HEYS GUYS, LOVE BOTH SAWMILLS EACH HAVE THERE PLACE IN THIS WORLD , BUT I SURE LOVE THE OLD STUFF IT GETS THE JOB DONE . GLAD TO SEE THE OLD WAYS HAVEN'T BEEN LOST. THANKS FOR KEEPING IT ALIVE 👍👍👍
I personally enjoy both types of sawmills and I agree that Ms Brittany is a pretty off barrier. Hard work pays off most times in life. It would be nice to see more of the old circle mill in action.
There is something so satisfying about watching a huge circular sawmill make lumber. The sounds and all. I miss my old Foley Belsaw. Using a Woodland Mills now. Love it. But the power and the sound of a circular sawmill......
I enjoy watching both types of mills in operation but the old circle mills are a thing of the past in the present. Aside from watching you two during your regular routines of making a living I really enjoy seeing the partnership that is obvious between the two of you. To be able to do virtually everything together with the obvious love and respect you show each other is awesome to see. I watch every video you put out and look forward to seeing what you will do next. Your awesome!
I don't know a lot about saws in general, but I do know my father-in-law had an old circular saw and he loved it. And I enjoy seeing your wife working with you pulling slabs. Have a good day!
My dad had an old circle mill and like you I rode the carriage and set blocks. I was in my early 20"s then and pretty fast with math. It made sawing a lot faster! Love the old Detroit.
Love circular mills, seen dozens of them in use when i works for a native lumber dealer. And of course, adding the Detroit sound is the icing on the cake
10:30....your better half is indeed a very attractive woman, and part of that attraction is how hard of a worker she is, and what a good team you two make. I know zilch about milling, but one day when I grow up, I hope to get a mill of some kind!!!
I toattly agree with u on the circle sawmill. I just like a lot better. Yes ur off bearer is definitely pretty. She does an awesome job working. My hat off to Brittany ✌️
I have a fully manual bandmill. It is what I could afford. I would love a woodmizer lt40 wide. Circle mills I just prefer to watch. Kudos to your off bearer . Thumbs up on this video Wallace’s.
I second the motion on the circle mill. Circle has the rustic finish where the band mill has the smoother finish. Glad you use the circle mill this time as when I first started following you guys you were doing a lot of circle milling. Kudos to Britt for doing her job so well.
I love the circle saw mills. I enjoy sawmill videos (yours). You explain how you make lumber and problems to look for. I like the fact that you can look at a log and just tell how to cut it and how much you can get.
The circ sawmill speed is remarkable! Kerf is big, yeah, but the power and crisp edges (squareness) is impressive. Wear eye PPE! Can you adjust for log taper?
My dad was the sawyer on a circle mill. He would set the saw teethe and file his saw at lunch, when he needed to. I still have his swedge that he used to set the teethe and adjust the saw. I am going to be eighty years old, coming may 2025. You brought back some good memories. God bless.
I took some trees that were knocked down by Hurricane Camille to a circle sawmill and I rode the carriage to set the dogs and helped turn the logs. The motor was a six cylinder Cat and you didn't stall it down. My dad worked on one that had a straight 8 Buick engine. Those were the days. Have fun and stay safe!
I was thinking before you mentioned it that I was becoming weary of band saw milling. I enjoy your whole content, but it was happy to see the old mill today.
I was checking out some of your older stuff from about three years ago and just realized how ruff you all had it. I'm glad to see all the progress you've made. Great job. 👍
I like the old mill it's what I seen my whole young life I watched the horse's log the mill's when they use to set up on site and have worked at a mill.keep up the good work man.I'm watching from NC.
I prefer circle mill, yes I've operated one. Yes Brittany is best looking off mill and Tyler is the best operator and commentator. You guys make a great team in work and family life. God bless
Great video! I love your circle mill. The old Detroit sounds great too. Would really like to see more circle saw action. Love the rough cut saw kerf marks also
My Grangfather had an old saw mill. It was powered using a M & M (Minneapolis-Moline) tractor and belt pulley. We called it the thick and thin lumber company. If you looked at the finished product, the name was obvious. Did a lot of building on his farm and the mules never complained about the board thickness.
