5" Micro Drone...Wait, WHAT?? 😳 Propellers TOO BIG for Quadcopter Frame
Вставка
- Опубліковано 2 сер 2024
- You can now support RCwithAdam (and gain special perks!) HERE: ko-fi.com/rcwithadam 🤗
Visit my website here: rcwithadam.com/ 💻
Only have a minute? Skip to 11:05 for a super sweet B-roll flight sequence!
Don't try this at home Time for Adam to try another one of his ridiculous ideas!! Let's see if we can cram the electronics of a 5" sized FPV drone into a 3" size quadcopter frame... and still fly it!
3D Printed Propeller Hub Part II • 3D Printed Propeller H...
COMMENT BELOW what you learned from this video!
👉UPDATE 4.22.20: HERE ARE LINKS to the TinkerCAD designs for the motor adapters, in case you're interested!
Tall adapter www.tinkercad.com/things/fmdu...
Short adapter: www.tinkercad.com/things/5ch9...
NOTE: This design is not perfect, and if I were to use them again I would make a few changes to give the holes extra wall thickness.
This is the filament I used for the 3D prints amzn.to/35pqJxc
*SAFETY NOTE: for the close-up shots of the quad flying, I made sure to where safety glasses to protect my eyes in case something unexpected was to happen. Be prepared!
#microdrone #makersgonnamake
Support RCwithAdam by purchasing through these links!
Amazon amzn.to/2FHjkwI
Banggood www.banggood.com/custlink/Kvm...
I have a website rcwithadam.com/
-------
RC with Adam GEAR
RADIO: amzn.to/2osIur0 www.banggood.com/custlink/3Kv...
QUAD RECEIVER: amzn.to/2CsvX0C www.banggood.com/custlink/v3v...
AIRPLANE RECEIVER: amzn.to/2OBIqnj www.banggood.com/custlink/GG3...
QUAD PROPS (my fav) amzn.to/2DywVXA www.banggood.com/custlink/GGK...
RC with Adam FILMING GEAR
Main camera amzn.to/2pGZA4L
Action Camera amzn.to/3dVW6DE
Mic amzn.to/2OKoCOB
Camera stand amzn.to/2C4I3uX
--------
Mandatory Disclaimer:
I participate in the Amazon Affiliates program, which means that if you click on one of the above Amazon links and purchase a product on Amazon, I will receive a teeny tiny commission (at no additional cost to you). Also, various other links listed here may be affiliate links, to which this disclaimer also applies.
*REMEMBER, always use caution and your best judgement when building and flying RC aircraft, be a good neighbor, and HAVE FUN!*
-----------
About RC with Adam: Adam makes FUN and HELPFUL videos about Radio Controlled aircraft, tech, and DIY projects! #RCwithAdam - Наука та технологія
You were visited by “Puff” the magic dragon. 😂
@ 11:19 you can see magic smoke , esc was warning ⚠️ you of catastrophe failure
great observation
thats awesome Smoke hahhaha LOL
Great to see this hobby expanding into such wild ideas, never know what the next thing will be!
Also, 11:18 is that magic smoke?
You watch Davey 504 dont you? Slapped like for that.
*o m g*
Seems like a buncha people do here. Lol.
Do it now
this puts a smile on my face
SLAPP that BASS!
The screw melted cuz it shorted the esc through the screw to the frame, a 30sec fire could not melt that screw.
I think you're right!
Makes sense to me. I don’t think it would melt that fast either but lipo fires are hot.
Yeah but if you short a lipo battery with anything metal which has a smal diameter it will melt acting like a fuse
The current paddy trough the screw melted it not the fire
Actually basic electronics here
Sorry for bad English I’m Italian 15 yo
Edit:paddy=passing sorry
yep that was my observation too, shorting to the carbon, had this happen early on in my FPV experience, crazy how the screw melted lol
I mean jet fuels can melt steel pillars
13:26 The Rocket Take off almost LOL. great work dude, keep it up. :D thats some good work there. Wish I was living at a great green natural place like you do. and I could fly FPV All day long
Thanks, will do!
