seem to get it.
Turned out to be a nice little mower 👍
You got that right!
@@HomeGaragechannel Also I wanted to reply about the hose fitting clean out on that deck you screw your garden hose on the female fitting turn on the water and start the mower and let it run for a couple minutes when you get done mowing I was amazed by how good that worked
thanks for letting us know. In my testing it only works well used after each and every mow.
Would check compression, valve lash, oil level as you did and once the smoking ceased, then change the oil. You did pretty well with this one, again!!!😀
thanks and that's the plan
Nice fix!
As much as I miss flatheads, these are fine running engines. The jets get plugged easily, but is a simple fix.
Very true! As long as it's used regularly they seem to to work well
@@HomeGaragechannel That's what I been saying for a long time. Start that engine at least once a month (every month) and I've never had a carb issue.
Well, this turned out to be a successful project. If you maintain your equipment it will last years, if not decades. I don't think people will realize that switching to battery electric also requires maintenance like keeping vents clean and maintaining blades and the bottom of the machine. Those machines are also more sensitive to dust than internal combustion engines. People don't realize that even their computers should be cleaned at least twice per year like the refrigerator they probably also neglect.
couldn't have said it better myself!
Your videos are great, you get right to the reason for it, no talking about your animals, the weather or other useless info. Keep up the fantastic work!
Thanks, will do!
a lot of grit in my area , especially in summer when grass dies off . no coating will stand up to this . when i clean the deck after last mowing of the season , i apply paint or oil . i've stopped , or at least slowed rust for a few months .
yes, if the point is to slow the rusting, I agree a coating works well.
I think a more important problem with the shorter spark plug is that the combustion volume is larger. So you get less power from each combustion.
you make a good point
I'd probably change the oil. You're solving level & cleanliness. Doesn't require alot if oil so....👍
Great point!
I do like you did keep searching for where the oil is leaking thank you for the video
no problem
Very nice repair, good job sir! That’s funny regarding the spark plug - I recently picked up a nice Toro SR4 with the Loncin engine and it was running funny / popping / not restarting easily etc. I went to remove the spark plug and noticed it was partially unthreaded, so I re-gapped it and torqued it in. When I pulled the rope it let out a loud backfire and wouldn’t even sputter after that. Pulled out the plug and the gap was slammed shut. Previous owner installed the wrong plug that was too long, then when the piston hit it he must have re-gapped it then only threaded it in part way and went on using it like that! BTW I after fixing it all up I kept that one, it’s an awesome mower with the blade clutch, manuals, bag and mulch plug. Only three years old and got it for a song 😁
wow! Glad to see you decided to keep it.
I figured out what was wrong with the husqvarna 128LD It had Piston scoring that's why it would Not idle And I was only able to get it Running full throttle Like twice But At least i learned something new.
glad you figured out the problem
Smart idea on cutting that choke lever!
As soon as you started it I said to myself “that’s a choke issue not oil overfilled”
I think you might be right!
@@HomeGaragechannel hey that Gardenline mower you had fixed before I just found out where it came from. Aldi’s!! lol
you are correct
Another great informative video. I literally just picked up a craftsman self propelled mower off of the curb this week. It had easily 2 times the required amount of oil in it. Not sure how that happens considering how easy it is to check the dip stick. Either way after cleaning the carb and replacing the air filter and fuel line runs like champ. Thank you for sharing your video.
no problem and thank you for watching
It’s actually pretty easy to overfill these small engines. I’ve gotten many of them free and they smoked from overfilling. I estimate that it takes a little over half a quart to fill. Somewhere between half and 3/4 of a quart. If you put over 3/4 quart, they sometimes will smoke depending on the model.
you are right about that
Check the oil level & probably change it if it's dirty, drain the oil to the correct level meaning that I may as well change the oil.
Run the engine to burn off the excess amount of oil & see that it doesn't keep burning oil once it has warmed up, rebuild the engine if it does !
agreed
The problems started with the sparkplug and thus they tried everything else. I have never seen autolite plugs being used where they didn't cause more problems than the old one.
I see what you're getting at.
If I was flipping mowers, I'd definitely replace the air filter and spark plug with new parts. At least the next owner will get good use out of the mower
Good call!
Great video. My John Deere 14pz could use a good cleaning but I am hesitant to use my power washer on it. You seem to have had no problems even power washing it with the engine cover off!
no problems, just so long as you don't spray directly into the muffler or air filter area, you should be fine
When you first started the lawn mower something did not sound quite right when it was running when you pulled out the spark plug I was surprised that someone could get that wrong of a spark plug and not even compare it to the original one
I know right!
you do you 👍
same
If it's OLD I just run the diesel formula 15/40 and let 'er smoke. Just keep a check on the level and keep it full between changes and YES, I change the oil in smoking stuff too. It didn't ask to not be kept up and I'm sure not holding it against it. Mowed again and 74% left. Still going strong and Happy Mom's Day Yall!
thank you , I totally agree and the same as well!