Back in 1969 to about 1973 I helped a couple of brothers at their saw mill . They were in their 70's it was their grandfather's sawmill. They used blades that were about 5 feet tall. Also had edger and planer.
Guys I follow in western Pennsylvania have this type of saw. They ist start with a metal detector to run all sides of logs The blade cuts through lumber like butter.
I watch 3 different sawyers on YT. All for different reasons. I watch Mark Galicic and Eddie Horvath with their 52 inch hydraulic Edmiston circle mill, Nathan Elliot at Out of the Woods with his LT70, and Wallace Farm. I have to say I like crcle mills best, but I watch Nathan and you two because of the variation in content. It's not just log after log. The newest development has me smiling from ear to ear as I spent years training cutting horses and driving teams.
I love the circle mill! When I got out the military I went to work with a man that had a circle mill. His son Keith rode the carriage and 2 of us would off bear.....it all worked out good. I wish I had took video of us working. It was a lot of fun...definitely stay in shape, He could rare back on that handle and zip thru a log in a flash. Use whatever mill you need for the job but I am partial to the circle mill!!
I do like the circular saw mill as well Tyler but I know for cutting pallet wood the Woodmizer is best. Thanks for taking us with you two on the ole Corley saw mill.
I'm a circle saw man to my friend my uncle popeye groves was a welder and he told me one time he had rather work at the sawmill than eat when he was hungry lol, Everytime he went out to work in the sawmill he would forget and lay his hammer down and it would go threw the chipper lol. More to work on lol
I like them both. After high school I worked at a sawmill for the summer. Dropping scrap boards below on a belt that fed a chipper. Send this video to Wrangler, they will see their "W" and hire Brittany for a model!
love to watch the old circle mill and the detroit my favorite ive had both but one man on circle is hard but your rite way more lumber with a circle both have their place but much rather watch a circle mill
I love the circle sawmill. I wish you and your sweetheart were wearing safety glasses, though.
Love the circle saw mill. More action. you are correct about your helper.
Definitely best looking saw lady on UA-cam she is just plumb cute
HEYS GUYS, LOVE BOTH SAWMILLS EACH HAVE THERE PLACE IN THIS WORLD , BUT I SURE LOVE THE OLD STUFF IT GETS THE JOB DONE . GLAD TO SEE THE OLD WAYS HAVEN'T BEEN LOST. THANKS FOR KEEPING IT ALIVE 👍👍👍
I absolutely love to hear a circle saw sing !!!!
The blade markings left on the end product are gorgeous,
The circle mills is wonderful. The wood smells so wonderful. 😂 😊 you s are very good and funny.
Love the old sawmill. Thanks for keeping it doing its job. The history is great!
Love the circle saw. And YES you have the prettiest assistant
I could watch the circular saw all day
I personally enjoy both types of sawmills and I agree that Ms Brittany is a pretty off barrier. Hard work pays off most times in life. It would be nice to see more of the old circle mill in action.
More will be coming soon!
Circular mill
I agree circular saw the best, even the sound, it sounds like a saw!!
Absolutely Tyler the circle saw mill is awesome
I always like to see the circle mill, but I enjoy all the milling videos you two do. Cheers!
Love to see the circle saw mill running!
Grew up with a rotary mill. That’s what’s in my blood. Love the old Detroit complete with it’s hydraulic governor.
Love the classic look of circle saw
❤love that circle saw❤
Just love to see older equipment of yesterday still in operation today.
Tyler, i like watching both. Each has it's own features to be interested in watching.
There is something so satisfying about watching a huge circular sawmill make lumber. The sounds and all. I miss my old Foley Belsaw. Using a Woodland Mills now. Love it. But the power and the sound of a circular sawmill......
Great circle saw milling. 👍👍👍
I like both mills. I like the cut marks a circle saw does.
Never a dull moment.
I enjoy watching both types of mills in operation but the old circle mills are a thing of the past in the present. Aside from watching you two during your regular routines of making a living I really enjoy seeing the partnership that is obvious between the two of you. To be able to do virtually everything together with the obvious love and respect you show each other is awesome to see. I watch every video you put out and look forward to seeing what you will do next. Your awesome!
Thanks so much!