I did this with 4" props on a 3" inverted frame analogue build. Flight time of 30mins with a 1550mah lipo. (Providing you don't screw the bollocks off it and fly without the extra weight of a gopro). No fires so far and goes like a rocket.
Wow. 30 min? no way!
I don't think that cooling was at the root of your combustability issue. I think something got bridged. Hard to believe it got hot enough to melt components, but maybe so
The board probably bridged to the carbon fiber
when it caught fire your face was incredible ahah
great vid!
Good job man 👍go ahead 🤞🤞🤞 we learn from you mate👍❤️
I love this! I've managed to force 4" on a 3" frame before. Glad you found a way to make it happen! Now strap a Gopro on it, superlite cine quad LOL
That was a realy fun video to watch... I enjoyed the project and the video. I love it when people experiment with what's possible with drone and make us rethink the standard drone. I have seen some videos of 12s quads. Imagine one this size this on 12s, that would be insane.
I did this with a 2.5 inch frame and I am now running 3 inch props. It fly’s amazing
13:38 “let’s fire this thing up”
Oh man, that choice of words
I think that this is actually not a bad idea; i would try and get a slightly bigger frame where the props wont get superposed (but very close though), and definitely a better rated ESC, and a bunch of standoffs/spacers.. . Good stuff.
hahahaha "That went super goooood..." too funny
Let me know what YOU learned from this video!
Remember, we learn more from our failures than our successes. 😉 👍
Psst! Did you notice the magic smoke being sucked back into the quad at 11:19?
I always wondered if this was possible. Thanks for trying it out. Now I know it's possible.
Just saw the magic smoke. So that was the last time it took off and flew?
Yeah lol
You should make a frame with proper specs so the clearances and cooling are right. I love the offset motors and giant props.
I saw a couple videos on charging batteries and fireproof bunkers. I had an idea from that about using one of those metal wagons to hold the bunker and also put out a fire when charging. Fire extinguisher and sand reserviors would all be in a mobile dohicky. The original idea was so if you got a fire you could quickly move the fire outside so it wouldnt get your house. BUT, your situation in this video, gave me an idea! Take the wagon with you when you fly and you have a mobile fire extinguisher.
Its like carrying a gun. You do it in hopes of never needing it, but if you need it nothing else would work. I wonder how many pilots carry sand with them when they fly? Dude, you got my mind spinnin. Keep it up man. SUB!
Yeep I was gonna comment this lol
What a genius work, I liked it, it was a pity, it burned, I liked it even made me laugh 😅👍👌
Good job I love your cinematography and editing ...beautiful filming ....Cheers
Killer concept bro, and even cooler it flew, too bad it caught fire . Pretty sweet project.
Enjoyable. Thanks
what receiver is installed in the drone in the video
i like your vids been waiting for another cool experiment.
Well...what!!! that's cool!
Glad you had sand! Whew! The fire is just the afterburners!
One of the best FPV videos i saw in the last years. Very entertaining 👍👍👌👌🤣🤣 Many greetings from Germany 🇩🇪
Wow, thanks! 😁
I told you!! Make a flying wing lol!
Hahahah great reaction by the way Hahaha
RIP:drone
Can you update the parts to the budget brasher I’m thinking about building it and a lot of things on the amazon list are unavailable
You can literally see the motors smoking before the fire at 11:18
I don't think that's smoke, that's just a piece of string stuck to the back left motor. The short occurred rapidly, presumably the positive shorting to ground. You can see it's desoldered after the fact.
@@jpsalis look at 11:19 (the next scene)
@@ivansimic1878 I see that now, that's really weird, I think that's coming from the FC though.
@@jpsalis yeah it's weird... i don't know how he didn't saw that before it was late...
@@ivansimic1878 Usually it's a much more immediate smoke-out, the fact that it took so long is a bit bizzare, and that smoke was very subtle, I assume he had at least 1 flight after this takeoff before it finally gave up. That was the FC smoking, probably some capacitor or something, not the battery.
0:40 Look at this dude, oh, nonono.. AhahahahaHba Look at its props! Aaaa, are you kidding?
