Josh! You saved another Josh here with this video! Thank you for explaining the little issues you had along the way. I just installed these in my 19 ZL1 last night and man everything that could go wrong went wrong. Broke the corner off the mounting bracket for the driver side rear bumper... broke the long middle clip off with the plastic welds... not alot of force was used. Struggled with the tail light harness release and 3rd brake release until I found your video. You were a life saver man thank you for sharing the little things! Beautiful car brother!
Got myself a 2022 4L 2.0 turbo vivid orange metallic camaro, am thinking of making a channel for it as i begin to customize it. I am really loving your maro and how you've customized it. Keep up the great work
How do you get your lights to do those different motions when you're not inside it? Also is there a setting so the middle rear brake light will also sequence?
You can add a 12v option, where it comes with a push button that can be pressed to do a pattern while not in it, the brake light is an aftermarket product from Seequenced LLC. I have a discount code in my instagram bio
Thanks man! AWE is holding up nicely. I really don’t notice any drone with mine. A few people say they have drone and others say they don’t, guess it’s just luck
I assume you fixed this already, but as a comment for anyone that has this issue: it occurs when you disconnect the wiring harness (drivers side of the rear bumper) with the battery still connected. To fix it, disconnect the battery, reconnect the harness in the rear bumper, then reconnect the battery and it should be fixed. You can avoid the whole issue by being careful when removing the rear bumper, just set it under the rear crash bar instead of completely removing the bumper and don’t disconnect the wiring harnesses
Ended up running both ends down to the right where the harness goes from trunk lid to inside of trunk. Ran the left side up and along the inside of the top of the trunk to the left side. The wires for both lights that plug into the red wires ran a portion over the seal and up into the trunk liner to hide the connections. So in the end the only visible part is the 1 inch of exposed wire coming from the taillight and into the liner. Not much can be done with that
I noticed my check marks (I guess you could call them that) are not lighting up until its darker out so unless I push the brake pedal, during the day there are no lights on the back and no red reflectors. I think the original tail lights were lit all the time if the car was on. They come on if you put the marker lights on manually but otherwise not until it gets dark enough to trigger the headlights to come on. Anybody else notice this?
@@JCSCUSTOMS that ended up being the case for me too. On another note, do you notice the turn signals coming on when braking? I was in front of a store that had large windows so I looked in my rearview to see how my tail lights looked and I noticed the turn signal was on too, although I couldn't reproduce it when I came out of the store. I was watching a video about Tesla model 3 after market taillights and the same thing happened. The guy in the video thought this was only for US spec'd cars so that could be the issue (if I can get it to happen again). On a side note, I saw these taillights on Ali express but for about $100 more than Auto Addicts sells them for. I'm hoping these didn't come from there as well🤞
Awesome! I got quoted for it when they first announced preorder for the service, since I already had my lights installed for a few months. I was quoted more than what I paid for the lights so at the time I didn’t do it. But may be something I check back into in the future. If they sold just the drl boards I would do it myself
JcS what's up buddy remember me I purchase the same ones from the same place I install them I noticed when you were backing up when you were stepping on the brakes turning single light should not be on when you are pushing the brakes just FYI. did you connect the connector underneath the tail lights I know you don't want to take out the bumper again, but it seems like you forgot to connect because again you're single lights are turning lights should not turn on whatsoever when you are backing up only the reverse light should be on and I don't think you're brake lights are turning on when you push the brakes please check you got my email if you have any questions. Thanks again your friend robert
I noticed my check marks (I guess you could call them that) are not lighting up until its darker out so unless I push the brake pedal, during the day there are no lights on the back and no red reflectors. I think the original tail lights were lit all the time if the car was on. The checkmarks do come on if you turn on the marker lights manually but otherwise not until it gets dark enough to trigger the headlights to come on. Anybody else notice this?
Ain’t gon lie im more of a fan of the original taillights but these are fire non the less
I didnt know Morgan Wallen owned a camaro
I get this comment often😂
This video was the best explanation I’ve seen of how to install these lights 👏
Glad I could help!