I don't know a lot about saws in general, but I do know my father-in-law had an old circular saw and he loved it. And I enjoy seeing your wife working with you pulling slabs.
Have a good day!
My dad had an old circle mill and like you I rode the carriage and set blocks. I was in my early 20"s then and pretty fast with math. It made sawing a lot faster! Love the old Detroit.
Love circular mills, seen dozens of them in use when i works for a native lumber dealer. And of course, adding the Detroit sound is the icing on the cake
10:30....your better half is indeed a very attractive woman, and part of that attraction is how hard of a worker she is, and what a good team you two make. I know zilch about milling, but one day when I grow up, I hope to get a mill of some kind!!!
I’m always in a conflict of watching the board or broad. She wins most of the time.😊😊. Love everything you guys do, keep up the great work!
Engine sounds great !
I love the sound that a circle sawmill makes When cutting
I like the circle saw best. Especially steam powered ones.
Good to see the circle sawmill once again, while we understand why we don’t see it as much now. Wallace Farm & Sawmill rocks 🤘(yet again) 🙂
it's a "circular" saw mill, not "circle."
I toattly agree with u on the circle sawmill. I just like a lot better. Yes ur off bearer is definitely pretty. She does an awesome job working. My hat off to Brittany ✌️
Nice seeing the old SawMill.
like the circle saw.
Want to see more BIG SAW - SAWING!!! OLD SCHOOL ROCKS,,,, +AN. SMOOOTH
Circle Saw mill...all the way!!!
More Circle Sawmill! But I get a pretty good regular fix with Mark Galicic.
I like watching you use the circle saw
I have a fully manual bandmill. It is what I could afford. I would love a woodmizer lt40 wide. Circle mills I just prefer to watch. Kudos to your off bearer . Thumbs up on this video Wallace’s.
Circle saw all the way! Nostalgic and cool history. Love the Detroit!
I second the motion on the circle mill. Circle has the rustic finish where the band mill has the smoother finish. Glad you use the circle mill this time as when I first started following you guys you were doing a lot of circle milling. Kudos to Britt for doing her job so well.
I love the circle saw mills. I enjoy sawmill videos (yours). You explain how you make lumber and problems to look for. I like the fact that you can look at a log and just tell how to cut it and how much you can get.
The circ sawmill speed is remarkable! Kerf is big, yeah, but the power and crisp edges (squareness) is impressive. Wear eye PPE! Can you adjust for log taper?
My dad was the sawyer on a circle mill. He would set the saw teethe and file his saw at lunch, when he needed to. I still have his swedge that he used to set the teethe and adjust the saw. I am going to be eighty years old, coming may 2025. You brought back some good memories. God bless.
I took some trees that were knocked down by Hurricane Camille to a circle sawmill and I rode the carriage to set the dogs and helped turn the logs. The motor was a six cylinder Cat and you didn't stall it down. My dad worked on one that had a straight 8 Buick engine. Those were the days. Have fun and stay safe!
I loved our drink saw.
Like you, the woodmizer made us set our ring saw aside.
Always Circle!!! There isn’t a modern band mill that would still be around at the age of that circle mill!!!!
Enjoyed your video ! I helped my cousin mill logs into decorative beams in northern Idaho.
I own a manual band mill but i enjoy watching you, Mark, John run the circle sawmills.
Circle saw mill for me, any day of the week!
Like the sound of the circle sawmill
I used to off bear for my dad on my grandpa’s circle sawmill. He cut most of the lumber for the house I grew up in from logs cut on the farm.
I started watching you running your circle mill.
I was thinking before you mentioned it that I was becoming weary of band saw milling. I enjoy your whole content, but it was happy to see the old mill today.
I really enjoy your videos.My uncle had a mobile circular mill that he took to the site and sawed right on the property
I to love a circal saw mill it reminds me of my youth in upstate new york sawing hemlock
Love seeing the circle Saw Mill working and yes I have a band saw mill
I was checking out some of your older stuff from about three years ago and just realized how ruff you all had it. I'm glad to see all the progress you've made. Great job. 👍
Amazing old machine operated by AMAZING people.
I like the circle saw best. Been waiting on you putting the other circle saw together. I do have a bandsaw mill, I saw for my projects only.