What size motors is on the 3 inch originally
At least you got some flying time out of it and it is possible to do.
Really like the way you created this video - love your style, very entertaining 😊
Thank you! 😁
Totally saw the puff of smoke once armed. Even before the motors started spinning up. You were sooooo close!!! I'd really like to see you pull this off. Just sub'd. 👍👍
😁👍 thank you!
Just bumped into your channel 😁 so happy I did lioe the content my man ❤️ keep up the sick edits my dude
Hi! Thanks so much! I really appreciate the feedback and glad you enjoy it! 👍😁👍
That was cool🔥🚀
Thanks! 😉
I like those sick beat! Lol that drum dude should make music for your videos lol!
If screws touch the windings on the bottom of the motor it will get hot and fry. Or if your solder joints are bad on the esc it will do the same. Fun project by the way
i think you should continue this venture .. surely just a mishap that could be avoided v2
What a great video
All of you’re work for a fire!! 😖 Would’ve been awesome to c some FPV though! I thought the B roll made it a lot better tho for sure. Keep it up & can’t wait to c the nxt awesome vid! 💪😎👍
I know! But you can bet I won't make that mistake again!🤞Thank you!
I always wanted to make an x clad out of 2 yard sticks crossed.
Liked and subscribed bro. I like your style... very impressed
i love fun videos like this. haha, good job!
also, like a true youtuber, giving the audience a view of the fire. awesome!
Thanks! Glad you enjoyed! 🙌😃
Very cool video, made a subscriber on the first video I have seen.
I love that you just use tinkercad for the design work.
I use the cmag sheets for printing surface for the Ender. Very good hold if you keep it clean.
THANK YOU! 👍 😁 and good tip.
The new beta flight is amazing
Que trabalho de génio, gostei, foi pena, arder, gostei até me fez rir 😅👍👌
Perfect music in background 👍👍
DNB rules 😊
Thanks ✌️
Sick build dude !! You need new goggles and def the positive melted off and shorted with the frame. GLhf on the next one I fed want to see a 2nd video to this looks like a nice racing platform 3-4 inch first of its kind I think 🧐
Finally some interesting content....
inspirational
Thanks for doing this for me XD
Love it
I'd definitely think twice about using that motor without rewiring it first because it looks like the enamel would have been melted in the fire and on top of that it might have been the reason fpr the fire in the first place but that's just my personal opinion.
Lol too late! But You're right. I already used them in my latest project! 😜
I keep a holy picture of sir Bardwell in my drone case, to bless all FPV sessions.
Anyways, really nice video dude, I really like the drone b roll footage you made also the video was fuun 🤣😂 I saw a little strain of smoke at 11:17 coming from the drone 😂🔥
Lol Thanks! Good eye!
since i dont have a 3d printer can you put 2 motors on top and 2 on bottom (uderside)?
also wierd water you got over there lol
Yes, I think that would work. 😁
Don’t you think the air flow of the propeller will interference in this configuration?
Wouldn’t the overlap with the props cause massive prop wash.
Awesome bro...8 do the same thing...modify and try new stuff.
0:46 wise choice
13:53 nice water
lol yeah...
Muito bom top
Hey i wanna ask what are the benefits of color prop distinguished one?
Hi! I'm not sure what you mean. 🤔
@@RCwithAdam1 you know a lot of fpv player like steele that the 1 prop of 4 prop is different 1
Ohhhh I didn't know that. I could see it being useful for line of sight flying to maintain orientation, but not sure for fpv.
Wouldn't hurt to have a fire extinguisher handy next time. Just throwing that out there.
"I should get some water on that!"
Me: Lol, wut?
_Pours dirt on it_
HAH!
Nice, new sub!
Thanks!
I don’t know how you can fly with it... in Betaflight you set the motor direction to be outer when you motors spins inner... but nice video!
A ratchet? Best way to strip them nuts, dude. No direct 'feel' with a ratchet. Other than that _very_ minor critique, great job! Always interesting to see new ideas.
Yup. Ratchets are great. Haven't stripped any propnuts yet. Thanks!