Josh! You saved another Josh here with this video! Thank you for explaining the little issues you had along the way. I just installed these in my 19 ZL1 last night and man everything that could go wrong went wrong. Broke the corner off the mounting bracket for the driver side rear bumper... broke the long middle clip off with the plastic welds... not alot of force was used. Struggled with the tail light harness release and 3rd brake release until I found your video. You were a life saver man thank you for sharing the little things! Beautiful car brother!
Ahh man hate to hear that! But glad I could help!
Keep crushing it ! Well deserved!! They look amazing !!
Thanks! Awesome product! Will do!
Dude these look doppeee. Appreciate the side by side with the stock lights. That made it a deal for me
No problem man! I love them, get a lot of compliments
Great video!! Mine will be here on Monday, can't wait to install them!!
Thanks! You’ll love them!
Where is the video of the rear bumper removal? Couldn’t seem to find it on your channel
I step through it in this video
ua-cam.com/video/1VG6Rurq3Cw/v-deo.html
Got myself a 2022 4L 2.0 turbo vivid orange metallic camaro, am thinking of making a channel for it as i begin to customize it. I am really loving your maro and how you've customized it. Keep up the great work
Nice! Thanks! Will do!
I think you should start ☝🏾
How do you get your lights to do those different motions when you're not inside it? Also is there a setting so the middle rear brake light will also sequence?
You can add a 12v option, where it comes with a push button that can be pressed to do a pattern while not in it, the brake light is an aftermarket product from Seequenced LLC. I have a discount code in my instagram bio
Nice man is that the Anderson composite diffuser?? Did you buy it in stock somewhere? Everywhere I look is sold out special order
Thanks! No it’s the ikon 3 piece
What size are the screws for the tailight brackets
I agree with not liking dropping the bumper. I don’t know why GM did that. Just want to give hard time to their customers.
Kind of unbelievable they haven’t made a pre-refresh taillight swap for the refresh.
Yesirrr ur the reason I went from a v6 Camaro to a v8 camaro
Nice!
13:19 do you have problems with that lag when you reverse? Or does it no longer do that? I saw that one brake light turned on and the other didn't.
It no longer does that!
Hi, how did you manage to make the third stop like this? Thank you
The brake light pattern is a custom pattern done by Seequenced LLC, the name on the brakelight is vinyl from my website
🔥🔥 quick question tho, where did u get the diffuser from?
It’s the 3 piece gloss black diffuser from next Gen speed!
What are you going to do with your old lights? I'll buy them, my passenger side went out
Been waiting on this video for months man. They look awesome. How is the AWE track exhaust treating you? Any bad drone?
Thanks man! AWE is holding up nicely. I really don’t notice any drone with mine. A few people say they have drone and others say they don’t, guess it’s just luck
Hey man. Did you have any issues with the back up camera after the install?
Mine is a blue screen. All connections and fuses are good.
Hey man, hate to hear that, no mine has been working like normal
I assume you fixed this already, but as a comment for anyone that has this issue: it occurs when you disconnect the wiring harness (drivers side of the rear bumper) with the battery still connected. To fix it, disconnect the battery, reconnect the harness in the rear bumper, then reconnect the battery and it should be fixed.
You can avoid the whole issue by being careful when removing the rear bumper, just set it under the rear crash bar instead of completely removing the bumper and don’t disconnect the wiring harnesses
How’d you get that middle brake light to do that little dance it does ?
I think he said his middle break light was aftermarket but not sure
Aftermarket from Seequenced LLC. However the company uses OEM lights and modifies them. I have a discount code in my Instagram bio!
Looks good man, great install video
Thanks man!🔥
I've got rock guards installed on the rear wheel-well. Any work around for this to drop the bumper and access the wiring harness?
Stock or aftermarket?
can this model still work on a 2017?
It will not but there are some that will
Where did you run the red wires that connect to the 3rd brake light to keep them from showing?