I am at peace listening to you saw with that mill
I love that circle saw also, its cool
That Circle Saw is second to none. Your Grand Pa would have been proud. I'd like to see more. New Sub.
Thanks for the sub!
My other grandpa had one but the blade was half the size of yours, I like the way it cuts, takes no guff from anything👍
I like the old mill it's what I seen my whole young life I watched the horse's log the mill's when they use to set up on site and have worked at a mill.keep up the good work man.I'm watching from NC.
Love the circle, more please.
I prefer circle mill, yes I've operated one. Yes Brittany is best looking off mill and Tyler is the best operator and commentator. You guys make a great team in work and family life. God bless
CIRCULAR!!!!!!!!!
Great video! I love your circle mill.
The old Detroit sounds great too.
Would really like to see more circle saw action. Love the rough cut saw kerf marks also
I like to watch the circle saw mill the best . and you do have a good helper
You all got a very good thing going. America
Enjoy watching a circle saw mill run
My Grangfather had an old saw mill. It was powered using a M & M (Minneapolis-Moline) tractor and belt pulley. We called it the thick and thin lumber company. If you looked at the finished product, the name was obvious. Did a lot of building on his farm and the mules never complained about the board thickness.
Definitely the Circle sawmill. It is more interesting. But also more work. Love the videos.
This reminds me of my Grandfather who worked in a saw mill back in the early fifties. It was a circle mill. Great memories. Best wishes and blessings.
I like the circle mill, please bring us some more!
Circle sawmill is definitely faster than a ban mill....and when folks who really know how to run them they are very productive.
Love the circle saw mill. Next time could you explain how you set the depth of each cut with the lever that you pull?
I don't think it's possible for Brittney to make a "bad" thumbnail!! Another winner. Love the circle saw!!
The circle would be nice once in a while. You two are the best.
Great seeing the circle mill.
I like both the band mill and the circle mill. Thanks for the video!
Back in 1969 to about 1973 I helped a couple of brothers at their saw mill . They were in their 70's it was their grandfather's sawmill. They used blades that were about 5 feet tall. Also had edger and planer.
Guys I follow in western Pennsylvania have this type of saw.
They ist start with a metal detector to run all sides of logs
The blade cuts through lumber like butter.
That is a clever way to cantor the logs. I have never seen that done before
I have always liked the circle sawmills better. I like the teeth marks on the wood. It gives it character
I watch 3 different sawyers on YT. All for different reasons. I watch Mark Galicic and Eddie Horvath with their 52 inch hydraulic Edmiston circle mill, Nathan Elliot at Out of the Woods with his LT70, and Wallace Farm. I have to say I like crcle mills best, but I watch Nathan and you two because of the variation in content. It's not just log after log. The newest development has me smiling from ear to ear as I spent years training cutting horses and driving teams.
Definitely would like to see more circle milling.
love the circle saw
I love the circle mill! When I got out the military I went to work with a man that had a circle mill. His son Keith rode the carriage and 2 of us would off bear.....it all worked out good. I wish I had took video of us working. It was a lot of fun...definitely stay in shape, He could rare back on that handle and zip thru a log in a flash. Use whatever mill you need for the job but I am partial to the circle mill!!
I do like the circular saw mill as well Tyler but I know for cutting pallet wood the Woodmizer is best. Thanks for taking us with you two on the ole Corley saw mill.
You are a expert at any thing 😊
The circle saw mill for the win. The history alone makes it better.
I agree your off bearer looks a whole lot better than I ever looked taking off.
I'm a circle saw man to my friend my uncle popeye groves was a welder and he told me one time he had rather work at the sawmill than eat when he was hungry lol, Everytime he went out to work in the sawmill he would forget and lay his hammer down and it would go threw the chipper lol. More to work on lol
I like them both. After high school I worked at a sawmill for the summer. Dropping scrap boards below on a belt that fed a chipper.
Send this video to Wrangler, they will see their "W" and hire Brittany for a model!
Awesome video guys love the circle saw video
Totaly agree on your off-bearer, Lucky man you are!
Love the circle saw!
love to watch the old circle mill and the detroit my favorite ive had both but one man on circle is hard but your rite way more lumber with a circle both have their place but much rather watch a circle mill