@@RCwithAdam1 I was a bicycle mechanic for a time. Learned the hard,expensive way, early on. Hope your luck holds out!
Were do you buy your rotors from
Racedayquads, getfpv, Banggood, or sometimes Amazon.
The Media Offline is from Resolve. You should generate/regenerate optimized media to get that to stop happening.
My drone is a wizard x220hv and I haven’t fly it yet and I have everything I just need to somebody teach me how you setup the switch or wherever you just did in the minute 6:55 can you help me on that ? Respond please, I buy the drone like 2 months ago and haven’t fly it 😩
If you look at 11:19 you can see smoke already coming up
Simon Minchington i had to click the timestamp three times til I finally saw the smoke... how did you notice it?? 😳😂
I watch UA-cam vids on my 85" TV...
That was just a sweet video to see! I haven't watched a truly entertaining qwad video in a while, and this one had me laughing! Good edit and a cool idea!
Thanks so much!! 😁
April fools is the best day on youtube
lol I forgot it was April 1st until I published this! No joke here, tho!😄
damn i thought was the battery caught on fire.. Good thing you didnt crash into someone house roof :( Stay safe
That brown granulated water is new to me ;o)
Lol yeah on my way to get the hose I remembered I had a sandbag!
Dayum bro, that B roll is amazing!
Thanks so much!!!
@@RCwithAdam1 even looks like it was shot all by yourself using judt a smartphone. Great results
anytime you put the battery pack on the bottom you run the risk of a puncture more so than if it were mounted on the top.
Adam check out cliff harvey rc. It’s right up your street 😉
Well... at least you gave it a descent burial . LOL :).
Lol
Oh and you should check motor temp often
Supongo que la cuarentena hace estas cosas eh....😆
Video idea- mount 2 cameras on drone front arms to get 3d =^) (hope you get wtf im sayin cus my eng is bad this time of day)
Adam, i modified my FLY Sky I6 Radio with 2 5dBi antennas, i added 2 rp-sma connectors , also flashed it with the 10 ch firmware, :D
Very cool! Have you noticed better range?
@@RCwithAdam1 havent tested well, i crashed it
i saw smome at 111:20 right bfore you armed the quad....lol You can even see it get sucked back down into the props when u arm lol
dam this video is 111 minutes long?
Reminds me of my 3 inch micro...
Well, it kind of epically failed, but at least it happened on film! Pretty amazing! Keep experimenting!
Thumb Up for the fire
The battery voltage shorted to the frame and to the metal bolts. Using used parts that were already configured to a different build insure added variables that causes bad shit to happen.
14:00 👍👍👍
O M G! Slap like now! 😂😂
Speedybee flex 25. Your design but in a pusher cinewhoop configuration.
Rip lol fella 😂
Happy turkey day🙏🤟
Same to you! 🙌
I was “Like” number 200, did I win a prize? Interesting idea, cool video, added wet sand to fpv shopping list😉
🏆
Dry sand will also work fine 👍🏻
I like your videos
Thank you!
@@RCwithAdam1 i am wondering if I can send you my own made 10dof flight controller board to test it on one of your quads and give me your openion
Looked to me like that bounce pushed that screw through your lipo packs poly cover and you had a thermal runaway. that fire was too violent to be just a short circuit to ground imho and a venting lipo certainly has enough heat to melt a screw head...
Hi! Nope, the battery is fine. I think the battery must have bridged through the screw.😮
lol i used that jb video too!
I don’t know if it’s just me, I’m new to this. But at about 11 minutes and 10 seconds, does motor number one propeller look wobbly? Or am I just paying too much attention to detail?
I'll be honest with my thought process my dood:
-Video shows up in my recommended.
- 🤔 "Interesting"
-Just another goofy dude trying to start a UA-cam channel, but let me see.
-B roll sells me.
-"Awe geez"
-Subscribed
Lol
I APPRECIATE your honest feedback!👍Thank you!😀 It helps me make better and better videos! and thanks for subscribing and giving this goof dude a shot! 🤪
The reference to bass got me.. lol