Hello! I watched the video with great interest, because my Cagiva River has the same problem - a crumb magnet. For a long time looking for a way out of the situation, there were all sorts of options to do. Everything sticks to the problem - money, money .... Now I think whether to send those rings to you, but I don't know if I will be able to do it at home, it is also difficult to find a good master in Latvia. Now just a financial issue and think it will send you this rotor. Thanks for the idea!
@@uldisermansons We already can now supply new replacement FP8315 flywheels, hopefully in the next month or so we should have new replacement FP8313s available to. But for now we can only do a modification to OE flywheels.
Maybe you are the guy I should ask, the regular shop guys seemed too frightened to limb it :D I´m coming from Briggs & Stratton/Honda utility style 4 strokes, chainsaw/trimmer style 2-strokes, but I have never stuck my toes in bikes. I now have a late 1950´s clenodium 4 stroke 7-10 HP single cyl with a motorcycle/moped style 1-row multi magnet flywheel, ignition coil, power coil and breaker point ignition system on a separate lobe axle 1/2 gear ratioed between lobe and crank. (Its called a Westerbeke Universal engine nr 10... No documentations to be had from neither the engine manufacturer nor on the Bosch ignition numbers, it´s too old) My ignition part numbers gives me related matches in older Vespa´s and others. Engine is good, the breaker is shot. I cant seem to find a new one alike so I figure to go conversion to modern breaker free for less hazzle, just replacing the entire system, magnets and all, adapt to fit to my main mass flywheel. I dont know anything about bike standards and the MC shops just keep listing up fitting bikes on their parts and I have not found anything in my fresh dive about industry standardisations of geometrics. My original flywheel magnets inner diameter is 98mm+ slight tolerance for the original coils. What bike model parts of today could fit for this ? Magnet ring nr LM/US1/138/12/6 Coil base plate nr ZPT 327Z 332 Z
@@douglaseames4922 The one piece magnet that I use in this modification has a different wall thickness than the OE magnets have, hence why a steel insert has to be fitted. I'm guessing that the flywheel fitted to your ZN is made by Kokusan? I have tried for years to source these OE magnets without any luck. I do supply new replacement flywheels for the early 1980s Z/GPZ 1000S and 1100s but I don't know if the ZN models have the same rotor fitted?
I ordered a rotor with magnets on eBay for my bike, but there must be away to replace the old magnets in the flywheel rotor on a 1984/84 kawasaki zn1100b. Thank you for the reply.@@bbbikeshop8359
Hello, great video. I have a dt230 lanza and the 4 90° magnets got destroyed. Is there somewhere that I can order replacement magnets or can you fix it? Inside diameter of the magnets is 98mm and outer 108mm.
Yes, it can be done on the SM610 as long as the ignition system on that bike is Kokusan Denki, the price is on our website at the same price for the Cagiva Canyon models here www.bbbikeshop.co.uk/details/ppB1KC_22041480.aspx or a DIY kit here www.bbbikeshop.co.uk/details/ppB1KC_22041467.aspx
Hi, usually I supply new replacement flywheels for these, but unfortunately at the moment I do not have stock, hopefully I shall have some back in stock by the end of January? I don't do a repair on those, sorry.
Bonjour, Superbe tuto et cela explique beaucoup de chose sur les problèmes de la Cagiva W16, problème que doit avoir sur la mienne. Si j'ai une question a poser, c'est de savoir quel est la référence du moteur Cagiva W16 et quelle autre marque de moto possède ce moteur. Merci d'avance. Laurent.
I wrote you on facebook Can you repair also cagiva mito kokusan flywheels Fp5231? There are very similar to cagiva canyon flywheel They have the same magnet circle system
Si prega di visitare il mio sito web www.bbbikeshop.co.uk troverete i dettagli dell'indirizzo in "Termini e condizioni" Please vistit my website www.bbbikeshop.co.uk you will find the address details under "Terms and Conditions"
It works! Rode my W16 about 15 000 km up to now. No problems. BB Bikeshop made a good job. Greetings from Germany !
Glad to hear that it is all working well, thank you for your feedback.
Hello! I watched the video with great interest, because my Cagiva River has the same problem - a crumb magnet. For a long time looking for a way out of the situation, there were all sorts of options to do. Everything sticks to the problem - money, money .... Now I think whether to send those rings to you, but I don't know if I will be able to do it at home, it is also difficult to find a good master in Latvia. Now just a financial issue and think it will send you this rotor. Thanks for the idea!
What is the part number on your flywheel? Should start with "FP"
@@bbbikeshop8359 8313
@@uldisermansons We already can now supply new replacement FP8315 flywheels, hopefully in the next month or so we should have new replacement FP8313s available to. But for now we can only do a modification to OE flywheels.
Maybe you are the guy I should ask, the regular shop guys seemed too frightened to limb it :D
I´m coming from Briggs & Stratton/Honda utility style 4 strokes, chainsaw/trimmer style 2-strokes, but I have never stuck my toes in bikes. I now have a late 1950´s clenodium 4 stroke 7-10 HP single cyl with a motorcycle/moped style 1-row multi magnet flywheel, ignition coil, power coil and breaker point ignition system on a separate lobe axle 1/2 gear ratioed between lobe and crank.
(Its called a Westerbeke Universal engine nr 10... No documentations to be had from neither the engine manufacturer nor on the Bosch ignition numbers, it´s too old)
My ignition part numbers gives me related matches in older Vespa´s and others.