Ended up running both ends down to the right where the harness goes from trunk lid to inside of trunk. Ran the left side up and along the inside of the top of the trunk to the left side. The wires for both lights that plug into the red wires ran a portion over the seal and up into the trunk liner to hide the connections. So in the end the only visible part is the 1 inch of exposed wire coming from the taillight and into the liner. Not much can be done with that
I noticed my check marks (I guess you could call them that) are not lighting up until its darker out so unless I push the brake pedal, during the day there are no lights on the back and no red reflectors. I think the original tail lights were lit all the time if the car was on. They come on if you put the marker lights on manually but otherwise not until it gets dark enough to trigger the headlights to come on. Anybody else notice this?
Mine seem to be on. Super super dim though. Can’t tell they are on unless really looking for it
@@JCSCUSTOMS that ended up being the case for me too. On another note, do you notice the turn signals coming on when braking? I was in front of a store that had large windows so I looked in my rearview to see how my tail lights looked and I noticed the turn signal was on too, although I couldn't reproduce it when I came out of the store. I was watching a video about Tesla model 3 after market taillights and the same thing happened. The guy in the video thought this was only for US spec'd cars so that could be the issue (if I can get it to happen again). On a side note, I saw these taillights on Ali express but for about $100 more than Auto Addicts sells them for. I'm hoping these didn't come from there as well🤞
Just got my RBG ones today.
Awesome! I got quoted for it when they first announced preorder for the service, since I already had my lights installed for a few months. I was quoted more than what I paid for the lights so at the time I didn’t do it. But may be something I check back into in the future. If they sold just the drl boards I would do it myself
thinking abt getting this for my 2020 rs, dont know if i should tho ⁉️
Really like mine so far!
I got mines last week for my 22.. I’m going do my install video next week you are the 1st 🔥🔥🔥video bro.. help me when I do mines next week 🧡🖤🧡
Nice! Let me know if you need any help!🔥
Those looks sick Josh heck yeah 😃😃
Thanks man🔥
@@JCSCUSTOMS Yeah the only reason I am not taillight swapping is cuz of the bumper! Nope haha
@@gainzbrehhhmotorsportz309 I think only the 2019+ have to remove the bumper
@@JCSCUSTOMS Ohhhh! But I’m glad ya got it done! Looked great with the orange and the WANGGG
@@gainzbrehhhmotorsportz309 haha thanks man🔥
Another great video, we need more videos with yr fiancé in them,,, thanks,,
Thanks! I’ll try! She doesn’t care to be on camera much
JcS what's up buddy remember me I purchase the same ones from the same place I install them I noticed when you were backing up when you were stepping on the brakes turning single light should not be on when you are pushing the brakes just FYI. did you connect the connector underneath the tail lights I know you don't want to take out the bumper again, but it seems like you forgot to connect because again you're single lights are turning lights should not turn on whatsoever when you are backing up only the reverse light should be on and I don't think you're brake lights are turning on when you push the brakes please check you got my email if you have any questions. Thanks again your friend robert
Hey man, yeah I remember! So the turn signals were on because I put my blinkers on while in reverse! Everything works great!
@@JCSCUSTOMS ok didnt know well thats great than
oh almost forgot where did u hide the resistor the one that gets hot because when it rains water gos thu the inside near the wires
@@ET-fm6mp I ended up putting it underneath the little plastic bracket thing under the light where the GM harness plug is
ok cool
broooo those are 🔥
Thanks man, I love them!🔥
Looks really nice
Thanks!🔥
seems like your working in the dark
Dot Sae?
Yes
I noticed my check marks (I guess you could call them that) are not lighting up until its darker out so unless I push the brake pedal, during the day there are no lights on the back and no red reflectors. I think the original tail lights were lit all the time if the car was on. The checkmarks do come on if you turn on the marker lights manually but otherwise not until it gets dark enough to trigger the headlights to come on. Anybody else notice this?