Amusing seeing you using a pressure washer on it when the deck has a built-in/self-cleaning water sprayer thing with the hose connector still attached
the deck washing system is to be used after each and every mow. It doesn't do anything once the build up has hardened over time. I have a great video showing that very issue. After running the mower for well over 10 minutes, all it did was get the underside "wet" no material is dislodged. Thanks for your time.
Gotta love those easy fixes. Also good idea to trim the choke lever.
I’d check and change the oil. I couldn’t in clear conscience sell something that wasn’t in its best possible condition.
BTW do you set all machines at .005 regardless of manufacturer? Trying to find the specs on all machines is a pain. Setting them at .005 across the board would be much easier.
Cheers
I feel that same as you do!
I.d check the oil level first and start it up and drain it warm and then re-fill to the correct level and besides that she's apples plus any smoke will clear up after a while including a hot too.
you are so right
@@HomeGaragechannel for sure.
Hey bro what's up? My guess is that this mower needed a smoke before it worked hard bro😅😅
LOL!!!
I worked on a mower for a person that had so much oil in it, that the engine was hydro locked. I pulled about a quart and a half of oil out to get to the proper level.
WOW...that was a lot of oil
With the original "High" oil level the owner had, it may have been hydro locking, causing pull cord to be hard to pull...& got better when it leaked out...Just a thought..Nice Find!!
you might be on to something and thank you!
I will try to fix it
good choice
As good of shape as that mower is, it doesn't look like it has a pile of hours. At least, not enough for those valves to be that far out. I wonder if they were messed with already or not set correctly from the factory.
I know right! it was kind of a mystery
When checking oil levels, do you need to place the dip stick just on top or do you screw it in place.
I love your approach to your videos.
Thank you very much
I appreciate it. No, on this Briggs you need to screw the dipstick back in, and then remove it to read the oil level. All the Honda's only have you press the stick in without screwing them in.
It looks like they installed a spark plug for the old flathead Briggs and Stratton engine.
yes they did
Hey home garage. Long time viewer, but I haven't been interacting much because watching your vids have helped me keep my equipment running well lol.
my toro recycler with a briggs motor has been running well but it's not catching the grass, its catching/clumping up in the tunnel. I've clean the inner deck area, sharpen the blade, and cleaned the bag. Can figure why it's not catching the grass.
I see and I think I know what you're talking about. Have wet is the grass when you're cutting it? is there "active" watering for this yard? Also, how much grass are you cutting? If you're cutting 3" or more inches of grass, it might be too much for the blade and deck to handle. Also, how fast are you moving the mower across the yard?
@HomeGaragechannel the grass is not wet, the grass is roughly about 3ins, and I'm going as fast as the self propeller will go. I'll try to go slower and cut more often.
going slower might be helpful. Also have you checked to see how much grass build up is under the deck?
Ill have to try this on my toro. Its getting hard to start and its letting out puffs of smoke when it first starts
good luck with it
@@HomeGaragechannel turned out fine. Lash tested at 0.15mm which is roughly 5 thou and oddly enough even though I didn't adjust anything it fired right up normally this time so who knows. I just cleaned the carb so that shouldn't be it. Oh well I mowed 3 yards today where it got some use and it fired up perfect every time
glad to see it working again
Good job fixing and one question. Is that adapter all one piece for blade/pully or are they separate?
on this model it's one piece.
Recently I was working on a mower and I had trouble getting it to start on the first pull when cold. It was a Briggs engine like this mower has. I cleaned the carburetor, adjusted the valves to 5 thousandths and changed the oil but it still takes about 5 pulls to start cold. What do you think could be the issue?
sure, did you confirm that the choke was working like it supposed to? Also, did you make sure the O-ring was on the back of the carb when it was installed? The last one, is, did you do a compression test?
@@HomeGaragechannel I did check the choke and it seemed to be working correctly as it was closed when the engine was cool. I also made sure the o ring was on the carb. I didn't do a compression test though, the engine runs normal after it starts and when hot it re-starts on the first pull
well 2 out of 3 isn't bad. If the compression is fine, then the carb is the issue.
Not having the right spark plug, and the vows not being adjusted was the reason I think it was smoking.