Engine is good, the breaker is shot. I cant seem to find a new one alike so I figure to go conversion to modern breaker free for less hazzle, just replacing the entire system, magnets and all, adapt to fit to my main mass flywheel.
I dont know anything about bike standards and the MC shops just keep listing up fitting bikes on their parts and I have not found anything in my fresh dive about industry standardisations of geometrics.
My original flywheel magnets inner diameter is 98mm+ slight tolerance for the original coils. What bike model parts of today could fit for this ?
Magnet ring nr LM/US1/138/12/6
Coil base plate nr ZPT 327Z 332 Z
Where do I get replacement magnets for a flywheel rotor on a 1984/85 kawasaki ZN1100b? Should I install them myself of glue them on the rotor?
Sorry, but I have no idea where to get magnets for that flywheel rotor.
Thank you for the reply, but there must be a supplier in USA for replacement magnets to glue in on my rotor.
@@douglaseames4922 The one piece magnet that I use in this modification has a different wall thickness than the OE magnets have, hence why a steel insert has to be fitted. I'm guessing that the flywheel fitted to your ZN is made by Kokusan? I have tried for years to source these OE magnets without any luck. I do supply new replacement flywheels for the early 1980s Z/GPZ 1000S and 1100s but I don't know if the ZN models have the same rotor fitted?
I ordered a rotor with magnets on eBay for my bike, but there must be away to replace the old magnets in the flywheel rotor on a 1984/84 kawasaki zn1100b. Thank you for the reply.@@bbbikeshop8359
Hello, great video. I have a dt230 lanza and the 4 90° magnets got destroyed. Is there somewhere that I can order replacement magnets or can you fix it? Inside diameter of the magnets is 98mm and outer 108mm.
Sorry, I can't help with this size of magnet ring.
ive just put mine back together i have no spark ,going to try another magneto
Great job I'll get one sent up what price is this service in UK
If you send an email to info@bbbikesho.co.uk with the same request I will let you know.
Is delivery free
Is this something that could be done to a 06 Husqvarna sm610? And what is the cost of a job like this?
Yes, it can be done on the SM610 as long as the ignition system on that bike is Kokusan Denki, the price is on our website at the same price for the Cagiva Canyon models here www.bbbikeshop.co.uk/details/ppB1KC_22041480.aspx or a DIY kit here www.bbbikeshop.co.uk/details/ppB1KC_22041467.aspx
Hi gd day... How about kawasaki kle 500 flywheel do you repair it?
Hi, usually I supply new replacement flywheels for these, but unfortunately at the moment I do not have stock, hopefully I shall have some back in stock by the end of January? I don't do a repair on those, sorry.
Back in stock now. www.bbbikeshop.co.uk/details/ppB1KC_21638305.aspx
Teria o magneto mas estator da w16 cagiva 600 e motor de partida
Entre em contato comigo pelo e-mail info@bbbikeshop.co.uk
How much is the wall thickness of the steel/magnet ring?
Sorry for the late reply, just noticed your question. It's 3mm for the magnet ring and approx 6mm for the steel ring.
My 1998 Suzuki RMX 250 6 magnet came out ..Can you help?
Sorry, unfortunately I cannot help you.
Can u repair 1987 kdx rotor flywheel magnet?
KDX what cc?
Where can you get those magnet rings?
They are made in China, I get them from a company here in the UK and I cannot disclose who from. Sorry.
Hello mate, I’ve got a 1993 yz250 and the magnets are all smashed inside the flywheel, is this something you could replace for me? Thanks
Sorry, but unfortunately I cannot get the magnets for this size of flywheel.
@@bbbikeshop8359 ok thanks the flywheel is 100mm wide if that helps
No need to balance?
I have done several dozen of these and so far there has been no need to balance.
Bonjour, Superbe tuto et cela explique beaucoup de chose sur les problèmes de la Cagiva W16, problème que doit avoir sur la mienne. Si j'ai une question a poser, c'est de savoir quel est la référence du moteur Cagiva W16 et quelle autre marque de moto possède ce moteur. Merci d'avance. Laurent.
Merci. Je ne sais pas quelles autres motos ont le même moteur, désolé.
I wrote you on facebook
Can you repair also cagiva mito kokusan flywheels Fp5231?
There are very similar to cagiva canyon flywheel
They have the same magnet circle system
Not sure? I think the Mito flywheels are smaller, can you send some photos? info@bbbikeshop.co.uk
mi potreste contattare , per avere l'indirizzo , vostro a cui mandare in america?
Si prega di visitare il mio sito web www.bbbikeshop.co.uk troverete i dettagli dell'indirizzo in "Termini e condizioni"
Please vistit my website www.bbbikeshop.co.uk you will find the address details under "Terms and Conditions"
Ciao amico del america , se ti spedisco il volano , pagando ovvio, mi rifaresti il volano che hai fatto vedere in video?
Sì, nessun problema. Yes, no problem at all.
Hi! How to reach u?
Check out my website www.bbbikeshop.co.uk
How much costs that flywheel machine?
www.bbbikeshop.co.uk/details/ppB1KC_22041480.aspx
Also a DIY kit here www.bbbikeshop.co.uk/Cagiva_CanyonW16_T4_Rotor_Repair_Kit/ppB1KC_22041467.aspx
fachowiec.precyzi.