I think you're right
Hi ,my lawn mover when stop the blade saking please show me how to fix Thanks
I'm guessing that you're saying that when stop your mower.. the blade is "shaking"? If so have you checked to see if the bolt for the blade is loose? Also have you checked to see if the blade is the correct one for the adaptor?
I would check the oil level first. I have seen what happens to a mower engine when a short reach plug is used for a long time. Makes it harder to install the right plug.
great choice
Do all carburetors have an adjustment screw? My Blackmax weed eater has a barrel carburetor and for the life of me I can’t seem to find the adjustment screws on it.
most of the older ones have 2 screws, some only the one. The ones that have the "barrel" types of carbs, like on echos, have 2 but they're hidden. And a few of them, have none what so ever. On the barrel types, the only screw is the L screw And it's in the middle of the barrel on top, where the brass part is. use a flash light to help see it. You'll need a tiny flathead to turn it.
Question: I bought a compression tester from Temu but the readings for two good two stroke blowers was way too low. I think the tester is faulty. I noticed the one you listed on this page was only $13 on Amazon. Do you trust the readings? It doesn't seem to have a Shrader valve attachment. Is one needed for two and four stroke engines?
The piece that sticks out of the metal part is the relief for the Schrader valve. Sometimes you get a bad one. If so, send it back.
I'm working on a toro recycler with a crappy Kohler engine (I hate those 😂) and the tall mounted screws along with the bolts holding the engine shroud are all bent and stripped and no matter what I try, i cannot get the cover off. Any advice?
you mean the 3 nuts and studs that holds the recoil and the cover on? Not sure what I would do since I've never had to deal with that situation before. I guess, I'd drill out the stud with a drill bit a hair bigger than the stud. unfortunately this will mean you'll have to replace all the damaged studs and nuts.
@HomeGaragechannel yes, thank you! This is my first time having this issue also. I did try that and had no luck. It's driving me crazy because I have no way of getting to the engine until I can get this dang cover off.
sorry to hear that. There's not much else left to try
@@HomeGaragechannel it's ok. That's what I was afraid of
hay what do you think about running mower with propane
it's "Iffy". When you try the conversion yourself, you'll understand why I say that. As for using propane vs. gasoline, I don't know if it's any better, cleaner, or if it's any cheaper. This might be a good video idea, Propane vs gasoline.
What app are you using to find lawn mowers?
I'm using Craigslist and FB marketplace
Have you ever experienced a 2 stroke runaway?
no, how does that happen? The extra Air would have to make it thru the carb, to be able to get fuel.
10:38 Question could you also use motor oil to lubricate them?
it's your choice, and yes it'll work, but I would not personally use engine OIL
@@HomeGaragechannel What do you use to lubricate them
I use, lithium grease right now. It's not as thick as oil.
@@HomeGaragechannel Where can I get lithium grease
from any autocrats store.
What kind of product to clean were you using i would like to purchase one ?
I use a degreaser from Harbor Freight, and a paint sprayer using water.
@@HomeGaragechannel is there a specific brand to the spray or is it made and only sold at harbor freight. Because i dont have a harbor freight!
no, almost any "degreaser" will work fine.
My new Honda mower smokes black smoke when I restart it after emptying the catcher. Why does it do that?
it's the choke. It's still working even when your engine is hot.
@@HomeGaragechannel is that good or bad?
it depends, how long is it blowing black smoke out? 2 seconds or 2 minutes?
@@HomeGaragechannel 2 seconds
then it's fine.
i have a question
how do you get rid of water in your gas?
I pour the gasoline into a glass jar and siphon out only the gasoline leaving the water behind. You can also do it the other way. Siphon out the water at the bottom leaving the fuel behind
@@HomeGaragechannel thank you i have a 12 year old murry lawn mower and it has water in the gas i will try it
i still find it funny that my neighbor gave me a free mower
also do you have discord?
some people have no issue with giving stuff away.
The worst thing for most machinery is...... an uneducated user. If the owner watched a few of your videos, this mower would be in proper use for years. Thanks, and smoking is bad for your health . The mosquitoes can smoke all they want.
very true
I have seen more mowers overfilled with oil than low. Not everyone has your mechanical ability, but literally anyone can add oil to a mower.
well said
what is the app!!!!!!!!
i neeeeeeeeeeeeeeeeeeed it
sure I use Craigslist and FB marketplace
@@HomeGaragechannel thx (:
i do lawn mower and weed eater repairs to it's just I don't do a UA-cam channel type thing thank you
i'm 12 btw lol
i have been watching your vids for 6 years now
that's cool
Hi, any business email ?
homegaragemail@gmail.com